ST Optical Jumper Cord(Simplex) Optical Jumpeآ  Permissible deviation in dimensions without...

download ST Optical Jumper Cord(Simplex) Optical Jumpeآ  Permissible deviation in dimensions without tolerance

of 9

  • date post

    01-May-2020
  • Category

    Documents

  • view

    1
  • download

    0

Embed Size (px)

Transcript of ST Optical Jumper Cord(Simplex) Optical Jumpeآ  Permissible deviation in dimensions without...

  • w w

    w .f

    a sc

    o .c

    o m

    .m x

    Paseo de la Reforma No. 295 Piso Mezzanine Colonia Cuauhtémoc Delegación Cuauhtémoc Ciudad de México, México CP. 06500

    (55) 5533 8246 contacto@fasco.com.mx

    ST Optical Jumper Cord(Simplex)

    (Cord diameter : φ0.9mm Type)

    TECHNICAL SPECIFICATIONS

    p. 1

  • w w

    w .f

    a sc

    o .c

    o m

    .m x

    Paseo de la Reforma No. 295 Piso Mezzanine Colonia Cuauhtémoc Delegación Cuauhtémoc Ciudad de México, México CP. 06500

    (55) 5533 8246 contacto@fasco.com.mx

    1. PROVISION

    1.1 Application Limit

    These specifications apply to the ST optical jumper cord.

    2. ORDER INFORMATION

    Order information of the ST optical jumper cord in Table 1

    Table 1 Information of Order

    p. 2

  • w w

    w .f

    a sc

    o .c

    o m

    .m x

    Paseo de la Reforma No. 295 Piso Mezzanine Colonia Cuauhtémoc Delegación Cuauhtémoc Ciudad de México, México CP. 06500

    (55) 5533 8246 contacto@fasco.com.mx

    3. GENERAL SPECIFICATIONS

    3.1 Parts and Materials

    Parts and the materials of ST connector are shown in Table 2

    Table 2 Parts and Materials of ST Jumper cord

    Cord Φ 0.9mm

    1*5

    1~99

    1*

    1*

    Q’ty

    MT-RJ Housing Set

    MT-Ferrule

    Parts Name

    9

    8

    7

    No.

    1*4

    1*3

    1*

    Ceramic Ferrule

    ST Housing Set

    SC Housing Set

    FC Housing Set

    LC Housing Set

    MU Housing Set6

    2/1*2

    21

    Q’tyParts NameNo.

    * In case of hybrid type jumper cords

    3.2 Physical Dimensions

    Figure 1 shows end face of ferrule Figure 2 geometry structure of ST end Figure 3 insertion Loss and Measurement system Figure 4 return Loss and Measurement system Figure 5 shows the assembled state of ST Optical jumper cord(ST/PC-ST/PC). Figure 7 shows the assembled state of ST Optical jumper cord(ST/PC-SC/PC). Figure 9 shows the assembled state of ST Optical jumper cord(ST/PC-ST/PC).

    Figure 10 shows the assembled state of ST Optical jumper cord(ST/PC-LC/PC). Figure 12 shows the assembled state of ST Optical jumper cord(ST/PC-MU/PC).

    3.3 General Tolerances

    Permissible deviation in dimensions without tolerance indication is in accordance with JIS

    B 0405 class m, as shown in Table3.

    p. 3

  • w w

    w .f

    a sc

    o .c

    o m

    .m x

    Paseo de la Reforma No. 295 Piso Mezzanine Colonia Cuauhtémoc Delegación Cuauhtémoc Ciudad de México, México CP. 06500

    (55) 5533 8246 contacto@fasco.com.mx

    Table 3 General Tolerance (JIS B 0405 class m)

    ±0 .312030

    ±0 .2306

    ±0 .163

    ±0 130.5

    Basic size step (mm)

    Over Under Permissible deviation (mm)

    4. OPTICAL PERFORMANCE

    Multi Mode

    20dB,Typical 30dB

    45dB, Typical 48dB

    UPC : > 55dB, Typical 58dB

    Characteristics

    Insertion Loss

    Return Loss

    Single Mode

    Table 4 Optical performance of ST end

    5. END FACE INSPECTION

    Check the polishing with a microscope or magnifier(X800)

    Large Pits or Internal chips Deep scratches

    Small Pits

    Core

    Figure 1 End face inspection

    p. 4

  • w w

    w .f

    a sc

    o .c

    o m

    .m x

    Paseo de la Reforma No. 295 Piso Mezzanine Colonia Cuauhtémoc Delegación Cuauhtémoc Ciudad de México, México CP. 06500

    (55) 5533 8246 contacto@fasco.com.mx

    7. INSERTION AND RETURN LOSS MEASUREMENT SYSTEM The test

    samples are measured in the following system

    The insertion loss(I.R) is defined as Insertion Loss = -10 P0

    Measuring instruments : RX3000 JDS Backreflection and Loss test set

    P1

    Master Adaptor Master Plug

    Light source

    Optical Power Meter

    Measured Plug

    P0

    P1

    Photo Detector

    Figure 3 Insertion Loss and Measurement system

    Backreflection Meter

    Measurement hybrid jumper

    Backreflection Meter

    Termination point for BR

    Termination point for BR0

    Measurement hybrid jumper

    Figure 4 Return Loss and Measurement system

    p. 5

  • w w

    w .f

    a sc

    o .c

    o m

    .m x

    Paseo de la Reforma No. 295 Piso Mezzanine Colonia Cuauhtémoc Delegación Cuauhtémoc Ciudad de México, México CP. 06500

    (55) 5533 8246 contacto@fasco.com.mx

    8.

    Table 5 Reliability characteristics of ST end

    Item

    Impact Test

    Cable Retention

    Durability

    Vibration

    Twist Test

    Flex Test

    Temperature Life

    Humidity

    Low Temperature

    Temperature Cycling

    Condition(GR-326)

    1.5 m × 8drops

    0.25Kg, 90゜

    200 times

    0~55Hz/min x 2hours

    0.9Kg x(X:1.5,Y:3)

    0.9Kgf x 100 times

    85℃ × 14days

    75℃ , 95%RH ×14days

    -10℃ × 4days

    -40 ~ 75 ℃ 8hours/cy cle 42cycles

    Typical properties

    Insertion Loss ≦ 0.2

    Δi ≦ 0.2

    Δi ≦ 0.2

    Δi ≦ 0.2

    Δi ≦ 0.2

    Δi ≦ 0.2

    Δi ≦ 0.2

    Δi ≦ 0.2

    Δi ≦ 0.2

    Δi ≦ 0.2

    λ=1300 nm Δi : Deviation (dB)

    9. SHIPPING INSPECTION

    Insertion loss, return loss for ST jumper cord are inspected before shipping and the

    inspection results are enclosed.

    10. PACKING

    The product is packed to prevent damage during shipment.

    RELIABILITY CHARACTERISTICS

    p. 6

  • w w

    w .f

    a sc

    o .c

    o m

    .m x

    Paseo de la Reforma No. 295 Piso Mezzanine Colonia Cuauhtémoc Delegación Cuauhtémoc Ciudad de México, México CP. 06500

    (55) 5533 8246 contacto@fasco.com.mx

    Figure 5 shows the assembled state of ST Optical jumper cord(ST/PC-ST/PC).

    Figure 6 shows the assembled state of ST Optical jumper cord(ST/PC-SC/PC).

    p. 7

  • w w

    w .f

    a sc

    o .c

    o m

    .m x

    Paseo de la Reforma No. 295 Piso Mezzanine Colonia Cuauhtémoc Delegación Cuauhtémoc Ciudad de México, México CP. 06500

    (55) 5533 8246 contacto@fasco.com.mx

    Figure T shows the assembled state of ST Optical jumper cord(ST/PC-FC/PC).

    Figure U shows the assembled state of ST Optical jumper cord(ST/PC-iC/PC).

    p. 8

  • w w

    w .f

    a sc

    o .c

    o m

    .m x

    Paseo de la Reforma No. 295 Piso Mezzanine Colonia Cuauhtémoc Delegación Cuauhtémoc Ciudad de México, México CP. 06500

    (55) 5533 8246 contacto@fasco.com.mx

    Figure V shows the assembled state of ST Optical jumper cord(ST/PC-jU/PC).

    p. 9