Digimerge S1RA2G Installation Manual
-
Upload
jmac-supply -
Category
Documents
-
view
217 -
download
0
description
Transcript of Digimerge S1RA2G Installation Manual
S1RA2G_INSTALLATION_DIAGRAM_EN_R1
Weight (corner mount adapter only): 1.7kg / 3.7lbs
S1RA2GCorner Mount Adapter
Corner Mount Adapter 1pcs M8x25 Hex Bolt 4pcsSpring Washer 4pcsFlat Washer 4pcs
170.
0
119.
0
80.0
119.
090
.0
24384.048.0
Φ100.0Φ35.0
Φ56.0
Φ84.0
4-M8 EQU
4-M84-M66-M4
40.0
8-Φ9.0
130.0
138.
0
80.0
Corner Mount Adapter
M8×60 Bolt 4pcs
M8×25 Hex Bolt 4pcs
Flat Washer 4pcsSpring Washer 4pcsNut 4pcs
Spring Washer 4pcsFlat Washer 4pcs
13
2
4
Mark 4 holes through the corner mount adapter.
Drill holes into the surface. Insert the M8x60 bolts (4pcs) into the holes.
Place the corner mount against the wall. Use 1pcs
each M8x60 bolt (4pcs) to secure the corner mount adapter to the surface.
5
each M8x25 hex bolt (4pcs). Attach the mount (not included) to the corner mount adapter using the M8x25 hex bolts (4pcs).
M8x60 Hex Bolt 4pcsSpring Washer 4pcsFlat Washer 4pcsNut 4pcs
Make sure to install in an area that can support the total weight of the camera and accessories.
See www.�irsecurity.com/pro for the latest compatibility list.
INSTALLATION
PACKAGE CONTENTS DIMENSIONS (UNITS: mm)
4