PUNCH MACHINE• 9 punching tools system • High quality output, long-lasting machine • Good...
Transcript of PUNCH MACHINE• 9 punching tools system • High quality output, long-lasting machine • Good...
1www.aluminco.com
PUNCH MACHINEMANUAL
Model Νο 2
2
FOR PUNCHING HOLES ON PROFILES, IN THE PRODUCTION OF ALUMINIUM FIXTURES
OPERATION INSTRUCTIONS
DEvICE COMPONENTS
Tools components available only as a set
13
6 7 2 5 12 8
4 11 14 3 15 9 1
10
Technical data
Code ΕΑ010.15PSU.01
Processing materials Aluminium profiles ( ALUMINCO system)
Working stroke 23mm
Dimensions (length x height x width) 480x380x180mm
Mass 37kg
ALUMINCO profile types for processing AL410, AL450, AL510, AL520, AL540
• 9 punching tools system• High quality output, long-lasting machine• Good punching mechanism, powered by gears and gear racks• Easy to close the press - lever operated punching, spring operated punch returning• Tool steel punches therm ally treated• Aluminium-base alloy upper plate and carriage, steel axle
An operator can transport, carry or mount the punch machine without assistance of another per-son. For safety reasons, it is recommended that two persons handle the device.Put the device on a strong and stable workbench size 155 x 400mm and secure it with four screws M10mm (in disposition 130 x 280mm). It is highly recommended that the stand is leveled before placing the device on it. The device is designed for indoor use. It is easy to operate it and opera-tors need no extensive training.
1 Punching tool EA010-15.01
2 Punching tool EA010-15.02
3 Punching tool EA010-15.03
4 Punching tool EA010-15.04
5 Punching tool EA010-15.05
6 Punching tool EA010-15.06
7 Punching tool EA010-15.07
8 Punching tool EA010-15.08
9 Punching tool EA010-15.09
10 Cover plate EA010-15.10
11 Base plate EA010-15.11
12 Guide EA010-15.12 (2τεμ)
13 Coupling EA010-15.13
14 Orizontal shaft EA010-15.14
15 Retro spring EA010-15.15
!
3www.aluminco.com
36
10,4 10,4
41
10 10
1. PUNCHING TOOL ΕΑ010-15.01
ΕΑ010-15.01
Stopper
Without stopper
With stopper
With stopper Without stopper
Profile:410-301450-301510-302, 303, 304, 305520-302, 303, 304, 305, 306, 308540-311
1. Bracket2. Punch3. Guide4. Matrix5. Ring6. Set of screws7. Stopper
6
6
7
3
4
5
1
6
2
4
2. Punching tool ΕΑ010-15.0246
,1
1617
,9
11,4
6
10,5
1
2
3
4
6
5
7
Profile:410- 102, 106, 108, 111, 112, 202, 204, 207, 209, 212,
225, 401450- 101, 102, 103. 104, 105, 201, 202, 203, 204, 903510- 101, 102, 103, 104, 105, 106, 107, 108, 109, 112,
113, 115, 116, 117, 121, 201, 202, 203, 204, 205, 207, 208, 209, 210, 211, 213, 215, 221, 401
520- 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 201, 202, 203, 204, 205, 206, 208, 209
540- 103, 113, 115, 202, 203, 206, 207, 212, 213, 214, 215
1. Bracket2. Punch3. Guide4. Matrix5. Ring6. Sheets Metals7. Set of Screws
5www.aluminco.com
3
32,5
6,35
3. PUNCHING TOOL ΕΑ010-15.03
or1
2
2 3
3
4
6
5
7
1. Bracket2. Punch 4,5mm3. Punch 3,0 mm4. Guide5. Matrix6. Ring7. Set of Screws
4,95
4,5
32,5
4,95
4,5
32,5
Profile:450- 201, 202520- 201, 202, 204, 209
Profile:450-101, 203, 204, 903510-205, 211520- 101, 109, 203, 205, 206, 208
6
4. PUNCHING TOOL ΕΑ010-15.04
28 4
3
4
1
2
5
1. Punch 2. Element for Undressing3. Set of Screws4. Bracket5. Holder
Profile:450- 103, 104, 105510- 102, 103, 104, 105, 115520- 102, 107, 111, 112
7www.aluminco.com
5. PUNCHING TOOL ΕΑ010-15.05
1. Punch 2. Guide3. Matrix (Left & Right)4. Ring5. Bracket6. Set of Screws
Profile:410-102, 106, 108450- 103, 104, 105510- 102, 103, 104, 105, 107, 115, 121520-102, 107, 110, 111, 121
28
4
5,8
6
5
1
2
3
4
8
6. PUNCHING TOOL ΕΑ010-15.06
1. Bracket2. Blade3. Punch (2pcs)4. Guide5. Matrix6. Ring7. Set of Screws
Prοfile:410- 102, 209, 212, 225450-201, 202, 203510-201, 202, 203, 204, 205, 208, 210, 211520-201, 202, 203, 204, 205, 208, 209540- 202, 203, 212, 213, 215
104
10,37
86
4,2
6
104
10,37
86
4,2
6
7
1
2
3
5
6
4
9www.aluminco.com
7. PUNCHING TOOL ΕΑ010-15.07
1. Punch 1 8mm2. Punch 1 6mm 3. Guide4. Matrix5. Rings6. Set of Screws7. Bracket
Prifile:410-905, 908
6
2 7
1
3
4
5
8
6 8
8
10
8. PUNCHING TOOL ΕΑ010-15.08
1. Blade2. Matrix3. Ring4. Blade Support5. Set of Screws
Prifil:410- 202, 204, 207, 212, 225450-201, 202, 203, 204510- 201, 202, 203, 204, 205, 207, 208, 209, 210,
211, 212, 215, 221520-201, 202, 203, 204, 205, 206, 208, 209540- 202, 203, 206, 207, 208, 212, 213, 214, 215
4
5
1
2
3
4,5
7,5
20
11www.aluminco.com
Profil:410- 111, 112, 301450-101, 102, 301, 903510-101, 106, 109, 113, 114, 117, 301, 302, 305520-101, 105, 106, 108, 109, 305, 308540-103, 113, 115, 311
9. PUNCHING TOOL ΕΑ010-15.09
1. Blade Support2. Blade 3. Matrix4. Matrix Support5. Ring5. Set of Screws
6
1
2
3
4
5
4
28
12
PUNCH MACHINEMANUAL
11/2014
Aluminium Building Systems Industry - 320 11 Inofita Viotia - Greece tel. +30 22620 47000 - fax +30 22620 47090 - [email protected], [email protected]