ER-6000AT-SW (IN-LINE)

PCB SEPARATOR CUT MACHINE

Technical Specification

01. PCB Working Area : (W) 330mm× (L) 420mm

02. X、Y、A、Cutting Speed：1 ~100mm/s

03. X、Y、A、Repeatability Accuracy：± 0.02mm

04. X、Y、A、Z、B、Control Method：Using Industrial IPC

05. X、Y、A、Z、B、Drive Mode：AC Servo Motor

06. Machine Operation and Data Saving：Using PC

07. Cutting Accuracy：± 0.1mm

08. Spindle Speed：MAX60000rpm

09. Machine Power Supply：220V 1ψ 50 / 60HZ

10. Air Supply：4.5kg/cm2 Above

11. Power Consumption：3KVA

12. Dust Collector Type：3HP Lower Dust Collector

13. Dust Collector Power Supply：220V (380V/415V) 3ψ

14. Machine Dimension：1550×1490×1670mm (W×D×H)

15. Dust Collector Dimension : 665 x 635 x 1700mm

Advantages

(i) Dust Collector unit uses high efficiency dust cleaner to improve dust collection efficiency.

(ii) Dust Collector sensor built-in for alarm notification when dust bag are full.

(iii) X, Y A-axis gantry structure are designed to improve cutting speed and accuracy.

(iv) Safety features are added to meet machine safety requirement.

Machine Option :

Hand Held Barcode with

ShopFloor Programming software

Auto Bit Changer Dedicated Jig / Fixture

5 HP Upgrade