Air power&emission extraction for auto/car/motor-SYLVAN

air compressor

PW0101

PW0103

PW0105

PW0102

PW0104

PW0106

Model PW0101 PW0102 PW0103 PW0104 PW0105 PW0106

Power(Kw/Hp) 1.5/2 1.5/2 1.5/2 1.5/2 7.5/10 oil engine

Voltage(V) 220 220 220 220 380

Cylinder Dia X No. Mm Φ47*1 Φ47*1 Φ47*1 Φ47*2 Φ90*2 Φ65*1 Φ90*2 Φ65*1

Speed(Rpm) 2850 2850 2850 2850 950 950

Max Pressure(Bar) 8 8 8 8 16 12.5

Delivery(L/Min) 130 130 130 250 900 900

Tank(L) 24 30 40 50 170 280

Weight(Kg) 23.5 25 37 35 180 190

Dimension(L*W*Hmm) 610*290*580 640*290*560 680*290*640 700*320*660 1430*570*1000 1270*570*1100

BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTDTEL: 86-10-56292661-10 86-10-56292661-16

ADD: ROOM 20C, BUILDING A, ZhENGDONG INTERNATIONAL PLAZA, JIA 2,DONGZhIMEN WAIxIAOJIE, DONGChENG DISTRICT, BEIJING 100027, P. R. ChINA WEB: WWW.SYLVAN.CO

GAS AND POWER SUPPLY EQUIPMENT EXHAUSTING GAS EXTRACTION SYSTEM

air compressor

PW0107

PW0109 PW0110

PW0111

Model PW0107 PW0108 PW0109 PW0110 PW0111

Power(Kw/Hp) 2.2/3 4/5 4/5 7.5/10 7.5/10

Voltage(V) 220 380 380 380 380

Cylinder Dia X No. Mm Φ65*2 Φ90*2 Φ90*1 Φ65*1 Φ90*3 Φ90*2 Φ65*1

Speed(Rpm) 950 950 950 950 950

Max Pressure(Bar) 8 8 12.5 8 12.5

Delivery(L/Min) 250 600 600 900 900

Tank(L) 70 110 110 170 170

Weight(Kg) 72 146 146 180 180

Dimension(L*W*Hmm) 1080*440*810 1250*440*910 1250*440*910 1430*570*1000 1430*570*1000

PW0108



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

air compressor

PW0112 PW0113 PW0114 PW0115

Model PW0112 PW0113 PW0114 PW0115

Power(Kw/Hp) 7.5/10 7.5/10 7.5/10 7.5/10

Voltage(V) 380 380 380 380

Cylinder Dia X No. Mm Φ105*2 Φ55*1 Φ105*2 Φ55*1 Φ105*2 Φ55*1 Φ105*2 Φ55*1

Speed(Rpm) 950 950 870 870

Max Pressure(Bar) 12.5 16 12.5 16

Delivery(L/Min) 1050 1050 1050 1050

Tank(L) 320 320 320 320

Weight(Kg) 300 300 300 300

Dimension(L*W*Hmm) 1800*710*1220 1800*710*1220 1650*650*1400 1650*650*1400




screw air compressor

1. Air end&ElectromotorØ Air end: The original package import supplied by Walker Druckluft-Technik from Germany. High

efficiency, Low rotate speed, Long life.Ø Electromotor:IP44~54,Class F insulation, Import SKF bearings.Ø Coupling:Exact gear drive, tranquilization,high efficiency,long life design.

2. PLC programmable microcomputer control & intelligent maintenance showØ Advanced PLC program microcomputer control system, can check the potential failures of air

compressor system automatically, the warning and failure can be showed on the LCD screen, SYLVAN compressors can be ensured run 24h/day without fault.

Ø Control mode & elements

3. Air FilterØ model tailor-made advance filter air filter precision < 3^Ø Filtrate the air surrounding first, and then enter air filter, ensure the clear air get into the compressor for

compressing. Protect the lubricating oil from polluted, prolong the life of compressor.

4. Air intake valveØ Using the Germany Walker company expert valve.Ø check valve can be prevented oil spout because of power cut abrupt.Ø Compressor starting: intake valve close, insure start up with low start electric current.Ø After started: intake valve open,100%air breath in, the machine unit working in order.Ø Working pressure approach enactment: intake valve drop off, electricity drop off, saving power.Ø Working pressure achieve enactment: air in valve all closed, compressor free loading working, saving

more power.

5. Oil-air separating systemØ Import from Germany MANN

6. Air coolerØ Low noise, big size fan from Danmark.

7. sound insulation coverØ The sound insulation cover can make noise lower than 78dB(A), accord with ISO2151 standard.

8. Oil filterØ Germany MANN

PRODUCTION ADVANTAGE



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M


PW0116

PW0119

PW0117

PW0120

PW0118

PW0121

PW0122

Type Motor power (Hp/kw) Working pressure (Bar) Capacity (m3/min'1) Noise dB(A) Power (V/Hz/Ph) Size LXWXH(mm) Weight (kg) Exit(")

PW0116 7.5/5.5 7 ~12.5 0.8/0.4 65 380/50/3 770 X 600 X 960 180 3/4"

PW0117 10/7.5 7 ~12.5 1.1/0.6 65 380/50/3 770 X 600 X 960 185 3/4"

PW0118 15/11 7 ~12.5 1.6/1.2 65 380/50/3 770 X 600 X 960 190 3/4"

PW0119 20/15 7 ~12.5 2.5/1.6 68 380/50/3 980 X 870 X 1220 350 1"

PW0120 25/18.5 7 ~12.5 3.0/2.2 68 380/50/3 980 X 870 X 1220 370 1"

PW0121 30/22 7 ~12.5 3.6/2.4 68 380/50/3 980 X 870 X 1220 405 1"

PW0122 40/30 7 ~12.5 5.2/3.6 70 380/50/3 1220X1150X1440 715 1"-1/2"

- German new type screw rotor, SYLVAN is the only manufacturer of the German Wolkair products.

- German Wolkair screw air ends and intake valves are the key parts of the SYLVAN air compressor to ensure the Energy consumption level is Level 1/Level2.

- This component integrate the Oil/air separator, minimum pressure valve, safety valve and pressure sensorinto one unit. Reduce the oil consumption and is easy for maintenance

German new type screw rotor

Screw air ends/in-take control valve

Innovating external oil/air separator component





Type Motor power (Hp/kw) Working pressure (Bar) Capacity (m3/min'1) Noise dB(A) Power (V/Hz/Ph) Tank(L) Size LXWXH(mm) Weight (kg) Exit(")

PW0123 5.5/7.5 7~10 0.8~0.6 66 380/50/3 230 1600x500x1000 352 3/4"

PW0124 7.5/10 7~10 1.1~0.8 68 380/50/3 230 1600x500x1000 359 3/4"

PW0125 15/11 7~10 1.6~1.4 68 380/50/3 230 1600x650x1200 397 3/4"

PW0126 15/20 7~10 2.5-2 73 380/50/3 500 1600x680x1450 518 1"

PW0127 18.5/25 7~10 3-2.7 73 380/50/3 500 1600x680x1450 523 1"

PW0128 22/30 7~10 3.6~3.2 73 380/50/3 500 1600x680x1450 563 1"

Air ends for air compressors

PW0123

PW0125

PW0127

PW0124

PW0126

PW0128



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

- The Profile:according to SYLVAN German company rotor profile levels of energy efficiency standards for new optimization, also can guarantee good performance even in extreme conditions.

- Rotor grinding:German precise grinding machine are processing and checking. - Bearing:use SKF high quality thrust and radial bearing. 4.Shaft seal / sleeve:the

famous German brand lip seal / sleeve. - 5Driving mode:2P 1:1 direct driven or gear / belt driven.

- With freezing drier and refined filter inside and 230L/500L horizontal air reservoir

- Continuously produce compressed air with no oil, no moisture and no impurities

Type Motor power (Hp/kw) Working pressure (Bar) Capacity (m3/min'1) Noise dB(A) Power (V/Hz/Ph) Tank(L) Size LXWXH(mm) Weight (kg) Exit(")

PW0129 5.5/7.5 8~10 0.8/0.7/0.6 65 380/50/3 270 1450x600x1530 490 3/4"

PW0130 7.5/10 8~10 1.1/1/0.8 65 380/50/3 270 1450x600x1530 500 3/4"

PW0131 15/11 8~10 1.6/1.5/1.4 65 380/50/3 270 1450x600x1530 540 3/4"

PW0132 15/20 8~10 2.5/2.3/2 68 380/50/4 500 1560x900x1600 700 1"


PW0129

PW0131

PW0130

PW0132




Vertical air - sealed gasholder

PW0301

PW-2

PW-3

Air receive

refrigerAted Air dryer

Dimension(mm):800X2400Volume:1m3

Weight:300kg

Working Pressure:0. 2~1.OMPa (Optional1.0~3.0MPa)Dew-point:≤-239C Cooling Type:Air DryInlet Temp:≤45˚CEnvironment Temp:≤38˚C

Features

Technical Date

Model Rated Air Flow(Nm3/h)

Inlet\OutletDN(mm)

Power Supply(V/Hz)

Power(KW)

Dimension(mm)(L ×W×H)

Weight(kg)

PW-2 2 25220/50

0.28 650×420×670 55PW-3 3 32 0.74 750×480×810 80



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

QUicK coUple

Advantage:high flow, low depressurization, double sealing and double leakage-proof, crash proof, many kinds of link methods.Applicable products: Pneumatic tools, car manufacturing, air compressor and so on.Pressure:1~15kgTemperature:- 20˚C~+80˚C

Main part Steel hardening treatment

Sealing ring ButyronitrileSteel ball SUS301




QUicK coUple

One tOuch cOupler--sOcket One tOuch cOupler--plug

Model Dimension MaterialL1 L2 L3 PT D1 D2 D3 S

PW0100-MM10C 39 21 5 5 1/4 13 10.9 7 14 SteelPW0100-MM20C 39 21 5 5 3/8 13 10.9 7 17 SteelPW0100-MM30C 39 21 5 5 1/2 13 10.9 7 22 Steel


PW0100-MF10C 36 21 5.5 1/4 13 10.9 7 17 SteelPW0100-MF20C 36 21 5.5 3/8 13 10.9 7 19 SteelPW0100-MF30C 36 21 5.5 1/2 13 10.9 7 24 Steel

Model Dimension MaterialL1 L2 L3 D1 D2 D3 D4 D5 S

PW0100-MC10C 42 21 5.5 7 3.5 13 10.9 7 14 SteelPW0100-MC20C 42 21 5.5 9 5 13 10.9 7 14 SteelPW0100-MC30C 42 21 5.5 11 6 13 10.9 7 16 Steel

Model Dimension MaterialL1 L2 L3 D1 D2 D3 D4 D5 D6

PW0100-MT10C 51 21 5.5 15 7 3.5 13 10.9 7 SteelPW0100-MT20C 51 21 5.5 15 9 5 13 10.9 7 SteelPW0100-MT30C 51 21 5.5 15 11 6 13 10.9 7 SteelPW0100-MT40C 51 21 5.5 15 13 9 13 10.9 7 Steel

Model Dimension MaterialL PT D S

PW0100-FT10C 75 7 3.5 19 SteelPW0100-FT20C 75 9 5 19 SteelPW0100-FT30C 75 11 6 19 SteelPW0100-FT40C 75 13 9 19 Steel


PW0100-FF10C 59 1/4 8 19 SteelPW0100-FF20C 59 3/8 8 19 SteelPW0100-FF30C 59 1/2 8 24 Steel


PW0100-FM10C 57.5 1/4 6 19 SteelPW0100-FM20C 57.5 3/8 8 19 SteelPW0100-FM30C 57.5 1/2 10 22 Steel


PW0100-FC10C 60.5 7 3.5 19 SteelPW0100-FC20C 60.5 9 5 19 SteelPW0100-FC30C 60.5 11 6 19 Steel

For chiNa



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

QUicK coUple

One tOuch cOupler--sOcket

Model specification Material

PW0100-FM10CP 1/4" SteelPW0100-FM20CP 3/8" Steel

PW0100-FM30CP 1/2" Steel

Model specification MaterialPW0100-FT10CP 7mm SteelPW0100-FT20CP 9mm SteelPW0100-FT30CP 11mm Steel

PW0100-FT40CP 13mm Steel

Model specification Material

PW0100-FF10CP 1/4" SteelPW0100-FF20CP 3/8" Steel

PW0100-FF30CP 1/2" Steel

Model specification MaterialPW0100-FC10CP 7mm Steel

PW0100-FC20CP 9mm Steel

PW0100-FC30CP 11mm Steel

For chiNa

PW0100-W2A PW0100-W3A PW0100-W4A

PW0100-W2B PW0100-W3B PW0100-W5A




QUicK coUple



PW0100-FM10E 57.5 1/4 6 19 SteelPW0100-FM20E 57.5 3/8 8 19 SteelPW0100-FM30E 57.5 1/2 10 22 Steel


PW0100-FT10E 75 7 3.5 19 SteelPW0100-FT20E 75 9 5 19 SteelPW0100-FT30E 75 11 6 19 SteelPW0100-FT40E 75 13 9 19 Steel


PW0100-FF10E 59 1/4 S 19 SteelPW0100-FF20E 59 3/8 8 19 SteelPW0100-FF30E 59 1/2 8 24 Steel


PW0100-FC10E 60.5 7 3.5 19 SteelPW0100-FC20E 60.5 9 5 19 SteelPW0100-FC30E 60.5 11 6 19 Steel

For eUrope

Model Dimension MaterialL1 L2 L3 D1 D2 D3 D4 D5 S

PW0100-MC10E 45 24 5.5 7 3.5 11.8 8 5 14 SteelPW0100-MC20E 45 24 5.5 9 5 11.8 8 5 14 SteelPW0100-MC30E 45 24 5.5 11 6 11.8 8 5 16 Steel


PW0100-MF10E 39 5.5 1/4 11.8 8 5 17 SteelPW0100-MF20E 39 24 5.5 3/8 11.8 8 5 19 SteelPW0100-MF30E 39 24 5.5 1/2 11.8 8 5 24 Steel


PW0100-MM10E 42 21 5.5 1/4 11.8 8 5 14 SteelPW0100-MM20E 42 24 5.5 3/8 11.8 8 5 17 SteelPW0100-MM30E 42 24 5.5 1/2 11.8 8 5 22 Steel

Model Dimension MaterialL1 L2 L3 D1 D2 D3 D4 D5 D6

PW0100-MT10E 5-1 34 5.5 14 7 3.5 11.8 8 5 SteelPW0100-MT20E 54 24 5.5 14 9 5 11.8 8 5 SteelPW0100-MT30E 54 24 5.5 14 11 6 11.8 8 5 SteelPW0100-MT40E 54 24 5.5 14 13 9 11.8 8 5 Steel



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

QUicK coUple



PW0100-FM10A 51 1/4 6 14 SteelPW0100-FM20A 51 3/8 6 17 SteelPW0100-FM30A 51 1/2 6 22 Steel

Model Dimension MaterialL D1 D2 S

PW0100-FT10A 60 7 3.5 14 SteelPW0100-FT20A 60 9 5 14 SteelPW0100-FT30A 60 11 6 14 Steel


PW0100-FF10A 53 1/4 6 17 SteelPW0100-FF20A 53 3/8 6 19 SteelPW0100-FF30A 53 1/2 6 24 Steel

Model Dimension MaterialL D1 D2 S

PW0100-FC10A 54 7 3.5 14 SteelPW0100-FC20A 54 9 5 14 SteelPW0100-FC30A 54 11 6 16 Steel

For america

Model Dimension MaterialL1 L2 D1 D2 D3 D4 S D5

PW0100-MC10A 42 21 7 3.5 8.3 4.5 14 5 SteelPW0100-MC20A 42 21 9 5 8.3 4.5 14 5 SteelPW0100-MC30A 42 21 11 6 8.3 4.5 16 5 Steel


PW0100-MF10A 36 21 1/4 8.3 4.5 17 5 17 SteelPW0100-MF20A 36 21 3/8 8.3 4.5 19 5 19 SteelPW0100-MF30A 36 21 1/2 8.3 4.5 24 5 24 Steel

Model Dimension MaterialL1 L2 PT D1 D2 D3 S

PW0100-MM10A 39 21 1/4 6 8.3 4.5 17 SteelPW0100-MM20A 39 21 3/8 8 8.3 4.5 19 SteelPW0100-MM30A 39 21 1/2 10 8.3 4.5 24 Steel

Model Dimension MaterialL1 L2 D1 D2 D3 D4 D5 D5

PW0100-MT10A 42 21 12 7 3.5 8.3 4.5 8 SteelPW0100-MT20A 42 21 12 9 5 8.3 4.5 8 SteelPW0100-MT30A 42 21 14 11 6 8.3 4.5 8 Steel




- The wall type design saving working space and making floor clear and tidy - Shell made from engineering plastic, s hose made from seamless polyurethane materials,

strong and durable. - Internal plate spring with good quality, long trouble-free operation - Shell made from engineering plastic, hose made from seamless polyurethane materials, strong

and durable. - The retractable mouth with plastic roller ensures the stretch and shrinking smoothly. - Lock up point for every 50cm, stretching and contraction extremely smooth

Model PW-DA612 PW-DA812 PW-DA1010

Tracheal Length 10/12M 10/12M 8/10M

Tracheal Inner Diameter 6.5MM 8MM 10MM

The joint of exit pipe Fast adapter

The intake pipe length 1 M

Bear maximum pressure 15BAR

Working temperature -15˚C-40˚C

Transmission medium Compressed air, cold water

Hose materials PU tube containing yarn

Weight 4KG

cable drUm

retrActAble WOrk light cAble reel

PW-DED2

PW-DLD4PW-DLD3

PW-DLD5

PW-DLD6

SOCKET

LED

INCANDESCENT

Various models, fastidious material, strong& durable, beautiful and generous appearance;All the products have got the European Union CE certification;

Features - The wall type design saving working space and making floor clear and tidy - Shell made from engineering plastic, hose made from seamless polyurethane materials, strong

and durable. - Slipping brush connecting, stable performance (for power drum) - The coil spring with high-grade quality, long trouble-free operation. - The retractable mouth with plastic roller ensures the stretch and shrinking smoothly. - Lock up point for every 50cm, stretching and contraction extremely smooth

Work Light Performance - Switch on the handle, easy to operate - Free tunable hook, and hook can turn freely, convenient for fixed and adjustment

Save 30% of electricity, 50% light intensified, LED lamp holder with magnets

PW-DLD3/PW-DLD4: Cold light source, eight times longer performance life than ordinary light, no heating and low energy consumption

Model PW-DED2 PW-DLD3 PW-DLD4 PW-DLD5/PW-DLD6

Light Type Incandescent Incandescent Incandescent LED

Cable Length 10/12M 10/12M 10/12M 10/12M

Input voltage 230V 230V 250V 230V

Work light IP Level IP20 IP55 IP20 IP55

Cable IP Level IP42 IP42 IP42 IP42

Power 300W 100W 60W 60W

Weight 4. 2kg 4. 2kg 4. 2kg 4. 2kg

retrActAble WAter/Air hOse reel retrActAble WAter

PW-DA612

PW-DA812

PW-DA812SPW-DA1010



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

cOmbinAtiOn-bOx

PW-DC2

PW-DC4

PW-DC3

PW-DC5

FeaturesThis combination-box can be the compressed air, power supply, 5kg ordinary pressure water, foam, water candle, according to the different needs of location for any matching, up to five combination, it can improve the working environment, improve the work efficiency. Applies to the Auto shop, car maintenance shop, car body shop, car training school and other places

Product model Technical parameter

PW-DC2 2 coiling lines device,size:410*380*420mm

PW-DC3 3 coiling lines device, size:610*380*420mm



cable drUm

Fish tape

PW-FT50

PW-FT100

PW-FT200

Specification: - Cable length 50ft/15m; 100ft/30M; 200ft/60M - High-impact plastic case; - Durable nylon handle

Function: - For pulling electrical or telecommunication wire

Item Number Pcs/ctn G.W./N.W. Dimension Q'TY/20’ Q'TY/40'

PW-FT50 12 13/11.5kgs 43x23x27.5cm 13200pcs 26400pcs

PW-FT100 6 13/11 kgs 39x33x25cm 5922pcs 12000pcs

PW-FT200 6 20/15kgs 39x33x25cm 5922pcs 12000pcs

US$5.92

US$9.10

US$12.52




Vehicle exhaUst extractioN

exhAust rAil system pW0401/pW0402

PW0401 PW0402

Remove exhaust fumes from stationary vehiclesVehicle exhaust fumes are a hazard in vehicle repair workshops, car inspection stations and alike. A prosperous business with a high-quality image should be a safe, tidy and well-organized workshop. SYLVAN has cost-effective products and complete system solutions for vehicle exhaust fume extraction. We help you all the way, from designing and planning to installation, service and maintenance.

Vehicle exhaust extraction on rail for all kind types of workshopsEasy to handle systems for all types of workshops;Consists of a basic rail system which is completed with an exhaust extraction kit;Very high extraction efficiency;One extraction unit can serve several workbays;Extraction units are easy to move, thanks to light-weight material and sliding carriage. - Compact, modern design - Easy to position - Automatic damper for airflow control - Quick and simple installation reduces cost

Optional

No. Name ref. Unit QTY

1 Aluminum fan/VentilatorPW0400-12 for Total length≤16mPW0400-13 for Total length≤28mPW0400-14 for Total length≤40m

set 1

2 Aluminum track/rail PW0400-01 m 163 Aluminum alloy carriage/trolley PW0400-21 set 2

4 HosePW0400-31(3M)PW0400-33(3M)PW0400-35(3M)

pcs222

5 Nozzle PW0400-42 pcs 26 Rail channel coupler and end cap PW0400-51 and PW0400-53 series 27 ceiling/wall fixtures based on the actual situation series 18 Switch and wires based on the actual situation series 1NOTE:

Bracket for Fan PW0400-56 set 1

Remote control box PW0400-61 pcs 1

Terminal filter PW0400-71 set 1

Nozzles

PW0400-42PW0400-43APW0400-43BPW0400-43CPW0400-43DPW0400-43EPW0400-43FPW0400-43GPW0400-43HPW0400-44A

pcs 1

Configurations

Side mounted motor

Top mounted motor



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

exhAust rAil system pW0403/pW0404/pW0405/pW0406

PW0404 PW0403

No. Name ref. Unit PW0404 PW0403


set 1 1

2 HosePW0400-31PW0400-33PW0400-35

m888

888

3 Nozzle PW0400-42 pcs 1 14 ceiling/wall fixtures based on the actual situation series 1 15 Switch and wires based on the actual situation series 0 16 Motor -- set 0 1NOTE: 1 set of ventilator for 4 sets of hose reels

No. Name ref. Unit PW0406 PW0405


set 1 1

2 HosePW0400-31PW0400-33PW0400-35

m 8 8

3 Nozzle PW0400-42 pcs 1 14 ceiling/wall fixtures based on the actual situation series 1 15 Switch and wires based on the actual situation series 0 16 Motor -- set 0 17 Aluminum track/rail PW0400-21 m 8 8

8Rail channel coupler and end cap

PW0400-51 and PW0400-53 series 1 1

9 ceiling/wall fixtures based on the actual situation series 1 1NOTE: 1 set of ventilator for 4 sets of hose reels

Model AØ(min) D (mm) F (mm) H(mm) L(mm) OØ(mm) P (mm) RØ(mm) T (mm) U (mm) Kg

PW0404 510 461 575 600 735 80 644 1130 876 112 37

PW0403 510 440 575 600 735 80 644 305 743 76 25


Electric motor driven or spring recoil exhaust extraction of vehicle diesel fumesThe best solution in workshops with a high ceiling where overhead cranes etc. have to be considered, or where high vehicles must pass; A receiving eye on the reel shows the status of operation. Fan start/stop is automatically controlled. Mounting of fan on reel is possible.Suitable for car factories and garages, especially for garages where the workbays are arranged irregularly

Configurations

Dimension

Dimension

MOTOR DRIVE SPRING DRIVE

Features - Convenient and safe operation - Compact, modern design - Quick & easy installation reduces cost - Every Reel could be used for 2

workbays - For spring drive type, the tightness

of the spring could adjusted easily outside of the reel.

PW0406 PW0405

Model AØ(min) B(mm) C(mm) D(mm) E(mm) F(mm) G(mm) I(mm) H(mm) L(mm) M (mm) N(mm) OØ(mm) P(mm) RØ(mm) Q(mm) T(mm) Kg

PW0405 510 715 180 440 153 572 143 456 600 1080 270 250 75 644 305 148 1085 50

PW0406 510 715 180 440 153 572 143 456 600 1080 270 250z 75 644 305 / 950 30

SPRING DRIVE MOTOR DRIVE




Vehicle exhaUst extractioNOn flOOr exhAust extrActiOn system

mObile exhAust extrActiOn system

PW0408

PW0407BPW0407A

No. Name ref. Unit QTY NOTE1 Trolley PW0407B m 1 Easy to move with wheel lock

2 Control box PW0400-62 series 1 control the fan

3 Al fan/Ventilator PW0400-11 set 1 Low noisy and large air flow

4 Hose PW0400-31 m 5 Temperature resistance 400˚C frame type

5 Nozzle PW0400-42 pcs 1 Temperature resistance 380˚C silicone rubber

6 Hose clamp -- set 2 Fixing the hose onto the Trolley

Voltage 220V /50 Hz Wire length 5m

Power 370W Weight 5kg

Air flow 1200m³/h Max vacuum degree 1200mmH2O

In the "On- floor" system a lid in the floor is opened and a hose kit is attached to the extraction outlet when used. After the work is done, the hose is removed to its storing place and the lid is put back in closed position. Suitable for car assembly factory, vehicle show room and schools where the Exhaust rail system could not or is not suitable to fix; and the underground pipe should be buried in advance

Features: Full flexibility to choose among SYLVAN hoses up toØ75mm (3m) , also high temperature hoses. Full flexibility to choose from SYLVAN nozzlesNo leakage flow in between hose and floor outlet. The whole fan capacity is used for exhaust extraction

Functions:Mobile exhaust extraction system has been studied to solve the problem of gas exhaust extraction from vehicles during the motor test operations in closed room without ant extraction systems fixed on the wall or on the ceiling. Practical because it is trolley mounted and therefore can be positioned anywhere.It’s enough to connect electrically the portable cleaner placing the expulsion piping outward to guarantee an environment without any bad emissions. The reduced weight and dimensions will help to put the portable fan outside the working places.

Configurations

Configurations

Specifications

Features: - The system allows the

gases extraction by placing near to the exhaust pipe the suitable intake fixed manually at the right height on a pole thanks to a sliding mechanical block device.

- The range includes also positioning device and accessories to be utilized on double exhaust pipes or in particular position.

- The gas extraction is made by a suitable aspiration group that guarantees the fumes extraction through a hosing heat resistant up to 200°C supplied with the system.

No. Name ref. Unit QTY NOTE

1 Trolley PW0407B m 1 Easy to move with wheel lock

2 Floor traps PW0407A series 1 control the fan

3 Hose PW0400-31 m 3 Temperature resistance 400˚C frame type

4 Nozzle PW0400-42 pcs 1 Temperature resistance 380˚C silicone rubber

5 Hose clamp -- set 2 Fixing the hose onto the Trolley



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

FunCTionAL MoDuLES

PW0400-01

PW0400-52 PW0400-51

PW0400-53

PW0400-55

PW0400-54

PW0400-56

The design of the sealing rubber strips makes it easy and quick to fix, avoiding nocking and pressing methodHigh sealing tightness; The neoprene seal lips is wear-resistant, themostable and corrosion preventive

Aluminum trAck/rAil

Large size square rail of is made of extruded aluminum#6063; Big air flow capacity and easy to install; Patent right protectionLight weighted and of high mechanical strength, anti-deformed and anti-corrosiveProcessed through sand blasting and oxidation coating treatment to keep color for ever

Standard connecting joints, strong, firm and not easy to deformFasten screws to make the connecting perfect, easy to operateTiny gap to guarantee the sealing; no damage to interface to make sure good appearance

Specifications

Rail accessories

Rail connection bar

Rail end outlet

Rail end coverSuspension bracket

Wall bracket

Top connection cone to fan

PW0400-21

Aluminum motor shell makes the ventilator light weighted and rustproof; heat could be dispatched quickly to prolong the life;Aluminum alloy fan body; big air flow and low noisyDiameter of inlet is Ø160mm, outlet Ø 110mm; suitable for most of PVC pipes in the marketEasy to fix the pipe onto the ventilator

cArriAge/trOlley




FunCTionAL MoDuLES

PW0400-31PW0400-32

PW0400-35PW0400-36

PW0400-11

PW0400-33PW0400-34

PW0400-13PW0400-12

PW0400-14Made of extruded aluminum alloy, antirust and anti-corrosive;Oxidation coating treatmentStrong rubber rolls make the sliding easier to reduce damage to railInlet opening and outlet part are made of stainless steel

Polyester fabric with silicone rubber coatingNylon coil black reinforced hose for max temp of 200°C. They are resistant against oil, grease, and solvents; the exhaust hose is traversable conditionally. A scouring protection plate protects against abrasion at the outer layer. Suitable especially for motor driven and spring operated hose reels, extraction rail channels as well as wall mounted units and vehicle exhaust extraction units for emission tests.

hOse

Aluminum fAn/ventilAtOr

Model Dimension Color

PW0400-31 Ø75mm Black




PW0400-35 Ø75mm Blue coil

PW0400-36 Ø100mm Black coil

Model Voltage RPM Power Air flow

PW0400-11 3P/220/50HZ 2800rpm 0.37kw 1200CBM/HR

PW0400-12 3P380V 60HZ 1400rpm 0.75kw 2800CBM/HR



rubber nOzzle

PW0400-42

PW0400-43A

PW0400-43B

PW0400-43C

PW0400-43D

SIZE (mm) Body Material

Ø140 Silicon Rubber


110X205x320 Silicon Rubber







PW0400-43F

PW0400-43G

PW0400-43i

PW0400-43H


120x150 Silicon Rubber

SIZE (mm) Body Material170x290x300 Silicon Rubber




180X330 Silicon Rubber


150X340 Silicon Rubber

PW0400-43E

PW0400-44A

PW0400-44B

stAinless steel nOzzle


Ø75mm Stainless steel


Ø75 X175 Stainless steel

Made of silicon rubber with temperature resistance up to 380˚C, wear-resistant and anti-corrosionConnector made of stainless steelChangeable covers for different vehiclesDetection opening for emission inspection



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

stAinless steel nOzzlePW0400-71Triple filtering layers; Air flow rate 2800CBM/HRAdsorbing noxious gas such as HC, CO, NO, as well as CO2 up to international environmental emissions standardsMade by a whole metal plate with comprehensive spray coating;Wall-mounted type makes installation easyConvenient to change the activated carbonAble to cut down the outlet noise

terminAl filter

FunCTionAL MoDuLES

PW0400-61

PW0400-81

PW0400-62

Remote control to start the ventilatorTo change the speed automatic or manuallyInstruction lights make it easier to inspect the working situation timelyMoisture proof and high security

Self-locking controlEasy operationMoisture proof and high security

Balancer for vehicle exhausting hoseThe balancer is used to keep the exhaust extraction hose clear of the ground, thus minimizing the risk of damage to the hose and surroundings. It also enables easy operation of the exhaust extraction system.Adjustable cable stop makes it easy to set the overhead drop at desired height.FeaturesAdjustable tension of springStrong but lightweightSpecial design with fine paintingRatchet locking device to adjust the length of steel cable

cOntrOl bOx

bAlAncer

WALL-MOUNTED TYPE

REMOTE TYPE




Other OptiOnAl system




GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

fire stAtiOn

WOrkshOp

proJect cases




ceNtral VacUUm system

introductionCentral Vacuum systems are used to remove dust from working place and vehicles, sanding and grinding, and these products are available in a range of configurations including swing arm, hanging type control terminal, stationary control terminal, automatic air throttle etc., so they could be customized according the number of work bays and clients requirements.

FeaturesEfficiency: No running around to connect hoses and cables to different outlets and connectorsSafety: No hoses or cables on the floor = less risk of personal injuries less wear and damages on hoses and cablesErgonomics: The tools are ergonomically and conveniently within reach on the holders and kept off the floorCleanliness: Easy access to vacuum for cleaning and on-tool extraction helps to keep the workplace clean and tidy at all times. Less wear on vehicles and premisesEnergy saving: Automatic vacuum valves close the vacuum supply when vacuum not is used



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

ceNtral VacUUm systemSystem 1

System 2

System 3




Functional Module Model/ref. Description Unit System 1 System 2 System 3 System 4 System 5

Central Vacuum Machine

PW0501A 1.5KW/1 Terminal set

PW0501B 2.2KW/2 Terminals set 1 1

PW0501C 3.0KW/3 Terminals set 1 1 1

PW0502A 4.0KW/4-5 Terminals set

PW0502B 5.5KW/5-6 Terminals set

PW0502C 7.5KW/7-8Terminals set

PW0502D 11KW/9-10 Terminals set

Control Terminal (PowerBox) PW0500-11 Hanging Type set 2 3

Control Terminal (PowerCabinet) PW0500-21 Standing Type set 3

Cantilever(Swing Arm)

PW0500-01 5m set 2

PW0500-02 6m set ●

PW0500-03 7m set ●

Reel with Tube PW0500-31 for sanding and grinding, 9m hose set 2

Automatic Throttle/air valve PW0500-41 automatic control air flow pcs ● ● ● 2 ●

Air Tube

PW0500-51 for sanding and grinding, 6m hose pcs 4 6 6

PW0500-52 for sanding and grinding, 5m hose pcs ● ● ●

PW0500-53 for hand plane, 6m pcs ● ● ●

PW0500-54 for workplace cleaning, 9m hose pcs ● ● ● 4

Air Tube Socket PW0500-61 wall-mounted 4

wires and plugs - series 1 1 1 1 1

Air power Pipe - for air tools series 1 1 1

PVC Pipe with connector - including 3-ways connector and elbows series 1 1 1 1 1

Signal wire - series 1 1 1 1 1

ceNtral VacUUm system

System 5

System 4

●: stands for optional moduleNumber: quantityBlank: no



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

Design according to the EU standard, high proficiency and compact structure, applying in many industries to keep the working place clean.High efficient turbo-fan producing stable air flow of large volume; Vacuum dust collecting bucket can be easily separated into two parts by pneumatic device, and could be changed easily just by dragging it out without any assistance of tools; convenient to clear the dust.Cyclone separator inside enhances the evacuation resultImported filter materials; PTFE film of the filter improve the filtration precision;Steel body with powder painting, acid and alkali-resistant;Automatic pulse back blow dedusting system to keep filter bucket clean; Dust collecting box below makes it very convenient to remove the collected dust;Could be placed in anyplace because of it low noise and compact structureKeep running around the clock.Automatic/Manual control by control terminal or hose socket

Electrical outlet protection design

Cyclone filtration system

Humanized design cleanup

Automatic filter cleaning

Professional fan long life

PW0501A

PW0501B

PW0501C

Model PW0501A PW0501B PW0501C

Power 1500W 2200W 3000WVoltage 380V/220V 380V 380V

Current 4.1A/9A 5.6A 7.2A

Frequency 50Hz 50Hz 50Hz

Air Flow 210m3/h 270m3/h 318m3/h

Negative Pressure -190mbar -200mbar -200mbar

Dimension 500×500×1570mm 500×500×1570mm 500×500×1570mm

Weight 92kg 95kg 97.5kg

Noise 60dBA 60dBA 60dBAVolume 23L 23L 23LInsulation Level IP54 IP54 IP54

centrAl vAcuum

PW0502APW0502BPW0502CPW0502D

centrAl vAcuum

IntroductionCentral Vacuum working with other terminals has a variety of functions that can improve the working conditions and reduce Environmental pollution. This system provides "negative pressure" useful in various needs, for example extracting the fume produced during welding and dusts during grinding, polishing and cutting, collecting the fragments in the production line, and cleaning the floor of working place.

Automatic pulse blowback dedusting systemModel PW0502A PW0502B PW0502C PW0502D

Power 4000W 5500W 7500W 11000W

Voltage 380V 380V 380V 380V

Current 9.5A 12.9A 16.7A 28AFrequencyZ 50Hz 50Hz 50Hz 50HzAir Flow 530m3/H 700m3/H 900m3/H 900m3/h

Negative Pressure -200mbar -200mbar -200mbar -280mbar

Dimension 1220*780*1500mm 1220*780*1500mm 1220*780*1500mm 1220*780*1500mmWeight 280kg 300kg 322kg 375kg

Noise 72dBA 72dBA 72dBA 72dBAVolume 70L 70L 70L 70LInsulation Level IP54 IP54 IP54 IP54

FeaturesDesign according to the EU standard, high proficiency and compact structure, applying in many industries to keep the working place clean;High efficient turbo-fan producing stable air flow of large volume; the power of fan controlled by frequency-converter which makes the power increasing automatically according to working needs;Motor phase sequence and over-heat protection devices;Vacuum dust collecting bucket can be easily separated into two parts by pneumatic device, and could be changed easily just by dragging it out without any assistance of tools; convenient to clear the dust;Other functional dust collecting buckets are optional;Cyclone separator inside enhances the evacuation result;Imported filter materials; PTFE film of the filter improve the filtration precision;Inlet position on the machine could be designed according to needs;Steel body with powder painting, acid and alkali-resistant;Automatic pulse blowback dedusting system to keep filter bucket clean; Dust collecting box below makes it very convenient to remove the collected dust;Could be placed in an isolated room to cut down the noise level around working place;Keep running around the clock;Inspect the operation situation of dust collecting bucket through control panel;Automatic/Manual control by control terminal or hose socket

ceNtral VacUUm maiN UNit




Articulated Dust Extraction Arms are an effective solution to serve workstations inside car body shops where repairs of cars, motorbikes, lorries, coaches, buses, railway carriages, etc. are carried out. They are suspended between work bays within easy reach of technicians to ensure that working areas are kept clear of trailing leads and hoses. They are ideal when it is necessary to provide services to multiple preparation zones over a wide area.Could be equipped with service controls terminal for extracting dry sanding dusts, electrical hand tool connections and compressed air connections;An integral compressed air hose comes as standard with the arm, enabling the user to conveniently connect an air-powered tool. Alternatively, the arm can be fitted with a cable for electric tools. For optimum efficiency, the use of an automatic vacuum valve is strongly recommended.Available in 5, 6 or 7 meter versions, with top or bottom cable connection points;Equipped with two swivel points and corrosion-resistant constructed in Aluminum alloy ;

FunCTionAL MoDuLES

cOntrOl terminAls

stAtiOn cOntrOl terminAls

PW0500-11

PW0500-12

PW0500-21

PW0500-22

- Through the electric control linkage dust collection host. - Take power socket, filter oil mist device - Can be connected two dust collection tube for two people to use. - Air Tools or Electric Tools(optional).

Features

Features

Specifications

Specifications

- Hanging or wall mounted multifunction service unit for extracting dry sanding dust and supplying electrical energy and compressed air

- Available in dual (TSC)extraction coupling versions. - Complete with electrical sockets and quick compressed air

coupling that can be set up depending on working requirements - Air Tools or Electric Tools(optional).

Item Unit PW0500-11 PW0500-12External Socket(230V/16A) series 2 2Oil Air Interface series 2 2Dir Air Interface series / 1Air Filter pcs 2 2Pressure regulation valve+gauge pcs 1 1Hose Interface pcs 2 2Remote Control / Yes YesAir Valve / automatic manual

Item Unit PW0500-21 PW0500-22External Socket(230V/16A) series 2 2

Oil Air Interface series 2 2Dir Air Interface series / 1Air Filter pcs 2 2Pressure regulation valve+gauge pcs 1 1

Hose Interface pcs 2 2Remote Control / Yes YesAir Valve / manual Dual automatic

PW0500-01

PW0500-02

PW0500-03

5M

6M

7M

US$1767.59

US$2430.44

US$2872.34

sWing Arm(ArticulAted dust extrActiOn Arms/ cAntilever)



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

sWing Arm(ArticulAted dust extrActiOn Arms/ cAntilever)

Model AΦ(mm) B(mm) C(mm) D(mm) E(mm) F(mm) L(mm) H(mm) OΦ(mm) RΦ(mm) UΦ(mm) KgPW0500-31 500 612 160 280 290 31 496 220 40 300 50 22

vAcuum hOse reel

AutOmAtic Air vAlve

mAnuAl Air vAlvevAcuum hOse set (cleAning)

PW0500-31

PW0500-31

PW0500-41

PW0500-32

PW0500-32

PW0500-41

PW0500-42PW0500-43

- It could be mounted on the wall or ceiling - Equipment with 9m air hose - Automatic air valve optional - Spring drive to keep the work bay clean and tidy

- Enables high vacuum systems to maximize efficiency.

- A major role in the main branch of the pipeline system to close the valve.

- Equipped with a micro-switch for vacuum equipment start-stop function.

Apply to the control of the cleaning system, the start-stop of the host.

Length:9M Inner Dia:32mm ,Covering the whole station

FunCTionAL MoDuLES




CL0810

This equipment is specially designed for the garage& industrial working place to collecting dust.1.Apply to removing the dust from any kind of dust filters for recycling use2.This system includes the dust blowing room, dust bucket, tornado blower, and automatic controller.Size: 600X530X1260mmDust blowing room size: 550X360X500mm Power: 1000WAir pressure: 50PSI

dUst blowiNg machiNe



GAS AND

POWER S

UPPLY E

QUIPME

NT EXHA

USTING

GAS EX

TRACTIO

N SYSTE

M

proJect cases




Air power&emission extraction for auto/car/motor-SYLVAN

Documents

Transcript of Air power&emission extraction for auto/car/motor-SYLVAN