1mm DC - 110GHz, Flange Launchers - SHF AG Test configuration VNA with millimeter wave modules...
1
-1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 0 10 20 30 40 50 60 70 80 90 100 110 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 0 10 20 30 40 50 60 70 80 90 100 110 Note: - All dimensions are in Millimeters. - (1) Temperature Range, short period:200 deg.C - (2) Tip of PIN to be touching "Pin Convex" in final assembly TYPE: KPC100M311 1mm Male TYPE: KPC100F311 1mm Female Typical Performance Note:(*) As Std Test Cofiguration 100M&F311 Rev.05 Oct.17 2006 DC - 110GHz, Flange Launchers 1mm SPECIFICATIONS: Electrical: Frequency Range DC - 110 GHz Return Loss Better than 15 dB (*) Insertion Loss <0.7dB (*) Electrical Length 11.1 mm [Nominal] Temperature Range -55 to +125 Deg.C (1) Mechanical: Body and Outer Conductors: -Gold Plated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 45 N-cm(Nominal) Connect/Disconnect Life >500 Cycles [Predicted] DESCRIPTION "KPC100F311 and KPC100M311" flange launchers are designed for ultra-broadband devices and units with coaxial I/O interfaces. Copyright(C) 2004 KAWASHIMA Mfg. Co., Ltd. All rights reserved. Specifications Subject to Change Without Notice. Kawashima Manufacturing Co., Ltd. 1-3-5 Higashiikuta, Tama-ku, Kawasaki 214-0031 JAPAN TEL: +81-44-911-7073 FAX: +81-44-911-9621 http://www.kmco.biz/ e-mail: [email protected] ISO9001:2000 Certified 12.15 Nominal 1.7+/-0.1 0.2+/-0.02 φ4.5 φ3.2+/-0.02 REF.PLANE 10.5 Nominal φ16.4+/-0.05 12.2+/-0.1 5.8+/-0.05 2-φ2.6 +0.05/-0 φ16.4+/-0.05 12.2+/-0.1 5.8+/-0.05 2-φ2.6 +0.05/-0 12.06 Nominal 1.7+/-0.1 0.2+/-0.02 φ4.5 φ3.2+/-0.02 REF.PLANE 10.5 Nominal φ0.363+/-0.005 φ1.115+/-0.005 0.8+/-0.02 0.03+0.02/-0.01 (Pin Convex) Std Test configuration VNA with millimeter wave modules Flange launcher test housing Length:8.005mm I.D=φ1.115mm Connector pin for test Length:9.465mm O.D=φ0.483mm KPC100M311 KPC100F311 Port 1 Port 2 Test Fixture Insertion Loss|S21|, dB Return Loss|S11|, dB Frequency GHz Incl. Test Fixture Loss (Insertable-device) 0+0.1/-0 Interface Mating Dimensions of KPC100 Male Female a b d e g M4 x 0.7 -6H HEX 6 Reference Plane f a b c M4 x 0.7 -6g Reference Plane a φ0.434 b φ1.000 c φ2.390 d φ2.358 e φ0.250 f 0-0.025 g 0-0.025 Calculated test fixture loss Frequency GHz (Number of samples : 2pairs) φ0.483+/-0.005 9.65+/-0.1 Connector PIN (2) : Heat treated BeCu 4-Slots Socket Contact The number of Connector PINs of 120% of number of Flange-Launches is shipped (round-up below decimal point).
Transcript of 1mm DC - 110GHz, Flange Launchers - SHF AG Test configuration VNA with millimeter wave modules...
-1.0
-0.9
-0.8
-0.7
-0.6
-0.5
-0.4
-0.3
-0.2
-0.1
0.0
0 10 20 30 40 50 60 70 80 90 100 110
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0 10 20 30 40 50 60 70 80 90 100 110
Note: - All dimensions are in Millimeters. - (1) Temperature Range, short period:200 deg.C - (2) Tip of PIN to be touching "Pin Convex" in final assembly
TYPE: KPC100M311 1mm Male
TYPE: KPC100F311 1mm Female
Typical PerformanceNote:(*) As Std Test Cofiguration
100M&F311 Rev.05 Oct.17 2006
DC - 110GHz, Flange Launchers1mm
SPECIFICATIONS: Electrical:
Frequency Range DC - 110 GHz Return Loss Better than 15 dB (*) Insertion Loss <0.7dB (*) Electrical Length 11.1 mm [Nominal] Temperature Range -55 to +125 Deg.C (1)
Mechanical:Body and Outer Conductors:
-Gold Plated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 45 N-cm(Nominal) Connect/Disconnect Life >500 Cycles [Predicted]
DESCRIPTION "KPC100F311 and KPC100M311" flangelaunchers are designed for ultra-broadbanddevices and units with coaxial I/O interfaces.
Copyright(C) 2004 KAWASHIMA Mfg. Co., Ltd. All rights reserved.
Specifications Subject to Change Without Notice.
Kawashima Manufacturing Co., Ltd.1-3-5 Higashiikuta, Tama-ku,
Kawasaki 214-0031 JAPANTEL: +81-44-911-7073 FAX: +81-44-911-9621
http://www.kmco.biz/ e-mail: [email protected]:2000 Certified
12.15 Nominal
1.7+/-0.10.2+/-0.02
φ4.5φ3.2+/-0.02
RE
F.P
LAN
E
10.5 Nominal
φ16.4+/-0.05
12.2
+/-
0.1
5.8+/-0.05
2-φ2.6+0.05/-0
φ16.4+/-0.05
12.2
+/-
0.1
5.8+/-0.05
2-φ2.6+0.05/-0
12.06 Nominal
1.7+/-0.10.2+/-0.02
φ4.5φ3.2+/-0.02
RE
F.P
LAN
E
10.5 Nominal
φ0.363+/-0.005
φ1.
115+
/-0.
005
0.8+/-0.02
0.03+0.02/-0.01
(Pin Convex)
Std Test configuration VNA with millimeter wave
modules
Flange launcher test housingLength:8.005mmI.D=φ1.115mm
Connector pin for testLength:9.465mmO.D=φ0.483mm
KPC100M311KPC100F311
Port 1 Port 2
Test Fixture
Insert
ion L
oss|S
21|, d
B R
etu
rn L
oss|S
11|, d
B
Frequency GHz
Incl. Test Fixture Loss
(Insertable-device)
0+0.1/-0
Interface Mating Dimensions of KPC100
MaleFemale
abd e
g
M4 x 0.7 -6H
HEX 6Reference Plane
f
a b c
M4 x 0.7 -6g
Reference Plane
a φ0.434b φ1.000c φ2.390d φ2.358e φ0.250f 0-0.025g 0-0.025
Calculated test fixture loss
Frequency GHz
(Number of samples : 2pairs)
φ0.483+/-0.005
9.65+/-0.1
Connector PIN(2): Heat treated BeCu
4-Slots Socket Contact
The number of Connector PINs of 120% of number of
Flange-Launches is shipped (round-up below decimal point).
![Unternehmen Startseite · STEICOjoist . Produktkenntnis Type flange b*h [mm] hight H [mm] length [m] STEICOjoist SJ 45 45 * 45 / 45 * 39 200 h. Standard length13,0 45 * 45 / 45 *](https://static.fdocument.org/doc/165x107/5f55a70ced3ebe40ea275a87/unternehmen-steicojoist-produktkenntnis-type-flange-bh-mm-hight-h-mm-length.jpg)
