Post on 11-Aug-2020
NJM8512/NJM8513
- 1 - Ver.04
Precision, JFET Input Operational Amplifier
■ FEATURES ●Low Input Offset Voltage VIO=400μV max. VIO=700μV max. (Ta= -40°C to +125°C) ●Low Input Offset Voltage Drift ΔVIO/ΔT=5μV/°C max. (Ta= -40°C to +125°C) ●Low Supply Current Icc=1.3mA /ch typ. ●High Slew Rate SR=20V/μs typ. ●Wide Bandwidth ft=7MHz typ. ●Low Noise en=10nV/Hz typ. (at f=1kHz ) ●Low Input Bias Current IB=80pA max. (at Ta=25°C) ●No Phase Reversal ●RF noise Immunity ●Guaranteed Temperature Topr= -40°C to +125°C ●Operating Voltage Vopr=±4.5V to ±16V ●Package
NJM8512 MSOP8 (VSP8) meet JEDEC MO-187-DA SOP8 JEDEC 150 mil NJM8513 SSOP14
■GENERAL DESCRIPTION The NJM8512/NJM8513 are Dual/Quad high
precision JFET input operational amplifier featuring low offset, low offset drift,low bias current, high slew rate, low noise and wide operating temperature range.
The precision performance, high speed and low noise make the NJM8512/NJM8513 especially suitable for filter and amplification of high speed and small signal in instruments, automated test equipment, sensors and other precision applications. ■APPLICATIONS ●Current Sensor ●Photodiode Amplification ●Reference Voltage Circuit ●Automatic Test Equipment
■ ELECTRICAL CHARACTERISTICS ■PIN CONFIGURATION
Pin Function
Package Outline
PART NUMBER
NJM8512AR NJM8512BR
NJM8512AE NJM8512BE
NJM8513AV NJM8513BV
-800
-600
-400
-200
0
200
400
600
800
-50 -25 0 25 50 75 100 125 150
Inpu
tOffs
etVo
ltage
[μV]
Temperature [ºC]
Input Offset Voltage vs. TemperatureV+/V-=±15V, VICM=0V, N=196
0
10
20
30
40
50
60
70
-5 -4 -3 -2 -1 0 1 2 3 4 5
Num
bero
fAm
plifi
ers
Input Offset Voltage Drift [μV/ºC]
Input Offset Voltage Drift DistributionV+/V-=±15V, Ta=-40ºC to 125ºC
N=196
SOP8 MSOP8 SSOP14
NJM8512/NJM8513
- 2 - Ver.04
■ ABSOLUTE MAXIMUM RATINGS (Ta=25ºC, unless otherwise noted.) PARAMETER SYMBOL RATING UNIT
Supply Voltage V+/V- ±18 V
Differential Input Voltage VID ±36 (Note1) V
Input Voltage VIN V-- 0.3 to V+ + 0.3(Note2) V
Input Current IIN ±10(Note3) mA
Power Dissipation
PD
(2-layer / 4-layer )
mW MSOP8 (VSP8) SOP8 SSOP14
595(Note4) / 805 (Note4) 690 (Note4) / 1000 (Note4) 490 (Note4) / 630 (Note4)
Output Short-Circuit Duration Infinete(Ta≦25℃) (Note4)
Operating Temperature Range Topr -40 to +125 ºC
Junction Temperature Tjmax +150 ºC
Storage Temperature Range Tstg -65 to +150 ºC (Note1) Differential Input Voltage is the voltage difference between +INPUT and -INPUT. (Note2) The normal operation will establish when any input is within the Common Mode Input Voltage Range of electrical characteristics. (Note3) If the input voltage exceeds the supply voltage,the input current must be limited 10 mA or less by using a restriction resistance. (Note4) 2-layer : EIA/JEDEC STANDARD Test board (76.2 x 114.3 x 1.6mm, 2layers, FR-4) mounting. 4-layer : EIA/JEDEC STANDARD Test board (76.2 x 114.3 x 1.6mm, 4layers, FR-4) mounting. See Figure “Fig.1-1 : Power Dissipation Curve” when ambient temperature is over 25°C. ■RECOMMENDED OPERATING VOLTAGE (Ta=25ºC)
PARAMETER SYMBOL RATING MIN. TYP. MAX. UNIT
Supply Voltage V+/V- ±4.5 - ±16 V
Figure1-A: Power Dissipation Derating Curve Figure1-B: Power Dissipation Derating Curve
NJM8512/NJM8513
- 3 - Ver.04
■ ELECTRICAL CHARACTERISTICS (V+/V-=±15V, Ta=25°C, VICM=0V, unless otherwise noted.) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Input Characteristics Input Offset Voltage NJM8512Bx / NJM8513Bx VIO1 - 80 400 µV
VIO2 Ta = -40ºC to 125ºC - - 700 µV NJM8512Ax / NJM8513Ax VIO1 - 80 800 µV
VIO2 Ta = -40ºC to 125ºC - - 1400 µV Input Offset Voltage Drift NJM8512Bx / NJM8513Bx ΔVio/ΔT Ta = -40ºC to 125ºC - 0.8 5 µV/ºC NJM8512Ax / NJM8513Ax ΔVio/ΔT Ta = -40ºC to 125ºC - 1 9 µV/ºC Input Bias Current IB1 - 25 80 pA
IB2 Ta = -40ºC to 125ºC - - 35 nA Input Offset Current IIO1 - 6 75 pA
IIO2 Ta = -40ºC to 125ºC - - 2 nA Common Mode Input Voltage Range VICM1 CMR ≧ 86dB -12.5 - +12.5 V
VICM2 CMR ≧ 80dB, Ta = -40ºC to 125ºC -12.5 - +12.5 V
Common Mode Rejection Ratio CMR1 VCM=-12.5V to +12.5V 86 108 - dB
CMR2 VCM=-12.5V to +12.5V, Ta = -40ºC to 125ºC 80 - - dB
CMR3 VCM=-10V to +10V 100 120 - dB Voltage Gain AV1 RL=2kΩ, VO=-13.5V to +13.5V 90 100 - dB
AV2 RL=2kΩ, VO=-13.5V to +13.5V, 82 - - dB Ta = -40ºC to 125ºC AV3 RL=10kΩ, VO=-13.5V to +13.5V 98 106 - dB
Input capacitance CIN - 10 - pF Channel Separation CS DC - 125 - dB
Output Characteristics Maximum Output Voltage VOH1 RL=10kΩ, Ta = -40ºC to 125ºC +14.0 +14.2 - V
VOL1 RL=10kΩ, Ta = -40ºC to 125ºC - -14.9 -14.6 V VOH2 RL=2kΩ, Ta = -40ºC to 125ºC +13.8 +14.1 - V VOL2 RL=2kΩ, Ta = -40ºC to 125ºC - -14.8 -14.4 V
VOH31 RL=600Ω +13.5 +13.9 - V VOH32 RL=600Ω, Ta = -40ºC to 125ºC +11.4 - - V VOL41 RL=600Ω - -14.3 -13.8 V VOL42 RL=600Ω, Ta = -40ºC to 125ºC - - -12.1 V
Supply Characteristics Supply Current (ALL Amps) : NJM8512 ICC1 GV=+1, RL=∞ - 2.6 3.0 mA
ICC2 GV=+1, RL=∞, Ta = -40ºC to 125ºC - - 3.3 mA Supply Current (ALL Amps) : NJM8513 ICC1 GV=+1, RL=∞ - 5.2 6.0 mA ICC2 GV=+1, RL=∞, Ta = -40ºC to 125ºC - - 6.6 mA Supply Voltage Rejection Ratio SVR1 V+/ V- = ±4.5V to ±16V 86 110 - dB
SVR2 V+/ V- = ±4.5V to ±16V,
80 - - dB Ta = -40ºC to 125ºC
Dynamic Performance Unity Gain Frequency fT GV=+100, RL=2kΩ, CL=10pF - 7 - MHz Slew Rate +SR RISE, GV=+1, VIN=2Vpp, RL=2kΩ - 20 - V/µs
-SR FALL, GV=+1, VIN=2Vpp, RL=2kΩ - 20 - V/µs Settling Time ts1 To 0.1%, 0V to 10V step, Gv=+1 - 0.7 - µs
ts2 To 0.01%, 0V to 10V step, Gv=+1 - 1.0 - µs Phase Margin ΦM - 70 - deg Total Harmonic Distortion THD fo=1kHz, GV=+1, RL=2kΩ - 0.0004 - %
Noise Performance Input Voltage Noise Density VNI fo=0.1Hz to 10Hz - 0.9 - µVpp
en1 fo=10Hz - 20 - nV/√Hz en2 fo=100Hz - 11 - nV/√Hz en3 fo=1kHz - 10 - nV/√Hz en4 fo=10kHz - 9 - nV/√Hz
(Note) Measurement is to be conducted in pulse testing.
NJM8512/NJM8513
- 4 - Ver.04
■ELECTRICAL CHARACTERISTICS (V+/V-=±5V, Ta=25°C, VICM=0V, unless otherwise noted.) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Input Characteristics Input Offset Voltage NJM8512Bx / NJM8513Bx VIO1 - 80 400 µV
VIO2 Ta = -40ºC to 125ºC - - 700 µV
NJM8512Ax / NJM8513Ax VIO1 - 80 800 µV
VIO2 Ta = -40ºC to 125ºC - - 1400 µV
Input Offset Voltage Drift NJM8512Bx / NJM8513Bx ΔVio/ΔT Ta = -40ºC to 125ºC - 0.8 5 µV/ºC
NJM8512Ax / NJM8513Ax ΔVio/ΔT Ta = -40ºC to 125ºC - 1 9 µV/ºC
Input Bias Current IB1 - 21 75 pA
IB2 Ta = -40ºC to 125ºC - - 31 nA
Input Offset Current IIO1 - 5 50 pA
IIO2 Ta = -40ºC to 125ºC - - 2 nA
Common Mode Input Voltage Range VICM1 CMR ≧ 86dB -2 - +2.5 V
VICM2 CMR ≧ 80dB, Ta = -40ºC to 125ºC -2 - +2.5 V
Common Mode Rejection Ratio CMR1 VCM=-2V to +2.5V 86 108 - dB
CMR2 VCM=-2V to +2.5V, Ta = -40ºC to 125ºC 80 - - dB
CMR3 VCM=-1V to +2V 92 113 - dB
Voltage Gain AV1 RL=2kΩ, VO=-3V to +3V 85 93 - dB
AV2 RL=2kΩ, VO=-3V to +3V,
80 - - dB Ta = -40ºC to 125ºC
AV3 RL=10kΩ, VO=-3V to +3V 90 100 - dB
Input capacitance CIN - 10 - pF
Channel Separation CS DC - 125 - dB Output Characteristics Maximum Output Voltage VOH1 RL=10kΩ, Ta = -40ºC to 125ºC +4.1 +4.3 - V
VOL1 RL=10kΩ, Ta = -40ºC to 125ºC - -4.9 -4.7 V
VOH2 RL=2kΩ, Ta = -40ºC to 125ºC +3.9 +4.2 - V
VOL2 RL=2kΩ, Ta = -40ºC to 125ºC - -4.9 -4.5 V
VOH31 RL=600Ω +3.7 +4.1 - V
VOH32 RL=600Ω, Ta = -40ºC to 125ºC +3.6 - - V
VOL41 RL=600Ω - -4.8 -4.3 V
VOL42 RL=600Ω, Ta = -40ºC to 125ºC - - -4.2 V Supply Characteristics Supply Current (ALL Amps) : NJM8512 ICC1 GV=+1, RL=∞ - 2.0 3.0 mA
ICC2 GV=+1, RL=∞, Ta = -40ºC to 125ºC - - 3.3 mA Supply Current (ALL Amps) : NJM8513 ICC1 GV=+1, RL=∞ - 4.0 6.0 mA ICC2 GV=+1, RL=∞, Ta = -40ºC to 125ºC - - 6.6 mA Dynamic Performance Unity Gain Frequency fT GV=+100, RL=2kΩ, CL=10pF - 7 - MHz
Slew Rate +SR RISE, GV=+1, VIN=2Vpp, RL=2kΩ - 18 - V/µs
-SR FALL, GV=+1, VIN=2Vpp, RL=2kΩ - 18 - V/µs
Settling Time ts1 To 0.1%, 0V to 4V step, Gv=+1 - 0.5 - µs
Phase Margin ΦM - 65 - deg
Total Harmonic Distortion THD fo=1kHz, GV=+1, RL=2kΩ - 0.0005 - % Noise Performance Input Voltage Noise Density VNI fo=0.1Hz to 10Hz - 0.9 - µVpp
en1 fo=10Hz - 20 - nV/√Hz
en2 fo=100Hz - 11 - nV/√Hz
en3 fo=1kHz - 10 - nV/√Hz
en4 fo=10kHz - 9 - nV/√Hz (Note) Measurement is to be conducted in pulse testing.
NJM8512/NJM8513
- 5 - Ver.04
■ ELECTRICAL CHARACTERISTICS
-800
-600
-400
-200
0
200
400
600
800
-50 -25 0 25 50 75 100 125 150
Inpu
tOffs
etVo
ltage
[μV]
Temperature [ºC]
Input Offset Voltage vs. TemperatureV+/V-=±15V, VICM=0V, N=196
-800
-600
-400
-200
0
200
400
600
800
-50 -25 0 25 50 75 100 125 150
Inpu
tOffs
etVo
ltage
[μV]
Temperature [ºC]
Input Offset Voltage vs. TemperatureV+/V-=±5V, VICM=0V, N=196
0
10
20
30
40
50
60
-400 -300 -200 -100 0 100 200 300 400
Num
bero
fAm
plifi
ers
Input Offset Voltage [μV]
Input Offset Voltage DistributionV+/V-=±15V, VICM=0V
N=196
0
10
20
30
40
50
60
-400 -300 -200 -100 0 100 200 300 400
Num
bero
fAm
plifi
ers
Input Offset Voltage [μV]
Input Offset Voltage DistributionV+/V-=±5V, VICM=0V
N=196
0
10
20
30
40
50
60
70
-5 -4 -3 -2 -1 0 1 2 3 4 5
Num
bero
fAm
plifi
ers
Input Offset Voltage Drift [μV/ºC]
Input Offset Voltage Drift DistributionV+/V-=±15V, Ta=-40ºC to 125ºC
N=196
0
10
20
30
40
50
60
70
-5 -4 -3 -2 -1 0 1 2 3 4 5
Num
bero
fAm
plifi
ers
Input Offset Voltage Drift [μV/ºC]
Input Offset Voltage Drift DistributionV+/V-=±5V, Ta=-40ºC to 125ºC
N=196
NJM8512/NJM8513
- 6 - Ver.04
Input Offset Voltage vs. Common-mode VoltageV+/V-=±15V, VICM=-12.5V to +12.5V
-800
-600
-400
-200
0
200
400
600
800
-15 -10 -5 0 5 10 15Input Common-mode Voltage [V]
Inpu
t Offs
et V
olta
ge [μ
V]
Ta=125°C
Ta=-40°CTa=25°C
Input Offset Voltage vs. Common-mode VoltageV+/V-=±5V, VICM=-2V to +2.5V
-800
-600
-400
-200
0
200
400
600
800
-5 -4 -3 -2 -1 0 1 2 3 4 5Input Common-mode Voltage [V]
Inpu
t Offs
et V
olta
ge [μ
V]
Ta=125°C
Ta=-40°CTa=25°C
Common-mode Rejection Ratio vs. Temperature
0
20
40
60
80
100
120
140
-50 -25 0 25 50 75 100 125 150Temperature [°C]
Com
mon
-mod
e R
ejec
tion
Rat
io [d
B]
V+/V-=±15V, VICM=-12.5V to +12.5V
V+/V-=±5V, VICM=-2V to +2.5V
CMR vs. FrequencyGv=60dB, Ta=25°C
-20
0
20
40
60
80
100
120
140
100 1k 10k 100k 1M 10MFrequency [Hz]
Com
mon
Mod
e R
ejec
tion
Rat
io [d
B]
V+/V-=±15V
V+/V-=±5V
Supply Voltage Rejection Ratio vs. TemperatureV+/V-=±4.5V to ±16V, VICM=0V
0
20
40
60
80
100
120
140
-50 -25 0 25 50 75 100 125 150Temperature [°C]
Supp
ly V
olta
ge R
ejec
tion
Rat
io [d
B]
Supply Voltage Rejection Ratio vs. FrequencyV+/V-=±15V, Gv=40dB, Ta=25ºC
-20
0
20
40
60
80
100
120
140
100 1k 10k 100k 1M 10MFrequency [Hz]
Supp
ly V
olta
ge R
ejec
tion
Rat
io [d
B]
+SVR
-SVR
NJM8512/NJM8513
- 7 - Ver.04
Gain/Phase vs. FrequencyV+/V-=±15V, RF=100kΩ, RG=1kΩ, RL=2kΩ, Ta=25ºC
-60
-40
-20
0
20
40
60
1k 10k 100k 1M 10M 100MFrequency [Hz]
Volta
ge G
ain
[dB
]
-180
-120
-60
0
60
120
180
Phas
e [d
eg]
CL=100pF
CL=1000pF
Gain
Phase CL=10pF
CL=1000pF
CL=10pF
CL=100pF
Gain/Phase vs. FrequencyV+/V-=±5V, RF=100kΩ, RG=1kΩ, RL=2kΩ, Ta=25ºC
-60
-40
-20
0
20
40
60
1k 10k 100k 1M 10M 100MFrequency [Hz]
Volta
ge G
ain
[dB
]
-180
-120
-60
0
60
120
180
Phas
e [d
eg]
CL=100pF
CL=1000pF
Gain
Phase CL=10pF
CL=1000pF
CL=10pF
CL=100pF
Open-loop Gain vs. TemperatureVICM=0V, RL=2kΩ
0
20
40
60
80
100
120
-50 -25 0 25 50 75 100 125 150Temperature [°C]
Ope
n-lo
op G
ain
[dB
]
V+/V-=±15V, VO=-13.5V to +13.5V
V+/V-=±5V, VO=-3V to +3V
Input Bias Current vs. TemperatureVICM=0V
1p
10p
100p
1n
10n
100n
-50 -25 0 25 50 75 100 125 150 Temperature [°C]
Inpu
t Bia
s C
urre
nt [A
]
V+/V-=±15V
V+/V-=±5V
Quiescent Current vs. Supply VoltageGv=0dB, VICM=0V
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0 2 4 6 8 10 12 14 16Supply Voltage V+/V-[V]
Qui
esce
nt C
urre
nt [m
A]
Ta=-40°C
Ta=25°C
Ta=125°C
Quiescent Current vs. TemperatureGV=0dB, VICM=0V
1.0
1.5
2.0
2.5
3.0
3.5
-50 -25 0 25 50 75 100 125 150Temperature [°C]
Qui
esce
nt C
urre
nt [m
A] V+/V-=±16V
V+/V-=±15V
V+/V-=±5V
V+/V-=±4.5V
NJM8512/NJM8513
- 8 - Ver.04
Maximum Output Voltage vs. Load ResistanceV+/V-=±15V, VIN+=1V/-1V, VIN-=0V
-15-12.5
-10-7.5
-5-2.5
02.5
57.510
12.515
100 1k 10k 100kLoad Resistance [Ω]
Max
imum
Out
put V
olta
ge [V
]
Ta=125°C
Ta=-40°C
Ta=25°C
Ta=125°C
Ta=25°C
Ta=-40°C
Maximum Output Voltage vs. Load ResistanceV+/V-=±5V, VIN+=1V/-1V, VIN-=0V
-5
-4
-3
-2
-1
0
1
2
3
4
5
100 1k 10k 100kLoad Resistance [Ω]
Max
imum
Out
put V
olta
ge [V
]
Ta=125°CTa=-40°CTa=25°C
Ta=125°C
Ta=25°C
Ta=-40°C
Maximum Output Voltage vs. TemperatureV+/V-=±15V, VIN+=1V/-1V, VIN-=0V
-15-12.5
-10-7.5
-5-2.5
02.5
57.510
12.515
-50 -25 0 25 50 75 100 125 150Temperature [ºC]
Max
imum
Out
put V
olta
ge [V
] RL=10kΩ RL=2kΩRL=600Ω
RL=10kΩRL=2kΩ RL=600Ω
Maximum Output Voltage vs. TemperatureV+/V-=±5V, VIN+=1V/-1V, VIN-=0V
-5
-4
-3
-2
-1
0
1
2
3
4
5
-50 -25 0 25 50 75 100 125 150Temperature [ºC]
Max
imum
Out
put V
olta
ge [V
] RL=10kΩRL=2kΩ
RL=600Ω
RL=10kΩRL=2kΩ RL=600Ω
-15
-10
-5
0
5
10
15
0 10 20 30 40 50 60 70 80
Max
imum
Out
put V
olta
ge[V
]
Output Current [mA]
Maximum Output Voltage vs. Output CurrentV+/V-=±15V, VIN+=1V/-1V, VIN-=0V
Ta=-40ºCTa=25ºC
Ta=125ºC
Ta=125ºC
Ta=-40ºC
Ta=25ºC
-5
-4
-3
-2
-1
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80
Max
imum
Out
put V
olta
ge[V
]
Output Current [mA]
Maximum Output Voltage vs. Output CurrentV+/V-=±5V, VIN+=1V/-1V, VIN-=0V
Ta=-40ºC
Ta=25ºC
Ta=25ºC
Ta=125ºC
Ta=125ºC
Ta=-40ºC
NJM8512/NJM8513
- 9 - Ver.04
Large Signal Step ResponseV+/V-=±15V, Gv=0dB, VIN=10Vpp, RL=2kΩ
1μsec/div
2V/d
iv
INPUT
OUTPUT
Small-Signal Step Response (Road Capacitance)V+/V-=±15V, Gv=0dB, VIN=1VPP, RL=2kΩ, Ta=25ºC
0.1μsec/div
0.2V
/div
100pF
10pF
1000pF
INPUT
OUTPUT 300pF
Small-Signal Step Response (Temperature)V+/V-=±15V, Gv=0dB, VIN=1VPP, RL=2kΩ, CL=10pF
0.1μsec/div
0.2V
/div
-40ºC
25ºC
125ºC
INPUT
OUTPUT
NJM8512/NJM8513
- 10 - Ver.04
Input Voltage Noise Density vs. FrequencyGv=40dB, RG=100Ω, RL=10kΩ, Ta=25°C
0
10
20
30
40
50
60
70
80
90
100
1 10 100 1k 10kFrequency [Hz]
Inpu
t Vol
tage
Noi
se D
ensi
ty [n
V/H
z]
V+/V-=±15V
V+/V-=±5V
1Hz to 100Hz Input Voltage NoiseV+/V-=±15V, 1 to 100Hz BPF
-2.0
-1.5
-1.0
-0.5
0.0
0.5
1.0
1.5
2.0
0 1 2 3 4 5 6 7 8 9 10time [sec]
Volta
ge [μ
V]
THD + Noise vs. Output Voltage V+/V-=±15V, AV=+1, RL=2kΩ, Ta=25ºC
0.0001
0.001
0.01
0.1
1
10
0.01 0.1 1 10 100Output Voltage [Vrms]
20Hzf=1kHz
THD + Noise vs. Output Voltage V+/V-=±5V, AV=+1, RL=2kΩ, Ta=25ºC
0.0001
0.001
0.01
0.1
1
10
0.01 0.1 1 10Output Voltage [Vrms]
20Hz
f = 1kHz
Tota
l Har
mon
ic D
isto
rtio
n +N
oise
[%]
NJM8512/NJM8513
- 11 - Ver.04
-8
-6
-4
-2
0
2
4
6
8
Volta
ge[V
]
Time [200μs/div]
Input Voltage vs. Output VoltageV+/V-=±5V, AV=0dB, RL=10kΩ
VIN
VOUT
-80
-60
-40
-20
0
20
40
60
80
0 20 40 60
Shor
t Circ
uit O
utpu
t Cur
rent
[mA]
Time [sec]
Short Circuit Output Current V+/V-=±15V, VIN+=0V, VO=0V, Ta=25ºC
VIN-=‐100ｍV
VIN-=+100ｍV
NJM8512/NJM8513
- 12 - Ver.04
■PACKAGE DIMENSIONS
0.6MAX
2.8±
0.2
0.127 -0.05
41
0～10ﾟ
0.55
±0.2
2.9 -0.1+0.3
4.0±
0.3
0.65
58
1.1±
0.1
0.1
-0.0
5
0.1
0.2±0.10.1 M
+0.1
+0.1
UNIT: mm
MSOP8(VSP8)
NJM8512/NJM8513
- 13 - Ver.04
■PACKAGE DIMENSIONS
5.0±0.3
1.27
-0.05+0.1
0.20
0.12 M0.4±0.1
0.15
±0.1
1.5±
0.15
0.8±
0.2
3.9±
0.2
6.0±
0.4
8 5
1 4
0.74MAX
0～10゜
0.1
SOP8 JEDEC 150 mil
UNIT:mm
NJM8512/NJM8513
- 14 - Ver.04
■PACKAGE DIMENSIONS
[CAUTION] The specifications on this data book are only given for information, without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.
SSOP14
1 7
8
6.4±
0.3
4.4±
0.2
0.22±0.1
0.1
1.15
±0.1
0.1±
0.1
0.65
0.5±
0.2
0.15-0.05+0.1
0 ~ 10º
0.67MAX
5.0 -0.1+0.3
14
0.1 M
UNIT:mm