termosystem tegola EN - termoisolanti tegola_EN.pdfTERMOSYSTEM TEGOLA Features Unit Code EPS 100 EPS...
1
TERMOSYSTEM TEGOLA Features Unit Code EPS 100 EPS 150 EPS 200 EPS 100 graphite Standard % DS(N) ± 5 ± 5 ± 5 ± 5 EN 1603 BS KPa 150 200 250 150 EN 12089 CS(10) KPa CLASSIFICATION 100 150 200 100 EN 826 λ D 0.036 0.034 0.034 0.031 EN 13163 E E E E EN 13501/1 MU μ 40-60 70-90 90-120 40-60 EN 12086 Dimensional stability in specific temperature and humidity conditions Bend resistance Compression resistance at 10% crush risk Factor of resistance to dimensionless water vapour diffusion Thermal conductivity Fire resistance European classification Insulating waterproof system made up of the coupling of a sintered expanded polystyrene sheet in compliance with Standard EN 13163, specifically shaped to house planking suited to support the counterbatten to support the slate tiles, coupled with 3.5 kg/m2 sheathing, reinforced with polyester TNT and self-protected with slate components in compliance with Standard EN 13707. The panel is equipped with two continual overlapping selvages. DIMENSIONS: length 1,800 mm - width 1,000 mm - thickness from 40 to 120 mm SINTERED EXPANDED POLYSTYRENE in compliance with EN 13163 ISOSYSTEM SRL Via dell’Artigianato, 25 - Ponte di Piave - Treviso - Italy Tel. +39 0422 858070 - Fax +39 0422 759654 www.termoisolanti.com - [email protected] Classification F F Fire performance °C EN 1110 :1999 °C UNI EN 1109 :1999 UNI EN 1928/B:2000 % EN 1107-1:1999 KPa % N50/mm UNI EN 12311-1:1999 UNI EN 12311-1:1999 N 110 -5 ± 0.3 ± 0.3 ≥ 100 530 350 40 40 100 100 120 -5 ± 0.3 ± 0.3 ≥ 200 550 400 40 40 100 100 UNI EN 12310-1:1999 EN 13501-1 2005 EN 11925-2 Flexibility when cool Shape stability in presence of heat Dimensional stability Longitudinal Transverse Water resistance Tensile strength Longitudinal maximum load Transverse maximum load Elongation to rupture Longitudinal Transverse Tear resistance Longitudinal Transverse Description U. M. Polyester STANDARD Smooth Aut. Min TECHNICAL SPECIFICATIONS OF BITUMEN-BASED ELASTOPLASTOMERIC BEFORE COUPLING Solid fir wood planks 50 x 40 x 1,000 mm placed with centre distance of 60 cm WARNINGS: The information which features in the present technical specifications, provides a general description of the product. It remains however the role and responsibility of the user to check that the product and relative documentation are suited to the particular application in compliance with legislation and standards currently in force. ISOSYSTEM Srl reserves the right to, at an any moment and without forewarning, make any type of modification, including termination of production. Supply is based upon our production capacity.
Transcript of termosystem tegola EN - termoisolanti tegola_EN.pdfTERMOSYSTEM TEGOLA Features Unit Code EPS 100 EPS...
TERMOSYSTEM TEGOLA
Features Unit Code EPS 100 EPS 150 EPS 200 EPS 100 graphite Standard
% DS(N) ± 5 ± 5 ± 5 ± 5 EN 1603
BS KPa 150 200 250 150 EN 12089
CS(10) KPa
CLASSIFICATION
100 150 200 100 EN 826
λD 0.036 0.034 0.034 0.031 EN 13163
E E E E EN 13501/1
MU µ 40-60 70-90 90-120 40-60 EN 12086
Dimensional stability inspecific temperature and humidity conditions
Bend resistance
Compression resistance at 10% crush risk
Factor of resistance to dimensionless water vapour diffusion
Thermal conductivity
Fire resistance European classification
Insulating waterproof system made up of the coupling of a sintered expanded polystyrene sheet in compliance with Standard EN 13163, specifically shaped to house planking suited to support the counterbatten to support the slate tiles, coupled with 3.5 kg/m2 sheathing, reinforced with polyester TNT and self-protected with slate components in compliance with Standard EN 13707. The panel is equipped with two continual overlapping selvages.DIMENSIONS: length 1,800 mm - width 1,000 mm - thickness from 40 to 120 mm
SINTERED EXPANDED POLYSTYRENE in compliance with EN 13163
ISOSYSTEM SRLVia dell’Artigianato, 25 - Ponte di Piave - Treviso - Italy
Tel. +39 0422 858070 - Fax +39 0422 759654www.termoisolanti.com - [email protected]
Classification F FFire performance
°C EN 1110 :1999°C UNI EN 1109 :1999
UNI EN 1928/B:2000
% EN 1107-1:1999
KPa
%
N50/mm UNI EN 12311-1:1999
UNI EN 12311-1:1999
N
110-5
± 0.3± 0.3
≥ 100
530
350
40
40
100
100
120-5
± 0.3± 0.3
≥ 200
550
400
40
40
100
100UNI EN 12310-1:1999
EN 13501-1 2005EN 11925-2
Flexibility when cool
Shape stability in presence of heat
Dimensional stabilityLongitudinalTransverse
Water resistance
Tensile strengthLongitudinal maximum load
Transverse maximum load
Elongation to ruptureLongitudinal
Transverse
Tear resistanceLongitudinal
Transverse
Description U. M.Polyester
STANDARDSmooth Aut. Min
TECHNICAL SPECIFICATIONS OF BITUMEN-BASEDELASTOPLASTOMERIC BEFORE COUPLING
Solid fir wood planks 50 x 40 x 1,000 mm placed with centre distance of 60 cm
WAR
NIN
GS:
The
info
rmat
ion
whi
ch fe
atur
es in
the
pres
ent t
echn
ical
spe
cific
atio
ns, p
rovi
des
a ge
nera
l des
crip
tion
of th
e pr
oduc
t. It
rem
ains
how
ever
the
role
and
res
pons
ibili
ty o
f the
use
r to
che
ck th
at th
e pr
oduc
t and
rel
ativ
e do
cum
enta
tion
are
suite
d to
the
part
icul
ar a
pplic
atio
n in
com
plia
nce
with
legi
slat
ion
and
stan
dard
s cu
rren
tly in
forc
e. IS
OSY
STEM
Srl
res
erve
s th
e ri
ght t
o, a
t an
any
mom
ent a
nd w
ithou
t for
ewar
ning
, mak
e an
y ty
pe o
f mod
ifica
tion,
incl
udin
g te
rmin
atio
n of
pro
duct
ion.
Sup
ply
is b
ased
upo
n ou
r pr
oduc
tion
capa
city
.
