SDS M2000-338 FREE FLOAT STEAM TRAP - TLV · PDF fileSize L HH1 W Weight (kg) 15 20 25 6.5 6.6...
Click here to load reader
Transcript of SDS M2000-338 FREE FLOAT STEAM TRAP - TLV · PDF fileSize L HH1 W Weight (kg) 15 20 25 6.5 6.6...
Specifications
5, 10, 14, 22, 320.5, 1.0, 1.4, 2.2, 3.20.5, 1.0, 1.4, 2.2, 3.2
2, 5, 10, 14, 22, 32, 40, 460.2, 0.5, 1.0, 1.4, 2.2, 3.2, 4.0, 4.60.2, 0.5, 1.0, 1.4, 2.2, 3.2, 4.0, 4.6
PRESSURE SHELL DESIGN CONDITIONS (NOT OPERATING CONDITIONS):Maximum Allowable Pressure (MPaG) PMA: 4.0 (JH5RL-X), 4.6 (JH5RL-B), 8.0 (JH5RH-B) Maximum Allowable Temperature (°C) TMA: 425
No.q
w
eF
rR tMR y uMR iR oR
!0
!1 !2 !3MR !4 !5MR !6R !7R !8R !9R @0R
@1R @2R
@3R
@4R
@5R
@6R
@7
@8
@9
DescriptionBody
Cover JH5RH-B
FloatOrificeOrifice GasketOrifice PlugOrifice Plug GasketFloat CoverScreen inside/outside 2)
Flange/Socket 3)
Cover BoltJH5RH-B
Cover NutCover GasketConnectorConnector GasketX-element GuideX-elementSpring ClipAir Vent Valve SeatSnap RingAir Vent CaseBimetal PlateAir Vent ScreenAir Vent Valve SeatAir Vent Valve PlugSnap RingNameplateDrain Plug Gasket 4)
Drain Plug 4)
MaterialCast Steel Carbon SteelCast SteelStainless Steel
—Soft IronCast Stainless SteelSoft IronStainless SteelStainless SteelCarbon SteelAlloy SteelAlloy SteelCarbon SteelGraphite/Stainless SteelStainless SteelGraphite/Stainless SteelStainless SteelStainless SteelStainless SteelStainless SteelStainless SteelCast Stainless SteelBimetalStainless Steel
Stainless SteelStainless SteelSoft IronCarbon Steel
JIS——
SUS316L—
SUYPSCS2ASUYPSUS304SUS430/304
—SNB7SNB16S45C– /SUS316LSUS416– /SUS316LSUS304
—SUS304SUS420FSUS304
——
SUS304
SUS304SUS304SUYPS25C
ASTM/AISI 1)
A216 Gr.WCBA105A216 Gr.WCBAISI316L
—
— — —̶ ̶ ̶
AISI1010A743 Gr.CA40AISI1010AISI304AISI430/304A105A193 Gr.B7A193 Gr.B16AISI1045– /AISI316LAISI416– /AISI316LAISI304
—AISI304AISI420FAISI304A351 Gr.CF8
—AISI304
AISI304AISI304AISI1010AISI1025
1 MPa = 10.197 kg/cm2
ModelConnectionSize (mm)Orifice No.Maximum Operating Pressure (MPaG) PMOMaximum Differential Pressure (MPa) ΔPMX Minimum Operating Pressure (MPaG)Maximum Operating Temperature (°C) TMOType of Air Vent
Screwed15, 20, 25
JH5RL-X Socket Welded
0.01240
X-element (6 °C subcooling)
15, 20, 25, 40, 50Flanged FlangedSocket WeldedScrewed
15, 20, 25
JH5RL-B Socket Welded
0.01425
JH5RH-B
15, 20, 25, 40, 50808.08.0
0.01425
15, 20, 25, 40, 50Flanged
Bimetal (vents air up to approx. 100 °C)
1) Equivalent 2) JH5RL-B, JH5RH-B: inside only 3) Shown on reverse 4) OptionReplacement kits available: (M) maintenance parts, (R) repair parts, (F) float
JH5RL-B/JH5RH-B
To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range.Local regulations may restrict the use of this product to below the conditions quoted.CAUTION
JH5RL-X
FREE FLOAT®
STEAM TRAPMODEL JH5RL-X
JH5RL-B/JH5RH-B
JH5RL-X/B
JH5RL-X/B
—
q
w
e r
t
y
ui
o
!0
!1
!2
!3
!5
!4
!6!7
!8
!9
@0
@2@1
@3
@4
@5 @6
@7
@8
@9
SDS M2000-338
FeaturesA reliable and durable cast steel steam trap for use on small to medium-size process equipment. JH5RL-B/JH5RH-B are also suitable for both superheated and high-pressure process equipment.
1. Self-modulating free float provides continuous, smooth, low-velocity condensate discharge as process loads vary.
2. Precision-ground float, constant water seal and three-point seating design ensure a steam-tight seal, even under no-load conditions.
3. JH5RL-X: Thermostatic capsule (X-element) with “fail open” feature vents air automatically at close-to-steam temperature.
4. JH5RL-B/JH5RH-B: Thermostatic bimetal air vent valve vents air automatically for rapid startup.
5. Built-in screen with large surface area ensures extended trouble-free operation.
6. Easy, inline access to internal parts simplifies cleaning and reduces maintenance costs.
Patented (JH5RL-B/JH5RH-B)
FREE FLOAT STEAM TRAP WITH THERMOSTATIC AIR VENTING
L H H1 W Weight (kg)Size
15 20 25
6.5 6.6 6.7
234 246 258
φD φC hL H H1 W Weight (kg)Size
15 20 25 40 50
6.5 (10) 6.6 (10) 6.7 (10) 9.1 (13) 10 (14)
115 (125)
234 246 258
246
12
14
17
162 (172)
33 39.5 48 64
77.5
105 (107)
22.2 27.7 34.5 49.1 61.1
162
105
115
Size
1520254050
150RF239264309290300
300RF239264309290300
LASME Class
900RF*
269294319306316
600RF239264309290300
H
162(175)
H1
105(107)
W
115(125)
Other standards available, but length and weight may vary* Not standard for JH5RL-X/JH5RL-B ** Weight is for Class 600 RF (JH5RL-X/JH5RL-B), 900 RF (JH5RH-B)( ) JH5RH-B
* Rc(PT), other standards available
( ) JH5RH-B
Weight**(kg)
8.4 (14)9.8 (16)11 (20) 15 (24)19 (36)
Dimensions
Discharge Capacity
JH5RL-X/JH5RL-B Screwed* (mm)
JH5RL-X/JH5RL-B/JH5RH-B Socket Welded (mm)
JH5RL-X/JH5RL-B/JH5RH-B Flanged (mm)
JH5RL-X/JH5RL-B Screwed
JH5RL-X/JH5RL-B/JH5RH-B Socket Welded
JH5RL-X/JH5RL-B/JH5RH-B Flanged
JH5RL-X JH5RL-B/JH5RH-B
Dis
char
ge
Cap
acit
y (k
g/h)
Dis
char
ge
Cap
acit
y (k
g/h)
Differential Pressure (kg/cm2) Differential Pressure (kg/cm2)
Differential Pressure (MPa)1. Line numbers within the graph are orifice numbers.2. Differential pressure is the difference between the inlet and outlet pressure of the trap.3. Capacities are based on continuous discharge of condensate 6°C below saturated steam temperature.4. Recommended safety factor: at least 1.5.
DO NOT use traps under conditions that exceed maximum differential pressure, as condensate backup will occur!CAUTION
1000
700
500
300
200
100
700.01 0.03 0.05 0.1 0.2 0.3 0.5 1.0 1.4
2.2 3.22.0 3.0
0.1 0.3 0.5 1 2 3 5 10 14 20 3022 32
5 10 1422
32
Differential Pressure (MPa)
JH5RH-B
2
80
46
403222
14105
30
5070
100
200
300
500700800
108
0.1 0.3 0.5 1 2 3 5 10 1422
2032 46
3040 8050
0.030.01 0.05 0.1 0.2 0.3 0.5 1.01.42.2 3.2 4.6
8.05.02.0 3.04.0
WL
H1
H
WL
H1
H
D
WL
H1
H
C
h
SDS M2000-338 Rev. 3/2016Products for intended use only.
Specifications subject to change without notice.