NORSOK M-501 coating systems

Bulk supplied carbon steel valves with operating temperatures up to 150°C/302°F.Pre-qualification is not required

Product DFT (μm)Hempadur 85671 150Hempadur 85671 150Total 300

Product DFT (μm)Versiline CUI 56990 200Versiline CUI 56990 200Total 400

System 9Valves

Note 1: For temperatures above 150ºC thermally sprayed aluminium shall be used. This note applies to all of the above systems.

Note 2: An alternative system if agreed with the purchaser may be 1 x 75 μm zinc ethyl silicate and an epoxy tie-coat in accordance with System 1. Final coating shall then be done after insulation. Hempel recommend that this is used for uninsulated items only.

Note 3: Versiline® is a registered trademark of Hempel A/S.

Hempel A/S Lundtoftegaardsvej 91, 2800 Kgs. Lyngby, DenmarkTel: +45 4593 3800 Email: norsok@hempel.com norsok.hempel.com

V2_DEC_19

For advice on regional product availability and additional schemes, please contact your local Hempel representative or email protective@hempel.com