Numerical Modeling of Turbulent Diffusion Flame Using Finite-Rate Chemistry Model
& ολογία [email protected]) · PDF...
Transcript of & ολογία [email protected]) · PDF...
Ευρωπαϊκό Κέντρο Επιχειρηματικής Στήριξης Κύπρου, ΚΕΒΕ, Λεωφ. Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066, Τ.Θ. 21455, 1509, Λευκωσία, Κύπρος, Τηλ. +357 22889800, Φαξ. 22661044
1
21/02/2011
ΠΡΟΣ: Όλους του ενδιαφερόμενους ΑΠΟ: Στάλω Δημοσθένους ΘΕΜΑ: Προσχέδια Προτύπων σε Δημόσια Κρίση
Κυρία/ε,
Επισυνάπτονται προσχέδια ευρωπαϊκών προτύπων που αφορούν τους πιο κάτω τομείς, τα οποία τίθενται σε δημόσια κρίση:
- Κατασκευαστικά Έργα & Πολιτικοί μηχανικοί - Ηλεκτρικά, Ηλεκτρονικά Είδη & Ιατρικός Εξοπλισμός - Έργα εφαρμοσμένης μηχανικής - ΑΕΡΙΟ - Βιομηχανικές Εφαρμογές - Τρόφιμα & Βιοτεχνολογία - Θέρμανση, Ψύξη & Εξαερισμός - Χημικά & Περιβάλλον - Υγεία - Μεταφορές & Συσκευασία
Εάν οποιοδήποτε από τα προσχέδια θεωρείτε ότι επηρεάζει την επιχείρησή σας και κατ’ επέκταση την Κυπριακή οικονομία, τότε παρακαλώ επικοινωνήστε μαζί μας (τηλ. 22889752/48, e-mail: [email protected]) για να σας εξασφαλισθεί το κείμενο του προσχεδίου.
Σχόλια για τα προσχέδια γίνονται δεκτά μόνο μέχρι την ημερομηνία που ορίζεται στον επισυναπτόμενο πίνακα.
Πάντοτε στη διάθεσή σας.
Με εκτίμηση,
Στάλω Δημοσθένους Κούλεντρου Λειτουργός Συντονίστρια Ενημέρωσης Ευρωπαϊκού Κέντρου Επιχειρηματικής Στήριξης Κύπρου Για Γενικό Γραμματέα
prEN 12467 Fibre-cement flat sheets - Product specification and test methods
14/02/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 492 Fibre-cement slates and fittings - Product specification and test methods
14/02/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 494 Fibre-cement profiled sheets and fittings - Product specification and test methods
14/02/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN ISO 10772Test method for the determination of the filtration behaviourof geotextiles under turbulent water flow conditions (ISO/DIS 10772:2010)
14/02/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN ISO 10776Geotextiles and geotextile-related products - Determinationof water permeability characteristics normal to the plane, under load (ISO/DIS 10776:2010)
14/02/2011CONSTRUCTION & CIVIL
ENGINEERING
EN 1996-1-1:2005/prA1Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
07/02/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 50132-5-2:2010Alarm systems - CCTV surveillance systems for use in security applications - Part 5-2: IP Video Transmission Protocols
25/02/2011CONSTRUCTION & CIVIL
ENGINEERING
FprEN 50377-14-1:2010Connector sets and interconnect components to be used inoptical fibre communication systems - Product specifications Part 14-1: Cords with IEC 60793-2-50 singlemode category
25/02/2011CONSTRUCTION & CIVIL
ENGINEERING
EN 60335-1:2002/FprAG:2010 Household and similar electrical appliances - Safety - Part 1: General requirements
25/02/2011CONSTRUCTION & CIVIL
ENGINEERING
FprEN 61869-2:2010Instrument transformers - Part 2: Current transformers
25/02/2011CONSTRUCTION & CIVIL
ENGINEERING
FprEN 62282-2:2010Fuel cell technologies - Part 2: Fuel cell modules
25/02/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 636Plywood - Specifications
28/02/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 15882-2 Extended application of results from fire resistance tests for service installations - Part 2: Dampers
21/02/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 12217Doors - Operating forces - Requirements and classification
03/04/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN ISO 12631 Thermal performance of curtain walling - Calculation of thermal transmittance (ISO/DIS 12631:2010)
03/04/2011CONSTRUCTION & CIVIL
ENGINEERING
EN 934-2:2009/prA1Admixtures for concrete, mortar and grout - Part 2: Concreteadmixtures - Definitions, requirements, conformity, marking and labelling
03/04/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 480-8Admixtures for concrete, mortar and grout - Test methods -Part 8: Determination of the conventional dry material content
03/04/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 325 Wood-based panels - Determination of dimensions of test pieces
03/04/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 16205Laboratory measurement of walking noise on floors
03/04/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 1366-11Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components
03/04/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 1366-12 Fire resistance tests for service installations - Part 12: Non-mechanical fire dampers
03/04/2011CONSTRUCTION & CIVIL
ENGINEERING
FprEN 12326-2Slate and stone for discontinuous roofing and externalcladding - Part 2: Methods of test for slate and carbonate slate
18/03/2011CONSTRUCTION & CIVIL
ENGINEERING
EN 480-13:2009/FprA1Admixtures for concrete, mortar and grout - Test methods -Part 13: Reference masonry mortar for testing mortar admixtures
11/03/2011CONSTRUCTION & CIVIL
ENGINEERING
EN 480-1:2006/FprA1 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
11/03/2011CONSTRUCTION & CIVIL
ENGINEERING
FprEN 675 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
11/03/2011CONSTRUCTION & CIVIL
ENGINEERING
FprEN 12326-2Slate and stone for discontinuous roofing and externalcladding - Part 2: Methods of test for slate and carbonate slate
18/03/2011CONSTRUCTION & CIVIL
ENGINEERING
FprEN 544 Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods
25/03/2011CONSTRUCTION & CIVIL
ENGINEERING
Ο Κυπριακός Οργανισμός Τυποποίησης (CYS) κοινοποιεί τους τίτλους των προσχεδίων των Ευρωπαϊκών προτύπων, τα οποία τίθενται σε ΔΗΜΟΣΙΑ ΚΡΙΣΗ(PUBLIC ENQUIRY). Οι ενδιαφερόμενοι μπορούν να προμηθευτούν τα κείμενα των προτύπων από τον Κυπριακό
Οργανισμό Τυποποίησης (ΚΕΝΤΡΟ ΠΛΗΡΟΦΟΡΗΣΗΣ ΚΑΙ ΕΞΥΠΗΡΕΤΗΣΗΣ (ΚΕΠΕ)
τηλ. 22-411413/4, φαξ. 22411433, email: [email protected]).
ΚΥΠΡΙΑΚΟΣ ΟΡΓΑΝΙΣΜΟΣ ΤΥΠΟΠΟΙΗΣΗΣΛεωφόρο Λεμεσού & Κώστα Αναξαγόρα 30,
3ος Όροφος, 2014 ΛευκωσίαΤ.Κ. 16197, 2086 Λευκωσία
Τηλ: +357 22 411411 Φαξ: +357 22 411511Ηλεκτρ. Ταχυδρ.: [email protected]
EN 1999-1-3:2007/FprA1 Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
25/03/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 232 revBaths - Connecting dimensions
09/04/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 251 revShower trays - Connecting dimensions
09/04/2011CONSTRUCTION & CIVIL
ENGINEERING
prEN 12428 Industrial, commercial and garage doors and gates - Thermatransmittance - Requirements for classification
16/04/2011CONSTRUCTION & CIVIL
ENGINEERING
FprEN 15432-1Winter and road service area maintenance equipments - Front-mounted equipments - Part 1: Fixed front mounting plates
02/04/2011CONSTRUCTION & CIVIL
ENGINEERING
FprEN 13050 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
09/04/2011CONSTRUCTION & CIVIL
ENGINEERING
FprEN 60099-5:2010 Surge arresters - Part 5: Selection and application recommendations
11/02/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 60191-6-12:2010 Mechanical standardization of semiconductor devices - Part
6-12: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design
11/02/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61850-7-410:2010 Communication networks and systems for power utility
automation - Part 7-410: Hydroelectric power plants - Communication for monitoring and contro
11/02/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61587-1:2010 Mechanical structures for electronic equipment - Tests for
IEC 60917 and IEC 60297 - Part 1: Environmental requirements and tests, safety aspects for cabinets, racks,
11/02/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 140401-804:2010 Detail Specification: Fixed low power film high stability SMD
resistors - Rectangular - Stability classes 0,1; 0,2501/03/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
FprEN 60974-1:2010 Arc welding equipment - Part 1: Welding power sources 01/03/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTEN 60335-2-6:2003/FprAC:2010Household and similar electrical appliances - Safety - Part 2-
6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
29/03/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61169-44:2010 Radio-frequency connectors - Part 44: Sectional
specification for series SMP push-on radio-frequency coaxial connectors
29/03/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61969-1:2010 Mechanical structures for electronic equipment - Outdoor
enclosures - Part 1: Design guidelines29/03/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
FprEN 61969-2:2010 Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions
29/03/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61969-3:2010 Mechanical structures for electronic equipment - Outdoor
enclosures - Part 3: Environmental requirements, tests and safety aspects
29/03/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61400-11:2010 Wind turbines - Part 11: Acoustic noise measurement
techniques29/03/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
FprEN 61969-1:2010 Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines
29/03/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61969-2:2010 Mechanical structures for electronic equipment - Outdoor
enclosures - Part 2: Coordination dimensions29/03/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
FprEN 61969-3:2010 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
29/03/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 60893-3-1:2010 Insulating materials - Industrial rigid laminated sheets based
on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial
06/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61212-3-1:2010 Insulating materials - Industrial rigid round laminated tubes
and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials -
06/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTEN 60927:2007/FprA1:2010 Auxiliaries for lamps - Starting devices (other than glow
starters) - Performance requirements06/04/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
FprEN 61674:2010 Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging
06/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 62561-1:2010 Lightning Protection System Components (LPSC) - Part 1:
Requirements for connection components06/04/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
FprEN 62561-2:2010 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes
06/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTEN 55016-1-4:2010/FprA1:2010
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for
06/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 60601-2-16:2008/FprA1:2010
Medical electrical equipment - Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration
06/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTprEN 50411-3-6:2010 Fibre organisers and closures to be used in optical fibre
communication systems - Product specifications - Part 3-6: Multimode mechanical fibre splice
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 62196-1:2010 Plugs, socket-outlets, vehicle connectors and vehicle inlets -
Conductive charging of electric vehicles - Part 1: General requirements
13/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61837-1:2010 Surface mounted piezoelectric devices for frequency control
and selection - Standard outlines and terminal lead connections - Part 1: Plastic moulded enclosure outlines
13/04/2012 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENT
FprEN 61754-26:2010 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces - Part 26: Type SF connectorfamlily
13/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTEN 55020:2007/FprAA:2010 Sound and television broadcast receivers and associated
equipment - Immunity characteristics - Limits and methods of measurement
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTEN 60947-2:2006/FprA2:2010 Low-voltage switchgear and controlgear - Part 2: Circuit-
breakers20/04/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
FprEN 62196-2:2010 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 60862-2:2010 Surface acoustic wave (SAW) filters of assessed quality -
Part 2: Guidance to the use20/04/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
FprEN 61970-456:2010 Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 60704-2-4:2010 Household and similar electrical appliances - Test code for
the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTEN 61755-3-6:2006/FprA1:2010
Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 60874-1:2010 Fibre optic interconnecting devices and passive components
Connectors for optical fibres and cables - Part 1: Generic specification
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 60874-1-1:2010 Fibre optic interconnecting devices and passive components
Connectors for optical fibres and cables - Part 1-1: Blank detail specification
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61274-1:2010 Fibre optic interconnecting devices and passive components
Adaptors for fibre optic connectors - Part 1: Generic specification
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61314-1:2010 Fibre optic interconnecting devices and passive components
Fibre optic fan-outs - Part 1: Generic specification20/04/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
FprEN 61314-1-1:2010 Fibre optic interconnecting devices and passive components Fibre optic fan-outs - Part 1-1: Blank detail specification
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61400-4:2010 Wind turbines - Part 4: Design requirements for wind turbine
gearboxes20/04/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
EN 55016-1-5:2004/FprA1:2010
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61274-1-1:2010 Fibre optic interconnecting devices and passive components
Adaptors for fibre optic connectors - Part 1-1: Blank detail specification
20/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 61341:2010 Method of measurement of centre beam intensity and beam
angle(s) of reflector lamps27/04/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
FprEN 62364:2010 Hydraulic machines - Guide for dealing with hydro-abrasive erosion in Kaplan, Francis and Pelton turbines
27/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTEN 60061-1:1993/FprA47:2010 Lamp caps and holders together with gauges for the control
of interchangeability and safety - Part 1: Lamp caps27/04/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
EN 60061-2:1993/FprA44:2010 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
27/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTEN 60061-3:1993/FprA45:2010 Lamp caps and holders together with gauges for the control
of interchangeability and safety - Part 3: Gauges27/04/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
FprEN 60384-14:2010 Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
27/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 62047-13:2010 Semiconductor devices - Microelectromechanical devices -
Part 13: Bend- and shear- type test methods of measuring adhesive strenght for MEMS structures
27/04/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENTFprEN 12464-1 Light and lighting - Lighting of work places - Part 1: Indoor
work places28/02/2011 ELECTRICAL,
ELECTRONIC & MEDICAL EQUIPMENT
prEN 16237 Classification of non-electrical sources of incoherent optical radiation
31/05/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENT
prEN 16231 Energy efficiency benchmarking methodology 31/05/2011 ELECTRICAL, ELECTRONIC &
MEDICAL EQUIPMENT
prEN 848-3 revSafety of woodworking machines - One side mouldingmachines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines
1/2/2011MECHANICAL ENGINEERING
FprEN 50122-1:2010/FprAA:201Railway applications - Fixed installations - Electrical safety,earthing and the return circuit - Part 1: Protective provisions against electric shock
18/02/2011MECHANICAL ENGINEERING
EN 50408:2008/FprAA:2010Household and similar electrical appliances - Safety - Particular requirements for cab heaters for vehicles 18/02/2011
MECHANICAL ENGINEERING
FprEN 61915-2:2010Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles forstarters and similar equipment
18/02/2011MECHANICAL ENGINEERING
FprEN 60440:2010 Method of measurement of non-linearity in resitors 18/02/2011MECHANICAL ENGINEERING
FprEN 62276:2010�Single Crystal Wafers for Surface Acoustic Wave (SAW) devices applications - Specification and measuring method 18/02/2011
MECHANICAL ENGINEERING
FprEN 62551:2010� Analysis techniques for dependability - Petri net techniques 18/02/2011MECHANICAL ENGINEERING
FprHD 60364-7-714:2010Low-voltage electrical installations - Part 7-714: Requirements for special installations or locations - External lighting installations
18/02/2011MECHANICAL ENGINEERING
FprHD 60364-7-715:2010�Low-voltage electrical installations - Part 7-715: Requirements for special installations or locations - Extra-lowvoltage lighting installations
18/02/2011MECHANICAL ENGINEERING
FprEN 62541-7:2010� OPC Unified Architecture - Part 7: Profiles 18/02/2011MECHANICAL ENGINEERING
FprEN 62541-9:2010� OPC Unified Architecture - Part 9: Alarms and Conditions 18/02/2011MECHANICAL ENGINEERING
FprEN 62541-10:2010�OPC Unified Architecture - Part 10: Programs
18/02/2011MECHANICAL ENGINEERING
prEN 12110 Tunnelling machines - Air locks - Safety requirements4/2/2011
MECHANICAL ENGINEERING
prEN 12111Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
4/2/2011MECHANICAL ENGINEERING
prEN 16191 Tunnelling machinery - Safety requirements4/2/2011
MECHANICAL ENGINEERING
prEN ISO 16834
Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels -Classification (ISO/DIS 16834:2010)
21/2/2011MECHANICAL ENGINEERING
prEN ISO 21952
<p>Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steels - Classification (ISO/DIS 21952:2010)</p>
21/2/2011MECHANICAL ENGINEERING
prEN ISO 24598
<p>Welding consumables - Solid wire electrodes, tubularcored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels -
21/2/2011MECHANICAL ENGINEERING
prEN ISO 14268Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO/DIS 14268:2010)
21/2/2011MECHANICAL ENGINEERING
prEN ISO 13085Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells (ISO/DIS 13085:2010)
1/2/2011MECHANICAL ENGINEERING
prEN ISO 27627Petroleum and natural gas industries - Aluminium alloy drill pipe thread connection gauging (ISO/DIS 27627:2010
1/2/2011MECHANICAL ENGINEERING
prEN ISO 10439-1
Petroleum, petrochemical and natural gas industries - Axialand centrifugal compressors and expander-compressors - Part 1: General requirements (ISO/DIS 10439-1:2010)
7/2/2011MECHANICAL ENGINEERING
prEN ISO 10439-2
Petroleum, petrochemical and natural gas industries - Axialand centrifugal compressors and expander-compressors - Part 2: Non-integrally geared centrifugal and axial
7/2/2011MECHANICAL ENGINEERING
prEN ISO 10439-3
Petroleum, petrochemical and natural gas industries - Axialand centrifugal compressors and expander-compressors - Part 3: Integrally geared centrifugal compressors (ISO/DIS
7/2/2011MECHANICAL ENGINEERING
prEN ISO 10439-4
Petroleum, petrochemical and natural gas industries - Axialand centrifugal compressors and expander-compressors - Part 4: Expander-compressors (ISO/DIS 10439-4:2010)
7/2/2011MECHANICAL ENGINEERING
EN ISO 15792-1:2008/prA1
Welding consumables - Test methods - Part 1: Test methodsfor all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000/DAM 1:2010)
7/2/2011MECHANICAL ENGINEERING
prEN 14906 Leather - Leather for automotive - Test methods7/2/2011
MECHANICAL ENGINEERING
prEN 10255Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
14/2/2011MECHANICAL ENGINEERING
prEN ISO 6433Technical product documentation - Part references (ISO/DIS 6433:2010)
14/2/2011MECHANICAL ENGINEERING
EN 1092-1:2007/prA1
Flanges and their joints - Circular flanges for pipes, valves,fittings and accessories, PN designated - Part 1: Steel flanges
4/3/2011MECHANICAL ENGINEERING
prEN ISO 13588
Non-destructive testing of welds - Ultrasonic testing - Use of(semi-) automated phased array technology (ISO/DIS 13588:2010)
4/3/2011MECHANICAL ENGINEERING
prEN ISO 17636-1
Non-destructive testing of welds - Radiographic testing - Part1: X- and gamma-ray techniques with film (ISO/DIS 17636-1:2010)
4/3/2011MECHANICAL ENGINEERING
prEN ISO 17636-2
Non-destructive testing of welds - Radiographic testing - Part2: X- and gamma-ray techniques with digital detectors (ISO/DIS 17636-2:2010)
4/3/2011MECHANICAL ENGINEERING
prEN ISO 16119-1
Agricultural and forestry machinery - Sprayers and liquidfertilizer distributors - Environmental protection - Part 1: General (ISO/DIS 16119-1:2010)
4/3/2011MECHANICAL ENGINEERING
prEN ISO 16119-2
Agricultural and forestry machinery - Sprayers and liquidfertilizer distributors - Environmental protection - Part 2: Horizontal-boom and similar sprayers (ISO/DIS 16119-
4/3/2011MECHANICAL ENGINEERING
prEN ISO 16119-3
Agricultural and forestry machinery - Sprayers and liquidfertilizer distributors - Environmental protection - Part 3: Sprayers for bush, tree and similar crops (ISO/DIS 16119
4/3/2011MECHANICAL ENGINEERING
prEN ISO 13628-8
Petroleum and natural gas industries - Design and operationof subsea production systems - Part 8: Remotely operated tools and interfaces on subsea production systems (ISO/DIS
11/3/2011MECHANICAL ENGINEERING
prEN ISO 13710
Petroleum, petrochemical and natural gas industries -Reciprocating positive displacement pumps (ISO/DIS 13710:2010)
11/3/2011MECHANICAL ENGINEERING
prEN ISO 15614-13
Specification and qualification of welding procedures formetallic materials - Welding procedure test - Part 13: Resistance butt (upset) and flash welding (ISO/DIS 15614
11/3/2011MECHANICAL ENGINEERING
EN 12649:2008/FprA1 Concrete compactors and smoothing machines - Safety28/3/2011
MECHANICAL ENGINEERING
FprEN 1889-1Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
11/4/2011MECHANICAL ENGINEERING
prEN 16203Safety of Industrial Trucks - Verification of Dynamic Stability -Counterbalanced Trucks
7/3/2011MECHANICAL ENGINEERING
prEN ISO 2739Sintered metal bushings - Determination of radial crushing strength (ISO/DIS 2739:2010)
7/3/2011MECHANICAL ENGINEERING
prEN 1870-7 rev
Safety of woodworking machines - Circular sawing machines- Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
7/3/2011MECHANICAL ENGINEERING
prEN 1870-8 rev
Safety of woodworking machines - Circular sawing machines- Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or
7/3/2011MECHANICAL ENGINEERING
prEN 1870-15 rev
Safety of woodworking machines - Circular sawing machines- Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or
4/4/2011MECHANICAL ENGINEERING
prEN 1870-16 revSafety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
4/4/2011MECHANICAL ENGINEERING
prEN 1870-17 rev
Safety of woodworking machines - Circular sawing machines- Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws
4/4/2011MECHANICAL ENGINEERING
prEN 1870-9 rev
Safety of woodworking machines - Circular sawing machines- Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or
4/4/2011MECHANICAL ENGINEERING
EN 474-1:2006+A1:2009/prA2Earth-moving machinery - Safety - Part 1: General requirements
4/4/2011MECHANICAL ENGINEERING
prEN ISO 11641<p>Leather - Tests for colour fastness - Colour fastness to perspiration (ISO/DIS 11641:2010)</p>
25/3/2011MECHANICAL ENGINEERING
EN 13445-2:2009/prA1 Unfired pressure vessels - Part 2: Materials25/3/2011
MECHANICAL ENGINEERING
EN 13445-2:2009/prA2 Unfired pressure vessels - Part 2: Materials25/3/2011
MECHANICAL ENGINEERING
prEN ISO 11640Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO/DIS 11640:2010)
25/3/2011MECHANICAL ENGINEERING
prEN ISO 11642Leather - Tests for colour fastness - Colour fastness to water (ISO/DIS 11642:2010)
25/3/2011MECHANICAL ENGINEERING
prEN 13418Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
9/4/2011MECHANICAL ENGINEERING
prEN 13336Leather - Upholstery leather characteristics - Guide for selection of leather for furniture
9/4/2011MECHANICAL ENGINEERING
prEN 16223Leather - Guideline on the designation and description of leather in upholstery and automotive interior applications
9/4/2011MECHANICAL ENGINEERING
ECISS/TC 110Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO/DIS 3183:2010)
16/4/2011MECHANICAL ENGINEERING
prEN ISO 17653
Resistance welding - Destructive tests on welds in metallicmaterials - Torsion test of resistance spot welds (ISO/DIS 17653:2011)
6/5/2011MECHANICAL ENGINEERING
prEN ISO 25197Small craft - Electrical/electronic control system for steering, shift and throttle (ISO/DIS 25197:2011)
20/5/2011MECHANICAL ENGINEERING
prEN ISO 27509Petroleum and natural gas industries - Compact flanged connections with IX seal ring (ISO/DIS 27509:2011
13/5/2011MECHANICAL ENGINEERING
EN ISO 5172:2006/prA1
Gas welding equipment - Blowpipes for gas welding, heatingand cutting - Specifications and tests (ISO 5172:2006/DAM 1:2011)
13/5/2011MECHANICAL ENGINEERING
prEN 14597 revTemperature control devices and temperature limiters for heat generating systems
13/5/2011MECHANICAL ENGINEERING
prEN 16230-1Leisure karts - Part 1: Safety requirements and test methods for karts
13/5/2011MECHANICAL ENGINEERING
prEN ISO 16180Small craft - Navigation lights - Installation and placement (ISO/DIS 16180:2011)
13/5/2011MECHANICAL ENGINEERING
prEN ISO 6927Buildings and civil engineering works - Sealants - Vocabulary (ISO/DIS 6927:2011)
13/5/2011MECHANICAL ENGINEERING
EN ISO 23125:2010/prA1Machine tools - Safety - Turning machines - Amendment 1 (ISO 23125:2010/DAM 1:2011)
2/5/2011MECHANICAL ENGINEERING
prEN 13203-4Gas fired domestic appliances producing hot water - Part 4:assessment of energy consumption of gas fired appliances combined heat and power (micro CHP) producing hot water
21/2/2011 GAS
EN ISO 7225:2007/prA1Gas cylinders - Precautionary labels (ISO 7225:2005/DAM 1:2010) 4/3/2011 GAS
prEN 12007-1Gas infrastructure - Pipelines for maximum operatingpressure up to and including 16 bar - Part 1: General functional recommendations
18/3/2011 GAS
prEN 12007-2Gas infrastructure - Pipelines for maximum operatingpressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to
18/3/2011 GAS
prEN 12007-4Gas infrastructure - Pipelines for maximum operatingpressure up to and including 16 bar - Part 4: Specific functional recommendations for renovation
18/3/2011 GAS
prEN 12327Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements 18/3/2011 GAS
prEN ISO 14246Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO/DIS 14246:2010) 25/3/2011 GAS
prEN ISO 13076 Paints and varnishes - Lightning and procedure for visual assessments (ISO/DIS 13076:2010)
20/2/2011 INDUSTRIAL APPLICATIONS
prEN ISO 9117-6 Paints and varnishes - Drying tests - Part 6: Print-free test (ISO/DIS 9117-6:2010)
20/2/2011 INDUSTRIAL APPLICATIONS
prEN ISO 6330 Textiles - Domestic washing and drying procedures for textiletesting (ISO/DIS 6330:2010)
20/2/2011 INDUSTRIAL APPLICATIONS
prEN ISO 4920 Textiles - Determination of resistance to surface wetting (spray test) (ISO/DIS 4920:2010)
20/2/2011 INDUSTRIAL APPLICATIONS
prEN 1976Copper and copper alloys - Cast unwrought copper products
20/3/2011 INDUSTRIAL APPLICATIONS
prEN ISO 13129
Paints and varnishes Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) or DC transient (DCT) measurements (ISO/DIS 13129:2010)
20/4/2011 INDUSTRIAL APPLICATIONS
prEN 12496 Galvanic anodes for cathodic protection in seawater and saline mud
21/4/2011 INDUSTRIAL APPLICATIONS
prEN 16222Cathodic protection of ships
22/4/2011 INDUSTRIAL APPLICATIONS
prEN ISO 13174 Cathodic protection of harbour installations (ISO/DIS 13174:2010)
23/4/2011 INDUSTRIAL APPLICATIONS
prEN ISO 4892-2 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO/DIS 4892-2:2011)
24/4/2011 INDUSTRIAL APPLICATIONS
prEN 16162 Animal feeding stuffs - Determination of Decoquinate by HPLC with fluorescence detection
14/02/2011FOOD &
BIOTECHNOLOGY
prEN ISO 29461-1Air intake filter systems for rotary machinery - Test methods -Part 1: Static filter elements (ISO/DIS 29461-1:2010)
01/02/2011HEATING COOLING &
VENTILATION
prEN 13142Ventilation for buildings - Components/products forresidential ventilation - Required and optional performance characteristics
04/02/2011HEATING COOLING &
VENTILATION
EN 13053:2006/FprA1Ventilation for buildings - Air handling units - Rating and performance for units, components and sections
21/3/2011HEATING COOLING &
VENTILATION
FprEN 1264-1Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols
21/3/2011HEATING COOLING &
VENTILATION
prEN ISO 14644-1Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO/DIS 14644-1:2010)
04/11/2011HEATING COOLING &
VENTILATION
prEN ISO 14644-2Cleanrooms and associated controlled environments - Part 2: Specifications for monitoring and periodic testing to prove continued compliance with ISO 14644-1 (ISO/DIS 14644
04/11/2011HEATING COOLING &
VENTILATION
prEN 12599 revVentilation for buildings - Test procedures and measurementmethods to hand over air conditioning and ventilation systems
04/11/2011HEATING COOLING &
VENTILATION
prEN 16211Ventilation for buildings - Measurement of air flows on site - methods
04/11/2011HEATING COOLING &
VENTILATION
prEN 442-1 revRadiators and convectors - Part 1: Technical specifications and requirements
04/11/2011HEATING COOLING &
VENTILATION
prEN 442-2 Radiators and convectors - Part 2: Test methods and rating 04/11/2011HEATING COOLING &
VENTILATION
prEN 442-3 rev Radiators and convectors - Part 3: Evaluation of conformity 04/11/2011HEATING COOLING &
VENTILATION
prEN ISO 10121-2Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 2: Gas phase air cleaning devices (GPACD) (ISO/DIS 10121
06/05/2011HEATING COOLING &
VENTILATION
EN 267:2009/FprA1 Automatic forced draught burners for liquid fuels 03/06/2011HEATING COOLING &
VENTILATION
prEN 16163Conservation of cultural property - Exhibition lighting of cultural property
7/2/2011 GENERAL
prEN 13850Postal Services - Quality of Services - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail
22/4/2011 GENERAL
prEN 13508-1 rev Investigation and assessment of drain and sewer systems outside buildings - Part 1: General Requirements
20/2/2011 CHEMICALS AND ENVIRONMENT
prEN 16161Water quality - Guidance on the use of in vivo absorptiontechniques for the estimation of chlorophyll-a concentration inmarine and fresh water samples
20/2/2011 CHEMICALS AND ENVIRONMENT
prEN 16192Characterization of waste - Analysis of eluates
20/2/2011 CHEMICALS AND ENVIRONMENT
prEN 16181Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid
20/2/2011 CHEMICALS AND ENVIRONMENT
prEN ISO 12846Water quality - Determination of mercury - Method usingatomic absorption spectrometry (AAS) with and without enrichment (ISO/DIS 12846:2010)
20/3/2011 CHEMICALS AND ENVIRONMENT
prEN ISO 6341Water quality - Determination of the inhibition of the mobilityof Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO/DIS 6341:2010)
20/3/2011 CHEMICALS AND ENVIRONMENT
prEN 890 Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate, liquid
20/3/2011 CHEMICALS AND ENVIRONMENT
prEN 15933Sludge, treated biowaste and soil - Determination of pH
20/02/2011 CHEMICALS AND ENVIRONMENT
prEN 15934 Sludge, treated biowaste, soil and waste - Calculation of dry matter by determination of dry residue or water conten
20/02/2011 CHEMICALS AND ENVIRONMENT
prEN 15935 Sludge, treated biowaste, soil and waste - Determination of loss on ignition
20/02/2011 CHEMICALS AND ENVIRONMENT
prEN 15936 Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion
20/02/2011 CHEMICALS AND ENVIRONMENT
prEN 15937 Sludge, treated biowaste and soil - Determination of specific electrical conductivity
20/02/2011 CHEMICALS AND ENVIRONMENT
prEN ISO 12782-1Soil quality - Parameters for geochemical modelling ofleaching and specification of constituents in soils and soil materials - Part 1: Extraction of amorphous iron oxides and
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN ISO 12782-2Soil quality - Parameters for geochemical modelling ofleaching and specification of constituents in soils and materials - Part 2: Extraction of crystalline iron oxides and
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN ISO 12782-3Soil quality - Parameters for geochemical modelling ofleaching and specification of constituents in soils and materials - Part 3: Extraction of aluminium oxides and
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN ISO 12782-4Soil quality - Parameters for geochemical modelling ofleaching and specification of constituents in soils and materials - Part 4: Extraction of humic substances from solid
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN ISO 12782-5Soil quality - Parameters for geochemical modelling ofleaching and specification of constituents in soils and materials - Part 5: Extraction of humic substances from
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16166 Sludge, treated biowaste and soil - Determination of adsorbable organically bound halogens (AOX
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16167Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16168 Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16169 Sludge, treated biowaste and soil - Determination of Kjeldahl nitrogen
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16170Sludge, treated biowaste and soil - Determination of traceelements by inductively coupled plasma optical emission spectrometry (ICP-OES)
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16171Sludge, treated biowaste and soil - Determination of traceelements using inductively coupled plasma mass spectrometry (ICP-MS)
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16172Sludge, treated biowaste and soil - Determination of traceelements in aqua regia and nitric acid digests - Graphite furnace atomic absorption spectrometry method (GFAAS)
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16173 Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16174 Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16175-1Sludge, treated biowaste and soil - Determination of mercuryin aqua regia and nitric acid digests - Part 1: Cold vapour atomic absorption spectrometry (CVAAS)
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16175-2Sludge, treated biowaste and soil - Determination of mercuryin aqua regia and nitric acid digests - Part 2: Cold vapour atomic fluorescence spectrometry (CVAFS)
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16179 Sludge, treated biowaste and soil - Guidance for sample pretreatment
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 13752 rev Products used for treatment of water intended for human consumption - Manganese dioxide
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 14654-2 Management and control of cleaning operations in drains andsewers - Part 2: Rehabilitation
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN ISO 5667-3 Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO/DIS 5667-3:2010)
20/4/2011 CHEMICALS AND ENVIRONMENT
prEN 16214-1Sustainably produced biomass for energy applications -Principles, criteria, indicators and verifiers for biofuels and bioliquids - Part 1: Terminology
20/4/2011 SOLID, LIQUID & AIR FUELS
prEN 16214-2Sustainably produced biomass for energy applications -Principles, criteria, indicators and verifiers for biofuels and bioliquids - Part 2: Conformity assessment including chain of
20/4/2011 SOLID, LIQUID & AIR FUELS
prEN 16214-3Sustainably produced biomass for energy applications -Principles, criteria, indicators and verifiers for biofuels and bioliquids - Part 3: Biodiversity and environmental aspects
20/4/2011 SOLID, LIQUID & AIR FUELS
prEN ISO 3826-1Plastics collapsible containers for human blood and bloodcomponents - Part 1: Conventional containers (ISO/DIS 38261:2010)
14/02/2011HEALTHCARE
prEN 13940-2 Health informatics - System of concepts to support continuity of care - Part 2: Health care process and workflow
14/02/2011HEALTHCARE
prEN ISO 5361 Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO/DIS 5361:2010)
14/02/2011HEALTHCARE
prEN ISO 11608-2Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO/DIS 11608-2:2010)
14/02/2011HEALTHCARE
prEN ISO 11608-5Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO/DIS 11608-5:2010)
14/02/2011HEALTHCARE
EN 14535-1:2005/FprA1Railway applications - Brake discs for railway rolling stock -Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
11/02/2011TRANSPORT &
PACKAGING
EN 15220-1:2008/FprA1Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators
11/02/2011TRANSPORT &
PACKAGING
EN 15595:2009/FprA1 Railway applications - Braking - Wheel slide protection 11/02/2011TRANSPORT &
PACKAGING
FprEN 12561-1 revRailway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods
11/04/2011TRANSPORT &
PACKAGING
FprEN 12561-2 revRailway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return
11/04/2011TRANSPORT &
PACKAGING
FprEN 12561-3 revRailway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
11/04/2011TRANSPORT &
PACKAGING
FprEN 12561-4 revRailway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products
11/04/2011TRANSPORT &
PACKAGING
FprEN 12561-5 revRailway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products
11/04/2011TRANSPORT &
PACKAGING
FprEN 12561-6 rev Railway applications - Tank wagons - Part 6: Manholes 11/04/2011TRANSPORT &
PACKAGING
FprEN 12561-7 revRailway applications - Tank wagons - Part 7: Platforms and ladders
11/04/2011TRANSPORT &
PACKAGING
FprEN 12561-8 rev Railway applications - Tank wagons - Part 8: Heating connections
11/04/2011TRANSPORT &
PACKAGING
prEN ISO 16495 Packaging - Transport packaging for dangerous goods - Test methods (ISO/DIS 16495:2010)
14/03/2011TRANSPORT &
PACKAGING
prEN 16207Railway applications - Braking - Functional and performancecriteria of Electromagnetic Track Brake systems for use in railway rolling stock
14/03/2011TRANSPORT &
PACKAGING
prEN 16210Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipmen
04/04/2011TRANSPORT &
PACKAGING
prEN 1645-1 rev Leisure accommodation vehicles - Caravans - Part 1: Habitation requirements relating to health and safety
04/04/2011TRANSPORT &
PACKAGING
prEN 1646-1 rev Leisure accommodation vehicles - Motor caravans - Part 1: Habitation requirements relating to health and safety
04/04/2011TRANSPORT &
PACKAGING
prEN ISO 13274Packaging - Transport packaging for dangerous goods -Plastics compatibility testing for packaging and IBCs (ISO/DIS 13274:2011)
29/04/2011TRANSPORT &
PACKAGING
prEN 1647Leisure accommodation vehicles - Caravan holiday homes -
Habitation requirements relating to health and safety06/05/2011
TRANSPORT & PACKAGING
prEN 15877-2Rail applications - Markings on railway vehicles - Part 2:External markings on coaches, motives power units, locomotives and on track machines
06/05/2011TRANSPORT &
PACKAGING
prEN 16235Railway applications - Testing for the acceptance of runningcharacteristics of railway vehicles - Freight wagons - Conditions for dispensation of freight wagons with defined
06/05/2011TRANSPORT &
PACKAGING
prEN ISO 18541-1Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition (ISO/DIS 18541-1:2011)
06/05/2011TRANSPORT &
PACKAGING