Specifications PS-470/N PS-570/N - NIPROS
Transcript of Specifications PS-470/N PS-570/N - NIPROS
PS-470/NPS-570/N
Specifications
Specifications PS-470/N
PS-470/N
SMPTE Via OPT Cable from Base Station when AC operation onlyV-mount x1 When DC operationV-mount x1 For the cameraCAMTAP female x2
120 W*
8P x1 for SONY/for Panasonic using the 8P-10P adaptor cable2.5φ Mini jack x1 for LANC
BNC x1 Voltage type : Output voltage : 2-4V=Green/4.1-5V=Red (Side connector panel) : RED tally, with Hi/Lo/OFF switch
XLR 4P male x1
SMPTE LEMOapprox. 2 km(1.25 miles)
Intercom Headset
Tally Signal OutputTally Indicator
Remote Connector
DC Input
DC Output
DC Power OutputMax.
REMOTE :REMOTE L :
TALLY OUT :
INTERCOM HEADSET :
OPT :BATTERY IN :DC 15V OUT :DC 15V OUT :
Power requirementOperating temperatureStorage temperatureWeightDimensions (WxHxD)
SocketMaximum distance
SDI Input
SDI Through OutputSDI Return Output
SDI IN :
SDI OUT THROUGH OUT :RET OUT :
OPT :
0℃ to +40℃ (+32°F to +104°F)-20℃ to 60℃ (-4°F to +140°F)approx. 1.45 kgapprox. 149 x 148 x 91 mm (Main body)
DC 12 V / approx. 20 W MAX.DC operation : BATTERY IN :
Timecode InputTimecode OutputReference Output
TC IN :TC OUT :REF OUT :
BNC x1BNC x1BNC x1
BNC x13G/HD/SDBNC x1 SDI IN SDI Input Through Output BNC x13G/HD/SD
DC Power
Intercom
Tally
Remote
Opt. Fiber Cable
General
Input/Output
Accessories
*But the output may be limited by the condition of the load or the input, etc.
*When DC operation,Base station cannotsupply the DC powerto Camera adaptor.
with DC power supplied from Base Station via optical fiber cable
Features, design and specifications are subject to change without notice.BNC cable 0.4m x1 / BNC cable 1m x1 / Remote controller cable x1 / Operation Manual / Warranty
Specifications PS-570/N
PS-570/N
8P female x1 for SONY/for Panasonic using 8P-10P adaptor cable2.5φ Mini jack x1 for LANC
D-Sub 25P x1 ON/OFF(Short to GND) type R TALLY IN/G TALLY IN
BNC x2 (1/1) PROD/ENG 2 lines ※ for FD-400A onlyD-Sub 25P x1 PROD IN/OUT / ENG IN/OUT 2 linesXLR 4P female x1 with INTERCOM PROD/ENG switch
AC 100/200 VXLR 4P x1 DC 12 VSMPTE via OPT Cable to Camera Adaptor
※ INTERCOM/TALLY IN D-Sub 25P is shared between following. INTERCOM PROD IN/OUT / ENG IN/OUT, R/G TALLY IN, AUDIO-PGM IN
SMPTE LEMOapprox. 2 km (1.25 miles)
Input/Output
Power requirement
Operating temperatureStorage temperatureWeightDimensions (WxHxD)
PlugMaximum distance
Remote connector REMOTE :REMOTE L :
Tally signal Input INTERCOM/TALLY IN :
Intercom
Intercom Headset
2W INTERCOM PROD/ENG :INTERCOM/TALLY IN :HEADSET :
AC IN :DC IN :OPT :
SDI OUT :
RET IN :
DC InputDC InputDC OutputDC Power OutputMax.
150 W*
approx. 3.8 kgapprox. 215 x 71 x 302 mm
SDI Output
Return Input
OPT :
Time Code InputTime Code Output Reference Input
TC IN :TC OUT :REF IN :
BNC x1 BNC x1BNC x1
BNC x23G/HD/SDBNC x13G/HD/SD
DC Power
Intercom
Tally
Remote
Opt. Fiber Cable
General
Accessories
AudioINTERCOM/TALLY IN : AUDIO IN : D-Sub 25P x1 AUDIO-PGM 1/2 IN ANALOG 2 channels
*But the output may be limited by the condition of the load or the input, etc.
*When DC operation,Base station cannotsupply the DC powerto Camera adaptor.
Audio Input
with DC power supplied to Camera Adaptor via optical fiber cable
AC operation : AC IN : DC operation : DC IN :
AC 100/200 VXLR 4P x1 DC 12 V / approx. 20 W MAX.
0 ℃ to +40℃ (+32°F to +104°F)-20℃ to +60℃ (-4°F to +140°F)
Features, design and specifications are subject to change without notice.
AC cable / Operation Manual / Warranty
Dimensions PS-470/N
PS-470/N
CAMTAP-
+DC 15V OUT(MAX.3.5A)
SIGNAL INDICATOR
MIC
AUDIO-PGM 1
H.P VOL
INTERCOM
ON
OFF
CAMTAP-
+DC 15V OUT(MAX.3.5A)
TALLYOFF
REMOTEREMOTE L
TALLY OUTREF OUT
TC OUT TC IN
RET OUT SDI IN
SDI OUTTHROUGH OUT
INTERCOM HEADSET
OPTION
92 149
148
Dimensions (unit: mm)
Dimensions
Dimensions (unit: mm)
2020721
PS-570/N
PS-570/N
215
302
HEADSET
POWERON
OFF
ON
OFF
MIC
PGM 1 H.P LEVEL PROD
ENG
SIGNAL INDICATOR
OPTIONSDI OUT 1 RET IN REF IN REMOTE
TC IN TC OUT REMOTE L
INTERCOM / TALLY IN 2W INTERCOM 2W INTERCOM PROD ENG
OPT
DC IN 12V
AC IN 100V-200V
OPTION
71