To Customer P/N UDE P/N RV1-ZZ-0021 Description RJ45 1X1 … · 2017-07-06 · UDE...
Transcript of To Customer P/N UDE P/N RV1-ZZ-0021 Description RJ45 1X1 … · 2017-07-06 · UDE...
UDE P/N: RV1-ZZ-0021
Customer P/N:
To:
LED:L-Yellow; R-Green
Revision
CheckedApproved Prepared
AUpdate Date2016/10/12
Spec No.RV116043-00
Description:
Contact Area : 6μ" min. Gold
RJ45 1X1 VerticalThrough Hole10/100 Base-T
Spec No. : RV116043-00 RV1-ZZ-00211. MECHANICAL DIMENSION
1.1 Product Dimension
www.ude-corp.com
General Tolerance : X.X :X.XX :
± 0.38± 0.20Unit:mm
- 1 -
Spec No. : RV116043-00 RV1-ZZ-00211.2 Recommended PCB Layout
Component Side of Board
All dimension tolerances are ±0.05mm unless otherwise specified
www.ude-corp.com- 2 -
Spec No. : RV116043-00 RV1-ZZ-00211.3
1.4 Packing Information
50 pcs finished goods per tray
7 trays(350 pcs finished goods) per inner box
4 Inner boxes(1400 pcs finished goods) per master carton
www.ude-corp.com
Recommended Panel cutout
- 3 -
Spec No. : RV116043-00 RV1-ZZ-00211.5
- All dimensions follow :
FCC subpart F, 68,500, Figure (C)(2)(i) & (C)(2)(ii) & (C)(3)(i)
IEC 60603-7
- All plugs must be meeting the requirements of plug Go & No-Go gauge.
Gauge follow : FCC subpart F, 68,500, Figure (C)(4)(i) & (C)(5)(i)
- There must be no damage to Housing and Locking Latch.
- There must be no nicks and cuts in cable.
- Durability : 750 cycles generally
www.ude-corp.com
Standard RJ45 Plug Specification
- 4 -
Spec No. : RV116043-00 RV1-ZZ-00212. REQUIREMENTS
2.1 Design and Construction
2.2 Material
2.2.1 Terminal Parts ( Underplating : 50μ" min. Nickel overall )
2.2.1.1 RJ Terminal : Phosphor Bronze , Thickness=0.30mm
Finish : Contact Area : 6μ" min. Gold
2.2.1.2 Input Terminal : Brass, Thickness=0.35mm
Finish : 100μ" min. Bright Tin
2.2.1.3 Case Terminal : Brass, Thickness=0.30mm
Finish : 100μ" min. Bright Tin
2.2.2 Plastic Parts <UL94V-0>
2.2.2.1 Housing : PBT, Black
2.2.2.2 Case : PA6T, Black
2.2.2.3 Spacer : PA6T, Black
2.2.3 Shield Parts : Stainless Steel, Thickness=0.20mm, Pre-soldering
www.ude-corp.com
Product shall be of design, construction and physical dimensions specifiedon applicable.
- 5 -
Spec No. : RV116043-00 RV1-ZZ-00212.3 Operating and Storage Temperature
2.4 RJ45 specifications
2.5 Performance and Test Description
2.6 Packaging and Packing
www.ude-corp.com
Insulation Resistance :
Storage Temperature :
Operating Temperature :
-40°C to +85°C
- 6 -
Insertion force with the latch depressed :
Product is designed to meet electrical, mechanical and environmentalperformance requirements specified in below table. All tests are performedat ambient environmental conditions per MIL-STD-1344A and EIA-364unless otherwise specified.
All parts shall be packaged and packed to protect against physicaldamage、corrosion and deterioration during shipment and storage.
500MΩ min.
Locking Force of Plug Latch :
22N max
44N maxRemoval force with the latch depressed :
Durability : 2500 cycles
50N min. @ 60+/-5 sec
0°C to +70°C
Spec No. : RV116043-00 RV1-ZZ-00213. ELECTRICAL CHARACTERISTICS @ 25℃
3.1 Schematic
www.ude-corp.com
588570 1.7 ~2.6 V 10μA max.
Emitting Color λp (nm) Vf @If=20mA Ir @Vr=5V
1.7 ~2.6 VGreen
Yellow 10μA max.
- 7 -
Yellow
L3
L4
L1
L2
Green
PHY Side(INPUT)
TD+ R1
TD- R3
TCT R2
RCT R5
RD+ R4
RD- R6
GND R8
Cable Side(RJ45 OUTPUT)
C1 TX+
C2 TX-
C4
C5
C3 RX+
C6 RX-
C7
C8
1 : 1
2KV 1000pF
1 : 1
Shield
75Ω 75Ω
75Ω75Ω
NC R7
Spec No. : RV116043-00 RV1-ZZ-00213.2 Transmitter filter & Receiver filter
Type : Balance low pass 100Ω impedance
Insertion loss :
Return loss :
3.3 Common Mode Rejection
@ 1~100 MHz -30dB min.
3.4 Cross Talk
@ 1~100 MHz -30dB min.
3.5 Inductance @ 100KHz, 0.1V, 8mA DC BIAS
Input(R1-R3), Input(R4-R6) : 350 μH min.
3.6 HiPot Test
Input(R1-R3) To 1500Vac 60s or 2250Vdc 60s
Input(R4-R6) To 1500Vac 60s or 2250Vdc 60s
www.ude-corp.com
load 100Ω
30~60MHz -16dB min. load 100Ω
60~80MHz -12dB min.
Output(C3-C6) :
1~100 MHz
- 8 -
Output(C1-C2) :
load 100Ω
-1.0dB max.
1~30 MHz -18dB min.
Spec No. : RV116043-00 RV1-ZZ-00214. DIPPING TEMPERATURE PROFILE
www.ude-corp.com- 9 -
Spec No. : RV116043-00 RV1-ZZ-00215. Revision History
www.ude-corp.com- 10 -
2016/10/12 A Initial Release . Max
Issue Date Revision Comments Operator