colofer vision - voestalpine: technology group & capital ... · Properties Testing...
Transcript of colofer vision - voestalpine: technology group & capital ... · Properties Testing...
Colored on the outside, conductive on the inside.
colofer® vision is an innovative, organically coatedproduct that has been especially designed
for the consumer electronics industry. A conductive bottom-side coating protects devices from
electrostatic charge.
colofer® vision consists of a cover coating with a thickness of 15 μm. The bottom-side coating of
colofer® vision, with a thickness of 2–3 μm, contains a new type of pigments which are the reason
behind the products conductibility.
colofer® vision is available in a wide range of
different colors. Please address wishes concer-
ning your choice of color to your voestalpine
contact person.
The desired colofer® vision surface finish can
be applied upon request in accordance with
specific customer requirements.
colofer® visionData sheet • December 2011
Consumer electronics
Co
ns
um
er
ele
Ctr
on
iCs
ho
us
eh
old
ap
plia
nc
es
voestalpine Steel Division
www.voestalpine.com/stahl
All values reflect the current status of our experience and knowledge. Slight deviations may occur as a result of specific color and sheet thickness. Paper printouts cannot be updated on a regular basis. For this reason, please refer to the most recent version of the online data sheets found on our home page. Technical changes reserved, errors and misprints excepted. No part of this publication may be reprinted without explicit written permission by voestalpine Stahl GmbH.
2D
ata
sh
ee
t c
olo
fer®
vis
ion
• 1
2/2
01
1Properties: p Excellent punchability
p Good coating adhesiveness
p Best formability
p Temperature resistance
p Good corrosion resistance
Structure colofer® vision
1-layer system, approx. 15 μm
pCover coat, approx. 15 µm
p Substrate:
Electrolytically galvanized steel strip
p Bottom-side coating:
Bottom-side coating with a thickness of 2–3 μm, contains
a new type of pigments which are the reason behind the products conductibility.
Typical applications: Casings for
p flatscreens
p dvd-players
p etc.
Environment: As all colofer® products, colofer® vision is 100 %
chromate-free. voestalpine has been a leader in this
area for many years and already meets future emission
standards today.
We do not see environmental protection as a duty,
but an issue that we naturally want to address.
Properties Testing standard/Inspection requirement Typical values
Total layer thickness ISO 2808: 1991 roughly 15 μm
ColorISO 3668: 1976EN 13523-3:1999
upon agreement
Mirror finish EN 13523-2:1999 upon agreement +/- 5 EH
Adhesion after cuppingEN 13523-6:1999 ISO 2409: 1992
6 mm Gt0B
Adhesion after bending EN 13523-7:1999 0 T peel adhesion
Crack formation during bending EN 13523-7:1999 ≤ 1 T free of cracks
Corrosion resistance
p Condensation – constant atmosphere
EN 13523-25:1999 500 h no blistering
p Condensation – variable atmosphere
EN 13523-25:1999 500 h no blistering, no separation near punched holes
p Salt spray test ISO 7253:1984 72 h no blistering on surface,no separation near punched holes
bottom-side coating surface resistance
Franklin test ASTM A717 < 0.5 Ohm x cm²
voestalpine guarantees to comply with the following specifications, within the framework of the
statutory warranty conditions:
Product properties
3D
ata
sh
ee
t c
olo
fer®
vis
ion
• 1
2/2
01
1
voestalpine Steel Divisionvoestalpine-Straße 34020 Linz, AustriaT. +43/50304/15-8007F. +43/50304/[email protected]/stahl