Net IO
description
Transcript of Net IO
Net IONet IO
Setup Alarm TunnelingSetup Alarm Tunneling
Setup Alarm BehaviorSetup Alarm Behavior Set Normally Open or ClosedSet Normally Open or Closed Set Normal or Supervised (1K Ω Set Normal or Supervised (1K Ω
Series R)Series R) Set input time filter (Static for none)Set input time filter (Static for none)
Set up remote tunnelSet up remote tunnel Set the Virtual Aux to the Set the Virtual Aux to the
destination ip addressdestination ip address Set the Aux number to the Aux Set the Aux number to the Aux
Output number to trigger Output number to trigger 1 for an N-1111 for an N-111 1 thru 6 for an N-6641 thru 6 for an N-664 1 or 2 for an N-TAH1 or 2 for an N-TAH 1 thru 4 for a CXB-6p-PoE1 thru 4 for a CXB-6p-PoE
Set up remote Aux Set up remote Aux BehaviorBehavior
Set the remote Aux to turn On or Off Set the remote Aux to turn On or Off (Set to the opposite of the “normal” (Set to the opposite of the “normal” state)state)
Set the Output trigger Duration. Set the Output trigger Duration. Typically “Follow”Typically “Follow”
Click “Save”Click “Save” Test with the ON and OFF buttonsTest with the ON and OFF buttons