Linear Tensile Tester - LASER COMPONENTS 10/17 / V02 / IF / 3sae/linear_tensile_tester The 3SAE...
1
1 10/17 / V02 / IF / 3sae/linear_tensile_tester The 3SAE Linear Tensile Tester is an automated tension tester for optical fi¬bers with cladding diameters ranging from 80-400 μm in diameter. The fi¬ber clamps accommodate coatings up to 1000 μm in diameter. The 3SAE Linear Tensile Tester incorporates easy, single button fiber loading and an automated tension test process. The built in LCD reports an acceptable "pass" result and maximum tension, in Newtons (N) or Kpsi, applied to the fiber during the tension test. The 3SAE Linear Tensile Tester also supports destructive testing by pulling and displaying the maximum achieved tension. The built in LCD and keypad ensures stand-alone operation and provides the operator easy access to software adjustable clamp pressure, maximum tension, tension rate and proof test hold times in 10 user selectable and customizable tension programs. These features, in combination with the compact design allows for extreme portability and flexibility for use in laboratory or production environments. The 3SAE Linear Tensile Tester includes a universal AC- 12V DC power supply and requires no additional external connections, such as air for operation or PC for configuration. An available RS-232 port provides the ability to update the firmware and supports data collection from any appropriately configured computer. LINEAR TENSILE TESTER Key Features: • Motorized clamping system eliminates need for external air supply • Easy low-maintenance bench top design • Built-in graphical LCD control (No PC required) • Storage up to 10 programs Technical Specifications: • Dimensions: 240 (W) x 187 (D) x 142 (H) mm • Weight: 5.2 kg • Power Source: 12 V DC, 100W • Fiber buffers: 160-1,000 μm • Tensile test: 40N • Resolution: 0.1N • Pulling speed: 200-1,000 μm/s Retractable Safety Shield Shown Above Product Part Number Qty Linear Tensile Tester LDS-01-0201 Standard Package Power Supply SPT-01-1243 1 Power Cord FPU-02-0037 1 *INFORMATION IS SUBJECT TO CHANGE WITHOUT NOTICE. Fiber Optics Germany & Other Countries Laser Components GmbH Tel: +49 8142 2864 – 0 Fax: +49 8142 2864 – 11 [email protected] www.lasercomponents.com United Kingdom Laser Components (UK) Ltd. Tel: +44 1245 491 499 Fax: +44 1245 491 801 [email protected] www.lasercomponents.co.uk
Transcript of Linear Tensile Tester - LASER COMPONENTS 10/17 / V02 / IF / 3sae/linear_tensile_tester The 3SAE...
1
10/
17 /
V02
/ IF
/ 3
sae/
linea
r_te
nsile
_tes
ter
The 3SAE Linear Tensile Tester is an automated tension tester for optical �¬bers with cladding diameters ranging from 80-400 μm in diameter. The �¬ber clamps accommodate coatings up to 1000 μm in diameter.
The 3SAE Linear Tensile Tester incorporates easy, single button �ber loading and an automated tension test process. The built in LCD reports an acceptable "pass" result and maximum tension, in Newtons (N) or Kpsi, applied to the �ber during the tension test. The 3SAE Linear Tensile Tester also supports destructive testing by pulling and displaying the maximum achieved tension.
The built in LCD and keypad ensures stand-alone operation and provides the operator easy access to software adjustable clamp pressure, maximum tension, tension rate and proof test hold times in 10 user selectable and customizable tension programs. These features, in combination with the compact design allows for extreme portability and �exibility for use in laboratory or production environments.
The 3SAE Linear Tensile Tester includes a universal AC- 12V DC power supply and requires no additional external connections, such as air for operation or PC for con�guration. An available RS-232 port provides the ability to update the �rmware and supports data collection from any appropriately con�gured computer.
LINEAR TENSILE TESTER
Key Features:• Motorized clamping system eliminates need for external air
supply
• Easy low-maintenance bench top design
• Built-in graphical LCD control (No PC required)
• Storage up to 10 programs
Technical Speci�cations:• Dimensions: 240 (W) x 187 (D) x 142 (H) mm
• Weight: 5.2 kg
• Power Source: 12 V DC, 100W
• Fiber bu�ers: 160-1,000 μm
• Tensile test: 40N
• Resolution: 0.1N
• Pulling speed: 200-1,000 μm/s
Retractable Safety Shield Shown Above
Product Part Number Qty
Linear Tensile Tester LDS-01-0201
Standard PackagePower Supply SPT-01-1243 1Power Cord FPU-02-0037 1
*INFORMATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
Fiber Optics
Germany & Other CountriesLaser Components GmbH Tel: +49 8142 2864 – 0 Fax: +49 8142 2864 – 11 [email protected]
United KingdomLaser Components (UK) Ltd. Tel: +44 1245 491 499 Fax: +44 1245 491 801 [email protected]
