UTA Excel File
of 30
date post
20-Jan-2016Category
Documents
view
15download
0
Embed Size (px)
description
UTA
Transcript of UTA Excel File
Sheet1
A_SUMMARYTable A.1Variation in Low-Amplitude Shear Wave Velocity, Low-Amplitude Shear Modulus, Low-Amplitude Material Damping Ratio and Estimated Void Ratio with Isotropic Confining Pressure from RC Tests of Specimen UTA-62-A (1C)
Isotropic Confining Pressure, oLow-Amplitude Shear Modulus, GmaxLow-Amplitude Shear Wave Velocity, VsLow-Amplitude Material Damping Ratio, DminEstimated Void Ratio, e(psi)(psf)(kPa)(ksf)(Mpa)(fps)(%)1.52161091343.84838.830.414343221117456.35477.510.412686441154874.26256.850.39312172883199395.57076.200.3852434561652710129.98265.190.390
Table A.2Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from RC Tests of Specimen UTA-62-A (1C); Isotropic Confining Pressure, o = 6 psi (0.9 ksf = 41 kPa)
Peak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxAverage (1) Shearing Strain, %Material Damping Ratio (2), D, %3.78E-0415011.003.78E-04-7.33E-0415021.007.33E-046.351.46E-0314660.981.46E-036.512.70E-0313960.931.88E-036.625.38E-0312660.843.63E-037.36
(1) Average Shearing Strain from the First Three Cycle of the Free Vibration Decay Curve(2) Average Damping Ratio from the First Three Cyclce of the Free Vibration Decay Curve(-) High Noise Level Interferring with Damping Measurement
Table A.3Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from TS Tests of Specimen UTA-62-A (1C); Isotropic Confining Pressure, o = 6 psi (0.9 ksf = 41 kPa)
First CycleTenth CyclePeak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxMaterial Damping Ratio, D, %Peak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxMaterial Damping Ratio, D, %2.04E-0415001.001.122.04E-0415001.001.153.83E-0415001.001.163.85E-0414900.991.247.77E-0414700.981.247.81E-0414700.981.181.60E-0314300.951.511.60E-0314300.951.463.43E-0313400.892.373.48E-0313200.882.338.49E-0311200.755.008.74E-0310900.734.68
Table A.4Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from RC Tests of Specimen UTA-62-A (1C); Isotropic Confining Pressure, o = 24 psi (3.5 ksf = 165 kPa)
Peak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxAverage (1) Shearing Strain, %Material Damping Ratio (2), D, %1.37E-0427311.001.37E-04-2.60E-0427441.002.60E-045.095.06E-0427190.995.06E-044.951.01E-0327070.991.01E-035.031.85E-0326480.971.41E-034.893.69E-0325300.922.75E-035.287.62E-0323040.845.50E-035.911.53E-0219310.711.06E-026.89
(1) Average Shearing Strain from the First Three Cycle of the Free Vibration Decay Curve(2) Average Damping Ratio from the First Three Cyclce of the Free Vibration Decay Curve(-) High Noise Level Interferring with Damping Measurement
Table A.5Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from TS Tests of Specimen UTA-62-A (1C); Isotropic Confining Pressure, o = 24 psi (3.5 ksf = 165 kPa)
First CycleTenth CyclePeak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxMaterial Damping Ratio, D, %Peak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxMaterial Damping Ratio, D, %5.61E-0528001.000.705.55E-0527800.990.731.12E-0427901.000.841.11E-0428001.000.652.07E-0428001.000.762.08E-0427901.000.694.15E-0428101.000.794.17E-0428001.000.788.37E-0427800.990.918.38E-0427800.990.931.72E-0327200.971.251.72E-0327000.971.223.77E-0325700.922.033.80E-0325500.911.938.78E-0322400.803.518.93E-0321800.783.322.21E-0217600.637.822.25E-0217300.627.14
A.2Table A.2Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from RC Tests of Specimen UTA-62-A (1C); Isotropic Confining Pressure, o = 6 psi (0.9 ksf = 41 kPa)
Peak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxAverage (1) Shearing Strain, %Material Damping Ratio (2), D, %3.78E-0415011.003.78E-04-7.33E-0415021.007.33E-046.351.46E-0314660.981.46E-036.512.70E-0313960.931.88E-036.625.38E-0312660.843.63E-037.36(1) Average Shearing Strain from the First Three Cycle of the Free Vibration Decay Curve(2) Average Damping Ratio from the First Three Cyclce of the Free Vibration Decay Curve(-) High Noise Level Interferring with Damping Measurement
A.3Table A.3Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from TS Tests of Specimen UTA-62-A (1C); Isotropic Confining Pressure, o = 6 psi (0.9 ksf = 41 kPa)
First CycleTenth CyclePeak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxMaterial Damping Ratio, D, %Peak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxMaterial Damping Ratio, D, %2.04E-0415001.001.122.04E-0415001.001.153.83E-0415001.001.163.85E-0414900.991.247.77E-0414700.981.247.81E-0414700.981.181.60E-0314300.951.511.60E-0314300.951.463.43E-0313400.892.373.48E-0313200.882.338.49E-0311200.755.008.74E-0310900.734.68
A.4Table A.4Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from RC Tests of Specimen UTA-62-A (1C); Isotropic Confining Pressure, o = 24 psi (3.5 ksf = 165 kPa)
Peak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxAverage (1) Shearing Strain, %Material Damping Ratio (2), D, %1.37E-0427311.001.37E-04-2.60E-0427441.002.60E-045.095.06E-0427190.995.06E-044.951.01E-0327070.991.01E-035.031.85E-0326480.971.41E-034.893.69E-0325300.922.75E-035.287.62E-0323040.845.50E-035.911.53E-0219310.711.06E-026.89
(1) Average Shearing Strain from the First Three Cycle of the Free Vibration Decay Curve(2) Average Damping Ratio from the First Three Cyclce of the Free Vibration Decay Curve(-) High Noise Level Interferring with Damping Measurement
A.5Table A.5Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from TS Tests of Specimen UTA-62-A (1C); Isotropic Confining Pressure, o, = 24 psi (3.5 ksf = 165 kPa)
First CycleTenth CyclePeak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxMaterial Damping Ratio, D, %Peak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxMaterial Damping Ratio, D, %5.61E-0528001.000.705.55E-0527800.990.731.12E-0427901.000.841.11E-0428001.000.652.07E-0428001.000.762.08E-0427901.000.694.15E-0428101.000.794.17E-0428001.000.788.37E-0427800.990.918.38E-0427800.990.931.72E-0327200.971.251.72E-0327000.971.223.77E-0325700.922.033.80E-0325500.911.938.78E-0322400.803.518.93E-0321800.783.322.21E-0217600.637.822.25E-0217300.627.14
B_SUMMARYTable B.1Variation in Low-Amplitude Shear Wave Velocity, Low-Amplitude Shear Modulus, Low-Amplitude Material Damping Ratio and Estimated Void Ratio with Isotropic Confining Pressure from RC Tests of Specimen UTA-62-B (2C)
Isotropic Confining Pressure, o'Low-Amplitude Shear Modulus, GmaxLow-Amplitude Shear Wave Velocity, VsLow-Amplitude Material Damping Ratio, DminEstimated Total Unit Weight, tEstimated Void Ratio, e(psi)(psf)(kPa)(ksf)(Mpa)(fps)(%)(pcf)2216102196105.374713.121270.4363432202428116.478612.011270.4366864412859137.185215.091270.434121728833456170.094911.021270.4322434561654473214.410649.621270.4274869123305987287.012308.251280.421
Table B.2Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from RC Tests of Specimen UTA-62-B (2C); Isotropic Confining Pressure, o' = 6 psi (0.9 ksf = 41 kPa)
Peak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxAverage (1) Shearing Strain, %Material Damping Ratio (2), D, %2.35E-0428411.001.36E-0411.134.66E-0428411.004.66E-0411.578.67E-0428120.995.09E-0410.781.76E-0326750.941.03E-0310.963.65E-0324200.852.06E-0311.878.35E-0319820.704.42E-0313.84
(1) Average Shearing Strain from the First Three Cycle of the Free Vibration Decay Curve(2) Average Damping Ratio from the First Three Cyclce of the Free Vibration Decay Curve
Table B.3Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from TS Tests of Specimen UTA-62-B (2C); Isotropic Confining Pressure, o' = 6 psi (0.9 ksf = 41 kPa)
First CycleTenth CyclePeak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxMaterial Damping Ratio, D, %Peak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxMaterial Damping Ratio, D, %2.99E-0426701.011.482.99E-0426501.011.475.91E-0426200.991.765.96E-0426200.991.721.14E-0325500.961.791.15E-0325400.961.862.40E-0324000.912.442.45E-0323600.902.485.56E-0320800.793.835.70E-0320300.773.871.15E-0216800.645.421.21E-0216000.615.63
Table B.4Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from RC Tests of Specimen UTA-62-B (2C); Isotropic Confining Pressure, o' = 24 psi (3.5 ksf = 165 kPa)
Peak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear Modulus, G/GmaxAverage (1) Shearing Strain, %Material Damping Ratio (2), D, %9.27E-0543681.009.27E-057.361.75E-0443641.001.75E-0410.383.43E-0444141.013.43E-049.936.35E-0443811.006.35E-049.871.27E-0343310.991.27E-0310.042.58E-0341250.942.58E-0310.695.52E-0336960.845.52E-0312.021.24E-0230080.691.24E-0213.182.81E-0222670.521.51E-0213.45
(1) Average Shearing Strain from the First Three Cycle of the Free Vibration Decay Curve(2) Average Damping Ratio from the First Three Cyclce of the Free Vibration Decay Curve
Table B.5Variation in Shear Modulus, Normalized Shear Modulus and Material Damping Ratio with Shearing Strain from TS Tests of Specimen UTA-62-B (2C); Isotropic Confining Pressure, o' = 24 psi (3.5 ksf = 165 kPa)
First CycleTenth CyclePeak Shearing Strain, %Shear Modulus, G, ksfNormalized Shear M
