VIGIPROD®A devoted customer service team is at your disposal for any consultancy and installation...
Transcript of VIGIPROD®A devoted customer service team is at your disposal for any consultancy and installation...
VIGIPROD®
www.vigitechnics.com VIG_TC_VigiProd_brochure_EN_160525
NO-CONTACT MEASURING SYSTEM
Absolute accuracy (-/+ 0,5μm)
User-friendly (color touch screen)
Up to 20 pieces/second inspection speed
System suited to the production environment
VIGIPROD® is a non-contact dimensional control system specifically designed for use in harsh environment. It consists of one controller and one or several measuring optical sensors. Measurements are performed by infrared optical sensors (shadowgraphy method). A transmitter delivers a beam of light which is partially obscured by the part being controlled while a receiver measures the beam obscuring ratio/ The control unit automatically calculates the position of the part in the optical field.
No-contact measuring system
MAIN FEATURES
POWER SUPPLY 24V DC.
INFRARED SENSORS Transceiver.
COMPONENTS INSPECTION Instant or continuous measurement On fixed or moving components.
NUMBER OF AVAILABLE PROGRAMS Up to 128 test/inspection programs.
DATA STORAGE USB stick.
COMMUNICATION Ethernet and RS422 (MODBUS TCP).
Digital I/O for process control and/or interface with PLC/HMI
ERGONOMICS 4.3 "Graphic Color Touch Screen.
PLC/HMI can be transferred to PC.
OPTIMISATION OF PRODUCTION Measurement of the machining quality (dimensions, surface finishes, tools wear).
DETECTION AND CORRECTION Automatic detection and correction of process drifts : tool wear, lighting variations, soiling...
MANAGEMENT
Fully automated system (temporary halt of production in case the rate of scrap is too high).
Sorting and rejection based on acceptance criteria.
Statistics and quality indicators (measurements, averages scrap rate...).
PERFORMANCES Up to 8 different measurements per component.
MEASURING RANGE 0.5 to 2 mm for a single sensor (every dimension can be monitored by using 2 sensors).
INSPECTION SPEED Up to 20 component per second.
ACCURACY ± 0.5 μm with 0.1 μm repeatability (depending on sensor type).
ENVIRONMENT / STANDARDS EN 61326-1 (EN 55011, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-6).
SENSOR PROTECTION RATING IP54.
SENSOR SELF-CALIBRATION Freed from environmental conditions (lighting variations, soiling on the optics, drift of sensors...).
INTERACTION Production auxiliary system: Visual alarm, production line shutdown...
© Vigitechnics - creation Vigitechnics - Photos Vigitechnics & Fotolia
Transmitter: E100, E200 Receiver: Type R and S
Control unit Examples of controlled components
The information provided in this document is non-contractual. It is subject to change without notice. The document is available into French language upon request.
Accuracy - High output - Repeatability
VIGITECHNICS - ZI les landes 49 240 Avrillé France - Tel : +33 (0)2 41 34 35 11 - Email : [email protected]
Outer/Inner diameter Presence/Absence Thickness/width
Height/Height difference Warpage/Flatness Distance/Gap
Position Ovalisation/Eccentricity Profile
RECEIVER REFERENCES MEASURING RANGE (mm)
R2510 2.5
R2502 0.2
R1025 1
R0515 0.5
R0207 0.2
S4020 4
S1030 1
S2040 2
Accessories for specific applications are available upon request. A devoted customer service team is at your disposal for any consultancy and installation at your facility.
VIGIPROD® can be programmed to instantly control static or moving components, as well as continuously measure static or moving components. It can also perform specific measurements. TYPE OF MEASURES:
Applications
VIGIPROD 2 is the successor of VIGIPROD 1 that had worked to the full satisfaction of the industry all over the world. The control unit of the VIGIPROD 2 is compatible with the sensors of the VIGIPROD 1. Our team will assist to install VIGIPROD.
Diameter & Length Boom control Throat-diameter Ovalisation, warp & eccentricity
Measure of chamfers on moving parts
Fitting orientation for seals
Gauge diameter Orientation of segments Thread control Screws control
Quality of thread Tapping detection Indirect control of height on moving parts
Strip width Gap width
Origin
Integrated within QC-Developpement group, VIGITECHNICS, QUASAR CONCEPT and INCATRONIC combine their specialist exper-tise and operate in various sectors such as automative, aeronautics, defense, energy, electronics, Pharma and healthcare at international level. They group together all the businesses necessary for a complete personalised service.
They trust us CGG GROUPE, VALEO, JTEKT/HPI, PSA, INTEVA, ACS, BOSCH, TI AUTOMOTIVE FUEL SYSTEMS, CLAAS TRACTOR, MAGNETI MARELLI, MICHELIN, SNCF, FAIVELEY, MOTOROLA, ROCKWELL, SAFRAN, THALES AVIONICS, THALES MICROELECTRONIQUE, ZODIAC, AERAZUR, PRECILEC, SICMA AERO SEAT, CROUZET, DGA, NEXTER, CELM, DCNS, THALES UNDERWATER SYSTEMS, ENAG, IFREMER, THALES COMMUNICATION, DELTA DORE, INSTITUT PASTEUR, SKF, OTIS, THYSSENKRUPP, BA SYSTEMES, PSA, PCM POMPES, SALMSON, ARDAGH, LABORATOIRE CEN-TRAL DES PONTS ET CHAUSSEES, SAUNIER DUVAL, SCHNEIDER ELECTRIC, SOCOMEC, SORHODEL, CROUZET, APC MGE, MERLIN GERIN, VEOLIA ENVIRONNEMENT just to name a few.
VIGITECHNICS - ZI les landes 49 240 Avrillé France - Tel : +33 (0)2 41 34 35 11 - Email : [email protected]