CLIC_DDS_A
12
CLIC_DDS_A DRAWING DETAILS
description
CLIC_DDS_A. DRAWING DETAILS. Regular cell. g = L-t. t/2. e. a. Ellipticity : ε = e/(t/2). L. M c. M r. R c. Rounding = 1.0 mm All other roundings = 0.5 mm. X. Y. Dimensions (mm). {X, Y}. {12.6442, 1.072 }. Rounding on these edges = 0.5 mm. {6.8, 0.5}. - PowerPoint PPT Presentation
Transcript of CLIC_DDS_A
CLIC_DDS_ADRAWING DETAILS
e
L
a
g = L-tt/2
Ellipticity :ε = e/(t/2)
Regular cell
b
2b
2bemajor
emajor3.0eminor
Rc
Mc Mr
Rounding = 1.0 mmAll other roundings = 0.5 mm
{12.6442, 1.072 }
X
Y
{X, Y}
{6.8, 0.5}
Dimensions (mm)
Rounding on these edges = 0.5 mm
Rounded edge
No rounding on this edge
Full iris copper disc
Half iris vacuum model
ma1
a1 a2a3
mg1g1
g2
t1 t2t3
t1
MLL1 = 20mm ML1= mg1+t1 L1= g1+t2 L2 = g2+t3
MLDisc1MatchingDisc1 Disc1 Disc2
a = Iris radiusma = Matching iris radiusg = Gapmg = Matching gapt = Iris thicknessL= LengthMLL = Mode launcher lengthML = Matching length
Discs
Disc # 1 2
a(mm) 3.8523 3.7524
b*(mm) 11.0031 10.9199
t(mm) 3.8884 3.772
ε(mm) 1.0203 1.0465
g(mm) 4.3316 4.4432
* b’s correspond to 4micron shift structure
a24
t25
a25
t24
ma25
g23 g24 mg25t25
MLL25 = 20mm ML25= mg25L23= g23+t24
MLDisc25MatchingDisc25Disc23
L24= g24+t25
Disc24
Mesh : 5 micro S.A. + A.R.3
