Post on 19-Oct-2020
Q Stainless Steel
Q Feature: Stainless Steel Belts which have excellent flatness, heat resistance and conductivity. QFeature: Dedicated Crowned Type Pulleys & Idlers for Stainless Steel Belts.
Type mMaterialThickness
mmWeight kg/m2
Allowable Stress kg/cm
Min. Pulley Dia. Ømm
Continuous Use Temperature °C
Electrical Resistance of Surface Ω
Friction Coefficient (Ref. against Polished Steel)
h HardnessHV
Young's Modulus kgf/mm2
Thermal Expansion Coefficient x10-6/°C
STHBLT SUS304H0.1 0.8 4 50 -80~110 0.2
0.2 370 or More 19700 17.30.15 1.2 6 75 -80~120 0.30.2 1.6 8 100 -80~130 0.5
EBelt thickness tolerance to belt thickness is ±10%.
W ±0.1
T
Pulleys and Idlers for Stainless Steel BeltsStainless Steel Belts
Part Number Belt WidthW (mm)
1mm Increment
Belt Length L (m)0.01m Increment Body Price/m Welding Charge (Body Price +)Type
Belt ThicknessT (mm)
STHBLT0.10.150.2
10~20 0.50~10.00424
14,10521~30
0.80~10.00
15,47031~40 16,83541~50
469
18,20051~60 19,56561~70 20,93071~80 22,29581~90 23,660
91~100
510
24,948101~120 27,510121~140 30,067141~150 31,350
DBody Price Keyway Machining
Charge(Body Price +)
ROBASCL40 L50 L60 L70 L80 L90 L100 L110 L120 L130 L140 L150 L160
50 1,284 1,365 1,461 1,570 1,675 1,789 1,921 2,053 2,194 2,348 2,508 2,694 2,890 26060 1,497 1,607 1,729 1,857 1,998 2,144 2,307 2,494 2,699 3,003 3,140 3,427 3,741 26070 1,693 1,830 2,002 2,189 2,389 2,621 2,867 3,149 3,427 3,713 4,009 4,332 4,655 29275 1,902 2,034 2,221 2,398 2,612 2,853 3,135 3,436 3,736 4,041 4,355 4,746 5,151 29280 2,316 2,508 2,708 2,908 3,145 3,386 3,691 4,000 4,323 4,632 4,996 5,397 5,861 292
100 2,890 3,122 3,367 3,631 3,918 4,214 4,514 4,869 5,233 5,647 6,084 6,534 7,007 324
Part Number - Belt Width (mm) - Belt Length L (m)
Type Belt Thickness
STHBLT 0.15 - 25 - 2.24
QAccumulating Conveyance
QUltraviolet or Alcohol Sterilization
QConveyance of Liquid Crystal or Solar Panel
QImaging Test
• • • • • •Workpiece
Workpiece
WorkpieceWorkpiece Stopper
CameraInspection
Monitor
• • • • • •Workpiece
Workpiece
WorkpieceWorkpiece Stopper
CameraInspection
Monitor
• • • • • •Workpiece
Workpiece
WorkpieceWorkpiece Stopper
CameraInspection
Monitor
• • • • • •Workpiece
Workpiece
WorkpieceWorkpiece Stopper
CameraInspection
Monitor
EBelts of 0.1 and 0.15mm thickness are not suitable for accumulating conveyance.
10
Part Number dH7 10mm Increment K d1 D1 MType D Round Hole + Tap Keyway + Tap L Keyway Length Round Hole + Tap Keyway + Tap
ROBASC
5015 N15
40~160 30*
27 40 M5M4
20 N20 M525 N25 M6
6020 N20
32 45 M6M5
25 N25 M630 N30
7020 N20
35 50 M6M5
25 N25 M630 N30
7525 N25
40 55 M8 M630 N3035 N35 M8
8025 N25
41 55 M8 M630 N3035 N35 M8
10030 N30
45 60 M8M6
35 N35 M840 N40E * When L