HIGH PRESSURE TUBINGS 15-150K PSI 26
Group Tube and pipe seamless Family High pressure tubings
HIGH PRESSURE TUBING
Ratings From 20.000 to 60.000 PSI
Standard material grade TP316/316L
Operating temperature range From -252°C to +649°C
External surface finish Bright finish - free from lamps/flws/fissures
Bore surface finish Minimum 100 RMS = 2.3 Ra μm = 92 AARH
Standard lenght of each pieces 6/7 mt. - shorter lengths also available
Standard certification EN 10204 3.1
Standard non- destructive test Eddy current ASTM A450/E426
Special materials
- Hastelloy - Superduplex
- Inconel - Monel
- Duplex
Standard size
Wall Tickness
Weight
0.207 Kg/mt
0.395 Kg/mt
0.889 Kg/mt
P20MPD218A 316SS 3/8" 0.203" 0.086"
O.D. I.D. W.T.
In (mm) In (mm) In (mm)
P20MPF178S 304SS (6,35) (2.77) (1.78)
P20MPF178A 316SS 1/4" 0.109" 0.070"
CODE MATERIALS
Tube Size in (mm)
P20MPA318A 316SS 9/16" 0.312" 0.125"
P20MPD218S 304SS (9.53) (5.16) (2.18)
P20MPA318S 304SS (14.3) (7.92) (3.17)
Working Pressure Psi (bar)
20,000 (1380)
20,000 (1380)
20,000 (1380)
General tollerances
O.D. and I.D.: ± 0.1 mm
W.T.: ± 10 % mm
P150HPN478A 316SS
(3.2) (3.13)
(7.94) (1.58) (4.78)
P100UPD313A 316SS
P100HPA475A 316SS9/16" 0.188" 0.187"
5/16" 0.062" 0.188"0,373 Kg/mt
(4.78) (4.78)
0,233 Kg/mt(6.35) (1.59) (3.17)
3/8" 0.125" 0.123"0,496 Kg/mt
(9.53)
1,118 Kg/mt(14.3) (4.77) (4.75)
100,000 (6895)
100,000 (6895)
0.889 Kg/mt
(11.1)
0.438" 0.156"
(3.96)1.512 Kg/mt
2.758 Kg/mt
P20MPH396S 304SS (19.1)
P20MPH396A 316SS 3/4"
P20MPA318S 304SS (14.3) (7.92) (3.17)
0.562"
P20MPI556S 304SS (25.4)
P20MPI556A 316SS 1"
(14.3)
0.219"
(5.56)
P60HPF211A 316SS 1/4" 0.083" 0.083"0,228 Kg/mt
P60HPA478A 316SS 9/16" 0.187" 0.187"
3/8" 0.125" 0.125"0,500 Kg/mt
0.125"
P60HPF211S 304SS (6.35) (2.11) (2.11)
316SSP100UPF317A
150,000 (10345)
1,135 Kg/mtP60HPA478S 304SS (14.3)
1/4" 0.06"
20,000 (1380)
20,000 (1380)
20,000 (1380)
60,000 (4140)
60,000 (4140)
60,000 (4140)
100,000 (6895)
P60HPD318S 304SS (9,53) (3.18) (3.18)
P60HPD318A 316SS
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com LU-TU-010-A
Group Tube and pipe seamless Family High pressure tubings
Recommended Bend Radius
LUME INTERNATIONAL Medium & High Pressure Tubing (304 and 316 SS)
Operating temperature range From -252°C to +649°C
External surface finish Bright finish - free from lamps/flws/fissures
Bore surface finish Minimum 100 RMS = 2.3 Ra μm = 92 AARH
Standard lenght of each pieces 6/7 mt. - shorter lengths also available
Standard certification EN 10204 3.1
Standard non- destructive test Eddy current ASTM A450/E426
Ratings From 10.000 to 60.000 PSI
3/8" x 0,203 1,75 (44,5)
9/16" x 0,312 2,625 (66,7)
3/4" x 0,438 1,75 (89,9)
20.000 psi (1.379 bar)
size (inch)MR (min)
Inches (mm)
1/4" x 0,109 1,25 (31,8)
3/8" x 0,125 1,75 (44,5)
9/16" x 0,189 2,625 (66,7)
Mandrel Radius (inches)
60.000 psi (4.137 bar)
size (inch)MR (min)
Inches (mm)
1/4" x 0,083 1,25 (31,8)
Mandrel Radius
(MR)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 1460.000 psi
59.000 psi
58.000 psI
60.000 psi (4.137 bar) High
Pressure tubings
20.000 psi
19.000 psi
18.000 psi
20.000 psi (1.379 bar)
Medium Pressure tubings
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
MA
WP
psi
(b
ar
x 1
00
)
20.000 psi (1.379 bar) High
Pressure tubings
Steel grade austenitic chemical composition (%)
Mechanical properties
0,1
100.000 689 110.000 758 18 0,004 0,1
40.000
60.000
2.758
4.137
95
95
100.000 689 110.000 758 18 0,004
0,1
100.000 689 110.000 758 18 0,004 0,1
20.000
30.000
1.379
2.068
95
95
75.000 517 105.000 724 22 0,004
Min Yeld 0.2% Offset Min. Tensile Strength Min.
Elongation Max. Radial defect depth
PSI N/mm2 PSI N/mm2 % inches mmPSI bar
Rating Min.
Hardness
HRB
ASTM TP UNS DIN EN
S30400
S32100
S31600
S31603
TP 304
TP 321
TP 316
TP 316L
C
≤0.03
≤0.08
≤0.03
≤0.03
1.4301
1.4541
1.4401
1.4404 10.00-15.0016.00-18.00
- <2.00 <0.030 <0.75 <0.045
11.00-14.00
- <2.00 <0.030 <0.75 <0.045
9.00-13.00
2.00-3.00 <2.00 <0.030 <0.75 <0.045
2.00-3.00 <2.00 <0.030 <0.75 <0.045
18.00-20.00 8.00-11.00
16.00-18.00
17.00-20.00
18.00-20.00TP 304L S30403 1.4306 ≤0.03
Cr Ni Mo MN
- <2.00 <0.030 <0.75 <0.045
8.00-12.00
S SI P
9/16" x 0,359 2,625 (66,7)
3/4" x 0,516 3,5 (89,9)
1" x 0,688 4,625 (117,5)
1" x 0,562 2,625 (117,5)
10.000 psi (690 bar)
size (inch)MR (min)
Inches (mm)
3/4" x 0,438 1,75 (89,9)
10.000 psi
9.000 psi
8.000 psi
10.000 psi (2.756 bar)
Medium Pressure tubings
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
MA
WP
10.000 psi (4.137 bar) High
Pressure tubings
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com LU-TU-020-A
Group High pressure products Family High pressure tubings
Threaded male nipples
LU20A26C02A1 NIPPLE 3/8" OD 20KPSI L=2.5"
- Tubing size from 1/4" to 1"
- Pre-machined nipples available from stock.
- Coned-and-threaded connection
- Nipples are manufactured from cold worked 316L stainless steel.
- Operating temperatures from -423ºF (-252ºC ) to 1200ºF (649ºC).
- Special material and special length nipples available.
- Stock nipple lengths from 2" (50.8 mm) to 12.0" (304.8 mm).
TYPE / LENGTH (L)CODE
LU60A26C02G
LU60A26C01H
LU60A26C01E
LU60A26C02F
NIPPLE 1/4" OD 60KPSI L=12"
LU60A26C02H NIPPLE 3/8" OD 60KPSI L=12"
LU60A26C03E NIPPLE 9/16" OD 60KPSI L=6"
NIPPLE 3/8" OD 60KPSI L=10"
LU60A26C01D NIPPLE 1/4" OD 60KPSI L=4"
TYPE / LENGTH (L)CODE
LU60A26C01A1 NIPPLE 1/4" OD 60KPSI L=2.5"
LU60A26C01C NIPPLE 1/4" OD 60KPSI L=3"
NIPPLE 3/8" OD 20KPSI L=4"
NIPPLE 3/8" OD 20KPSI L=6"
LU20A26C02D
LU20A26C02E
NIPPLE 3/8" OD 60KPSI L=8"
LU20A26C01A
LU20A26C01B
LU20A26C01C
LU20A26C01D
LU20A26C01E
LU20A26C01F
LU20A26C01G
LU20A26C01H
LU20A26C02A
LU20A26C02B
NIPPLE 1/4" OD 20KPSI L=2"
NIPPLE 1/4" OD 20KPSI L=2.75"
NIPPLE 1/4" OD 20KPSI L=3"
NIPPLE 1/4" OD 20KPSI L=4"
NIPPLE 1/4" OD 20KPSI L=6"
NIPPLE 1/4" OD 20KPSI L=8"
NIPPLE 1/4" OD 20KPSI L=10"
NIPPLE 1/4" OD 20KPSI L=12"
NIPPLE 3/8" OD 20KPSI L=2"
LU20A26C01A1 NIPPLE 1/4" OD 20KPSI L=2.5" LU60A26C01B NIPPLE 1/4" OD 60KPSI L=2.75"
NIPPLE 3/8" OD 20KPSI L=2.75"
LU60A26C01F
LU60A26C02D NIPPLE 3/8" OD 60KPSI L=4"
LU60A26C02E NIPPLE 3/8" OD 60KPSI L=6"
NIPPLE 1/4" OD 60KPSI L=8"
LU60A26C01G NIPPLE 1/4" OD 60KPSI L=10"
NIPPLE 1/4" OD 60KPSI L=6"
NIPPLE 1" OD 20KPSI L=12"
NIPPLE 9/16" OD 60KPSI L=12"
LU60A26C03F NIPPLE 9/16" OD 60KPSI L=8"
LU60A26C03H
LU60A26C03E NIPPLE 9/16" OD 60KPSI L=6"
High prressure products
NIPPLE 3/8" OD 20KPSI L=6"
NIPPLE 3/8" OD 20KPSI L=8"
NIPPLE 3/8" OD 20KPSI L=10"
NIPPLE 3/8" OD 20KPSI L=12"
NIPPLE 9/16" OD 20KPSI L=4"
NIPPLE 9/16" OD 20KPSI L=6"
NIPPLE 9/16" OD 20KPSI L=8"
LU20A26C03E
LU20A26C02E
LU20A26C02F
LU20A26C02G
LU20A26C02H
LU20A26C03D
NIPPLE 9/16" OD 20KPSI L=10"
NIPPLE 9/16" OD 20KPSI L=12"
NIPPLE 3/4" OD 20KPSI L=4"
NIPPLE 3/4" OD 20KPSI L=6"
NIPPLE 3/4" OD 20KPSI L=8"
NIPPLE 3/4" OD 20KPSI L=10"
NIPPLE 1" OD 20KPSI L=4"
NIPPLE 1" OD 20KPSI L=6"
NIPPLE 1" OD 20KPSI L=8"
NIPPLE 1" OD 20KPSI L=10"
High Pressure Needle and Ball Valves from 15,000
to 60,000 psi
Adapters
LUME Offer a complete range of adapters
LU60A26C03G NIPPLE 9/16" OD 60KPSI L=10"
LU20A26C05D
LU20A26C05E
LU20A26C05F
LU20A26C03F
LU20A26C03G
LU20A26C03H
LU20A26C04D
LU20A26C04E
LU20A26C04F
LU20A26C04G
LU20A26C04H
LU20A26C05G
LU20A26C05H
NIPPLE 3/4" OD 20KPSI L=12"
LUME manufactures manual coning and threading
tools for optimum performance with tubing size up
to 9/16" (14,3mm)
Tools
www.lumeinternational.com LU-TU-030-A
Group High pressure products Family High pressure tubings
15,000 psi (1034 bar)
20,000 psi (1379 bar)
40,000 psi (2758 bar)
60,000 psi (4137 bar)
Report about pressure cycle test and burst pressure tests on pipe type:
Weight:
P20MPF180A
316SS
1/4"
0.109"
0.070"
20,000 (1380)
0.207 Kg/mt
Code:
Material:
O.D. Size:
I.D. Size:
Wall Thickness:
Pressure cycle test Dp = 1000 bar on pipe samples of the type:
Working Pressure Psi (bar):
To determine the static strength, LUME INTERNATIONAL S.r.l.
provide burst pressure tests on different pipe type The burst
pressure tests will be carried out on the 15 kbar test bench
High Pressure Tubings:
Burst pressure:
146,551 Psi
10107 bar
Table 1 - Summaries the test result of the test
Table 2 - Summaries the test result of the test
8 0 2,000,000 PASSEDP20MPF400A 3 1050 50 1000
8 0 2,000,000 PASSED
P20MPF400A 2 1050 50 1000 8 0 2,000,000 PASSED
P20MPF400A 1 1050 50 1000
Comment
Tube typeserial-
number
Pressure (bar) pressure cycle-range frequency CyclesComment
max. min. Δp [bar] Hz Assembly Demonting
8 0 2,000,000 PASSED
Tube typeserial-
number
Pressure (bar)
max. min.
pressure cycle-range
Δp [bar]
frequency
Hz
Cycles
DemontingAssembly
P20MPF180A 3 1050 50 1000
8 0 2,000,000 PASSED
P20MPF180A 2 1050 50 1000 8 0 2,000,000 PASSED
P20MPF180A 1 1050 50 1000
The test is carried out on 6 pipe samples, 3 of the type P20MPH400A and 3 of the type P20MPF180A with a pressure stroke width of Δp = 1000 bar, at pmax =
1050 bar and pmin = 50 bar, with a frequency of f = 8 Hz. The test is carried out until all samples fail or until the number of limit load changes reaches 2 x 106
cycles.
Code: P20MPF180A
Material: 316SS
Working Pressure Psi (bar): 20,000 (1380)
Weight: 0.207 Kg/mt
O.D. Size: 1/4"
I.D. Size: 0.109"
Wall Thickness: 0.070"
Dimensions are for reference only, and are subject to change without notice
www.lumeinternational.com LU-TU-040-A
High pressure adapters
www.highpressuretubings.com
High pressure needle and ball valves High pressure accessories
CUSTOMER SATISFACTION
INNOVATION, SERVICE,
SOLUTIONSInnovation means understanding how things can be done differently, putting aside the way it has
always been done as innovation expresses the constant desire to improve.
Quality comes from professionalism and the attention to create a successful business.
Innovation is strictly connected to quality: these two words represent the goals we aim for; they
challenge us to create a relationship and a connection among all parties. Lume wants to represent
the link between the clients and the producers in order to solve issues and provide a high level of
service and customer satisfaction.
LUME INTERNATIONAL srl Vicolo Cassino 25/A - 35031 ABANO TERME (PD) - Italia Tel. +39 049 8630386 - Fax. +39 049 8638304
[email protected] - www.lumeinternational.com
Top Related