System 9 - hempel.cn
Transcript of System 9 - hempel.cn
NORSOK M-501 coating systems
Bulk supplied carbon steel valves with operating temperatures up to 150°C/302°F.Pre-qualification is not required
Product DFT (μm)Hempadur 85671 150Hempadur 85671 150Total 300
Product DFT (μm)Versiline CUI 56990 200Versiline CUI 56990 200Total 400
System 9Valves
Note 1: For temperatures above 150ºC thermally sprayed aluminium shall be used. This note applies to all of the above systems.
Note 2: An alternative system if agreed with the purchaser may be 1 x 75 μm zinc ethyl silicate and an epoxy tie-coat in accordance with System 1. Final coating shall then be done after insulation. Hempel recommend that this is used for uninsulated items only.
Note 3: Versiline® is a registered trademark of Hempel A/S.
Hempel A/S Lundtoftegaardsvej 91, 2800 Kgs. Lyngby, DenmarkTel: +45 4593 3800 Email: [email protected] norsok.hempel.com
V2_DEC_19
For advice on regional product availability and additional schemes, please contact your local Hempel representative or email [email protected]