Quality in motion - SKC Karbon · PantoDrive ® Quality in motion; Typical properties of our most...
2
PantoDrive ® Quality in motion ; Typical properties of our most important carbon grades for carbon current collectors Grade Density Resistivity Hardness Flexural strength Impregnation g/ccm μ Ω m HRB 5/150 N/mm 2 RH 84 1,73 34 95 37 – RH 84 M6 2,40 12 115 65 Cu Sn* RH 83 M6 2,80 7 110 85 Cu Sn* RH 85 M6 3,40 4 110 95 Cu Sn* *Cu Sn impregnation up to profile length of 1.150 mm ; Typical performance data Choice of references for railway, local transportation and engineering companies m DB AG, SNCF, Nedtrain, ÖBB, CD, VR, UK, SBB, DSB, AMTRAK, CNR m Berlin, München, Köln, Karlsruhe, Antwerpen, Rom, Neapel, Brüssel, Wien, Zürich, Basel, Istanbul, Prag, Guangzhou, Shenzhen, Honkong, Manila m Bombardier Transportation, Alstom, Stemmann Technik GmbH (D), Brecknell Willis (UK), Faiveley Transport LEKOV (CZ), TransTech (USA) Large-series use of our ADD- system m Deutsche Bahn AG (DB) m NedTrain (NS), m Österreichische Bundesbahn (ÖBB) m Finnische Staatsbahn (VR), m Großbritanien (WCML, EC, NXEA), m Hongkong (MTR) m Chinesische Eisenbahn (CNR), m Schweizerische Bundesbahn (SBB) Mechanical and electrical high strength bond m Shear strength of the bond: > 5 N/mm 2 m Temperature resistance up to 250°C (rated value), up to 300°C ( ≤ 1min.) m Short- circuit current load up to 30 kA (tested with AC 16 2 / 3 Hz, half wave) m Contact resistance between carbon profile/Al-carrier < 1,0 mΩ (plain carbon) < 0,5 mΩ (metallized carbon) m Current carrying capacity Grade RH 84: 6–8 A/mm contact line Grade RH 84 M6: 9–12 A/mm contact line Grade RH 83 M6 (metallized): 12–15 A/mm contact line Grade RH 85 M6 (metallized): 16–20 A/mm contact line Top values for service life time m RH 84: Light Railways 120 - 200 Tkm Long distance trains 140 - 150 Tkm High speed trains (ICE) 180 - 220 Tkm m RH 83 M6 (high current appl.): Light Railways 60 - 100 Tkm Long distance trains 120 - 140 Tkm m RH 85 M6 (very high current appl.): E.M.U. 70 - 90 Tkm ; Electrical Contacts – Our Competence PanTrac – emerged from the consolidation of the electrical contact businesses of SGL Carbon GmbH, Werk Ringsdorff and Elektrokohle Lichtenberg AG, Berlin – is a center of competence for electrical contacts within the E-Carbon Group. Compact Carbon Current Collectors ; Advantages of PanTrac Carbon Current Collectors Your benefit: Reliability and low Life-Cycle-Cost m Low wear of the carbon material and the overhead wire m Lead free metallized carbon grades for high and very high current load (RH 84M6, RH 83M6, RH 85M6) m Bond between Al-carrier and carbon profile is by an electrically conductive glue m Bond is heat-resisting up to 300°C m Tested with short circuit current of 30 kA (half-wave 16 2 / 3 Hz) m Reliable Automatic-Dropping-Device system m Reliable – Quality Control System – (acc. to pr EN 50405) Electrical Contacts for railway applications are one main facet of our business. Carbon Current Collectors – made by PanTrac – distinguish themselves by excellent application performance. The carbon profiles are produced by SGL CARBON GmbH Werk Ringsdorff one of the largest manufacturer of carbon and graphite products worldwide.
Transcript of Quality in motion - SKC Karbon · PantoDrive ® Quality in motion; Typical properties of our most...
PantoDrive®
Quality in motion
; Typical properties of our most important carbon grades for carbon current collectorsGrade Density Resistivity Hardness Flexural strength Impregnation
g/ccm μΩm HRB 5/150 N/mm2
RH 84 1,73 34 95 37 –
RH 84 M6 2,40 12 115 65 Cu Sn*
RH 83 M6 2,80 7 110 85 Cu Sn*
RH 85 M6 3,40 4 110 95 Cu Sn*
*Cu Sn impregnation up to profile length of 1.150 mm
; Typical performance data
Choice of references for railway, local transportation and engineering companies
m DB AG, SNCF, Nedtrain, ÖBB, CD, VR, UK, SBB, DSB, AMTRAK, CNR
m Berlin, München, Köln, Karlsruhe, Antwerpen, Rom, Neapel, Brüssel, Wien,Zürich, Basel, Istanbul, Prag, Guangzhou, Shenzhen, Honkong, Manila
m Bombardier Transportation, Alstom, Stemmann Technik GmbH (D),Brecknell Willis (UK), Faiveley Transport LEKOV (CZ), TransTech (USA)
Large-series use of our ADD- system
m Deutsche Bahn AG (DB) m NedTrain (NS),
m Österreichische Bundesbahn (ÖBB) m Finnische Staatsbahn (VR),
m Großbritanien (WCML, EC, NXEA), m Hongkong (MTR)
m Chinesische Eisenbahn (CNR), m Schweizerische Bundesbahn (SBB)
Mechanical and electrical high strength bond
m Shear strength of the bond: > 5 N/mm2
m Temperature resistance up to 250°C (rated value), up to 300°C (≤ 1min.)
m Short- circuit current load up to 30 kA (tested with AC 16 2/3 Hz, half wave)
m Contact resistance between carbon profile/Al-carrier < 1,0 mΩ (plain carbon)< 0,5 mΩ (metallized carbon)
m Current carrying capacityGrade RH 84: 6–8 A/mm contact lineGrade RH 84 M6: 9–12 A/mm contact lineGrade RH 83 M6 (metallized): 12–15 A/mm contact lineGrade RH 85 M6 (metallized): 16–20 A/mm contact line
Top values for service life time
m RH 84: Light Railways 120 - 200 TkmLong distance trains 140 - 150 TkmHigh speed trains (ICE) 180 - 220 Tkm
m RH 83 M6 (high current appl.): Light Railways 60 - 100 TkmLong distance trains 120 - 140 Tkm
m RH 85 M6 (very high current appl.):E.M.U. 70 - 90 Tkm
; Electrical Contacts – Our Competence
PanTrac – emerged from the consolidation of the electrical contact businesses of SGL Carbon GmbH, Werk Ringsdorff and Elektrokohle Lichtenberg AG, Berlin –is a center of competence for electrical contacts within the E-Carbon Group.
Compact Carbon Current Collectors
; Advantages of PanTrac Carbon Current Collectors
Your benefit: Reliability and low Life-Cycle-Cost
m Low wear of the carbon material and the overhead wire
m Lead free metallized carbon grades for high and very high current load (RH 84M6, RH 83M6, RH 85M6)
m Bond between Al-carrier and carbon profile is by an electrically conductive glue
m Bond is heat-resisting up to 300°C
m Tested with short circuit current of 30 kA (half-wave 16 2/3 Hz)
m Reliable Automatic-Dropping-Device system
m Reliable – Quality Control System – (acc. to pr EN 50405)
Electrical Contacts for railway applications are one main facet of our business. Carbon CurrentCollectors – made by PanTrac – distinguish themselves by excellent application performance.
The carbon profiles are produced by SGL CARBON GmbH Werk Ringsdorff one of the largest manufacturer of carbon and graphite products worldwide.
; Contact for service and sales
PanTrac GmbHVulkanstraße 13 7 D-10367 BerlinGermany
Tel. +49-30 55 497 - 0Fax +49-30 55 497 - [email protected]
For further information please visit our home page www.pantrac.com
PanTrac GmbH is a member of
Carb
on C
urre
nt C
olle
ctor
s Re
liabl
e cu
rren
t co
llect
ion
for
all r
ailw
ay a
pplic
atio
ns
09/2010
Certificates; IFAM-Certificate 6701-2
; DB Mobility NetworkLogistics CertificateL1 supplier Q1 & E1
; DQS Certificate DIN EN ISO 9001DIN EN ISO 14001
; DQS Certificate OHSAS 18001
