YUPO® AISE-105 Specification SheetIML S-New Grade

Parameter Notes Units SpecificationThickness, Average 2 micron 107 +/- 7 Basis Weight, Average 2 g/m2 82.7 +/- 4.0 Opacity, Average 2 % 92.0 min. Gloss, Average - Adhesive 2 % 68 +/- 15 - Print Side 2 % 22 +/- 4 Whiteness, Average 2 WI 94.0 min. Surface Resistivity - Adhesive 2, 4 log(Ω/ ) 16.0 max. - Print Side 2 log(Ω/ ) 13.0 max. Tensile Strength - MD 2 kgf/15mm 4.0 min. - TD 2 kgf/15mm 12.5 min. 5% Elongation - MD 2 kgf/15mm 2.4 +/- 1.0 - TD 2 kgf/15mm 7.0 +/- 3.0 Tear Strength - MD 2 gf 35.0 +/- 9.0 - TD 2 gf 18.3 +/- 7.2 Clark Stiffness - MD 1, 2 s-value 11.0 min. - TD 1, 2 s-value 32.0 min. COF, MD - Static 3 TBD - Dynamic 3 TBD Notes Key:

AISE-105, version 4, 2008-May-08

1 - Stiffness increases with aging over the first month from date of manufacture.

3 - Parameter is report only; if range values given, use as reference only, not specifications. Product may be outside these limits.

4 - SSR decreases (improves) by ~ 1.0 over first two weeks from DOM. Value is as tested immediately after production.

This document provides our current specifications for AISE-105. Changes to these items may occur at the sole discretionof Yupo Corporation America. This issue supersedes any and all previous versions.

2 - Specification range shown