Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 417/2017 53,...
Transcript of Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 417/2017 53,...
Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 417/2017 Απ. 5053, 8.12.2017
Απιθμόρ 417
ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 __________________
Γλσζηνπνίεζε βάζεη ηνπ Άξζξνπ 5 ηνπ Βαζηθνχ Νφκνπ 156(Η)/2002 θαη ηνπ Άξζξνπ 6 ηνπ Σξνπνπνηεηηθνχ Νφκνπ 57(Η)/2011
Με ην παξφλ γλσζηνπνηείηαη φηη βάζεη ησλ Άξζξσλ 5 ηνπ βαζηθνχ Νφκνπ 156(Η) ηνπ 2002 θαη 6 ηνπ ηξνπνπνηεηηθνχ
Νφκνπ 57(Η)/2011 πνπ ξπζκίδνπλ ηηο δξαζηεξηφηεηεο ηεο Σππνπνίεζεο, Γηαπίζηεπζεο θαη Σερληθήο Πιεξνθφξεζεο, ν Κππξηαθφο Οξγαληζκφο Σππνπνίεζεο (CYS) δεκνζηεχεη σο Κππξηαθά πξφηππα ηα πην θάησ Δπξσπατθά πξφηππα:
STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN)
01 Generalities. Terminology. Standardization. Documentation
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 1907:2017
Safety requirements for cableway installations designed to carry persons - Terminology
01.040.45 S/S CYS EN 1907:2005 =W/D
CYS EN 12440:2017
Natural stone - Denomination criteria 01.040.91 S/S CYS EN 12440:2008=W/D
CYS EN ISO 13567-1:2017
Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:2017)
01.110
S/S CYS EN ISO 13567-1:2002-iss1=W/D
CYS EN ISO 13567-2:2017
Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:2017)
01.110
S/S CYS EN ISO 13567-2:2002-iss1=W/D
CYS EN ISO 11073-10101:2005 /A1:2017
Health informatics - Point-of-care medical device communication - Part 10101: Nomenclature - Amendment 1: Additional definitions (ISO/IEEE 11073-10101:2004/Amd 1:2017)
01.040.35
CYS EN 13306:2017
Maintenance - Maintenance terminology 01.040.03
S/S CYS EN 13306:2010=W/D
03 Services. Company organization, management and quality. Administration. Transport. Sociology
CYS EN Document:
Title ICS1 Withdrawn
CYS CEN ISO/TS 17444-2:2017
Electronic fee collection - Charging performance - Part 2: Examination framework (ISO/TS 17444-2:2017)
03.220.20
S/S CYS CEN ISO/TS 17444-2:2013=W/D
11 Health care technology
CYS EN Document:
Title ICS1 Withdrawn
CYS EN ISO 16671:2015 /A1:2017
Ophthalmic implants - Irrigating solutions for ophthalmic surgery - Amendment 1 (ISO 16671:2015/Amd 1:2017)
11.040.70
3236
CYS CEN/TR 16953:2017
Medical gloves for single use - Guidance for selection 11.140
CYS EN 12791:2016 +A1:2017
Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2)
11.080.20
S/S CYS EN 12791:2016=W/D
CYS EN ISO 5359:2014 /A1:2017
Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases - Amendment 1 (ISO 5359:2014/Amd 1:2017)
11.040.10
13 Environment. Health protection. Safety
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 15882-1:2011 +A1:2017
Extended application of results from fire resistance tests for service installations - Part 1: Ducts
13.220.50
S/S CYS EN 15882-1:2011=W/D
CYS EN 342:2017
Protective clothing - Ensembles and garments for protection against cold
13.340.10
S/S CYS EN 342:2004 (+AC:2008) =W/D
CYS EN 14058:2017
Protective clothing - Garments for protection against cool environments
13.340.10 S/S CYS EN 14058:2004 =W/D
CYS EN ISO 27065:2017
Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017)
13.340.10
CYS EN 13277-8:2017
Protective equipment for martial arts - Part 8: Additional requirements and test methods for karate face protectors
13.340.20
CYS EN ISO 19918:2017
Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017)
13.340.10
CYS EN ISO 9696:2017
Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017)
13.060.60
CYS EN 15507:2017
Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
13.300 S/S CYS EN 15507:2008 =W/D
CYS EN 14450:2017
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets
13.310 S/S CYS EN 14450:2005 =W/D
CYS EN 13284-2:2017
Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
13.040.40
S/S CYS EN 13284-2:2004=W/D
CYS EN 13284-1:2017
Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
13.040.40
CYS EN 16766:2017
Bio-based solvents - Requirements and test methods 13.020.55
S/S CYS CEN/TS 16766:2015 =W/D
CYS EN ISO 11508:2017
Soil quality - Determination of particle density (ISO 11508:2017) 13.080.20
S/S CYS EN ISO 11508:2014 =W/D
CYS CEN/TR 15419:2017
Protective clothing - Guidelines for selection, use, care and maintenance of chemical protective clothing
13.340.10
S/S CYS CEN/TR 15419:2006 =W/D
3237
17 Metrology and measurement. Physical phenomena
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 13032-2:2017
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places
17.180.20
S/S CYS EN CYS EN 13032-2:2004-iss1=W/D
CYS EN 12102-1:2017
Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and cooling, dehumidifiers and process chillers
17.140.20 S/S CYS EN 12102:2013 =W/D
CYS EN ISO 6416:2017
Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)
17.120.20
S/S CYS EN ISO 6416:2005 =W/D
19 Testing
CYS EN Document:
Title ICS1 Withdrawn
CYS EN ISO 16371-2:2017
Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO 16371-2:2017)
19.100 S/S CYS EN 14784-2:2005=W/D
23 Fluid systems and components for general use
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 12627:2017
Industrial valves - Butt welding ends for steel valves 23.060.01
S/S CYS EN 12627:1999=W/D
CYS CEN/TS 15223:2017
Plastics piping systems - Validated design parameters of buried thermoplastics piping systems
23.040.01
S/S CYS CEN/TS 15223:2008=W/D
CYS EN 1451-1:2017
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
23.040.01
S/S CYS EN 1451-1:2000-iss1=W/D
25 Manufacturing engineering
CYS EN Document:
Title ICS1 Withdrawn
CYS EN ISO 22825:2017
Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
25.160.40
S/S CYS EN ISO 22825:2012=W/D
CYS EN ISO 10675-2:2017
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2017)
25.160.40
S/S CYS EN ISO 10675-2:2013=W/D
3238
CYS EN ISO 2143:2017
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
25.220.20
S/S CYS EN ISO 2143:2010 =W/D
CYS EN 16866:2017
Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
25.220.40
CYS EN ISO 17640:2017
Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2017)
25.160.40
S/S CYS EN ISO 17640:2010=W/D
CYS EN ISO 5175-2:2017
Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor (ISO 5175-2:2017)
25.160.30 S/S CYS EN 730-2:2002=W/D
CYS EN ISO 5175-1:2017
Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor (ISO 5175-1:2017)
25.160.30
S/S CYS EN 730-1:2002=W/D
27 Energy and heat transfer engineering
CYS EN Document:
Title ICS1 Withdrawn
CYS EN ISO 9806:2017
Solar energy - Solar thermal collectors - Test methods (ISO 9806:2017)
27.160
S/S CYS EN ISO 9806:2013 =W/D
35 Information technology
CYS EN Document:
Title ICS1 Withdrawn
CYS CEN/TS 17118:2017
Intelligent transport systems - Public transport - Open API for distributed journey planning
35.240.60
43 Road vehicles engineering
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 16973:2017
Road vehicles for combined transport - Semitrailer - Vertical transhipment
43.080.10
49 Aircraft and space vehicle engineering
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 6018:2017
Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
49.025.01
CYS EN 2997-006:2017
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard
49.060
S/S CYS EN 2997-006:2006 =W/D
CYS EN 3475-707:2017
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 707: Stabilization of assembly
49.060
3239
CYS EN 4674-004:2017
Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 004: Open sleeve - Outside pressurized area - EMI protection 10 kA - Temperature range - 65 °C to 200 °C - Product standard
49.060
S/S CYS EN 4674-004:2015 =W/D
CYS EN 4708-104:2017
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 104: Semi-rigid polyvinylidene fluoride (PDVF) - Operating temperature - 55 °C to 175 °C - Product Standard
49.060
CYS EN 6059-303:2017
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids
49.060
CYS EN 4652-221:2017
Aerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard
49.060
CYS EN 4652-322:2017
Aerospace series - Connectors, coaxial, radio frequency - Part 322: Type 3, N interface - Crimp version - Square flange receptacle - Product standard
49.060
CYS EN 4652-320:2017
Aerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard
49.060
CYS EN 4652-222:2017
Aerospace series - Connectors, coaxial, radio frequency - Part 222: Type 2, TNC interface - Crimp version - Square flange receptacle - Product standard
49.060
CYS EN 3904:2017
Aerospace series - Washers, wire locking in aluminium alloy, anodized
49.030.50
CYS EN 6049-008:2017
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C - Product standard
49.060
S/S CYS EN 6049-008:2013 =W/D
CYS EN 4652-321:2017
Aerospace series - Connectors, coaxial, radio frequency - Part 321: Type 3, N interface - Crimp assembly version - Right angle plug - Product standard
49.060
CYS EN 2346-005:2017
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard
49.060
S/S CYS EN 2346-005:2013 =W/D
CYS EN 4652-002:2017
Aerospace series - Connectors, coaxial, radiofrequency - Part 002: Specification of performances
49.060
61 Clothing industry
CYS EN Document:
Title ICS1 Withdrawn
CYS EN ISO 20536:2017
Footwear - Critical substances potentially present in footwear and footwear components - Determination of phenol in footwear materials (ISO 20536:2017)
61.060
65 Agriculture
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 14069:2017
Liming materials - Denominations, specifications and labelling 65.080 S/S CYS EN 14069:2003=W/D
CYS EN 13368-2:2017
Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 2: Determination of Fe chelated by [o,o] EDDHA, [o,o] EDDHMA and HBED, or the amount of chelating agents, by ion pair chromatography
65.080 S/S CYS EN 13368-2:2012=W/D
3240
71 Chemical technology
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 1406:2017
Chemicals used for treatment of water intended for human consumption - Modified starches
71.100.80 S/S CYS EN 1406:2009 =W/D
77 Metallurgy
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 12681-2:2017
Founding - Radiographic testing - Part 2: Techniques with digital detectors
77.040.20
CYS EN 10263-1:2017
Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
77.140.60
S/S CYS EN 10263-1:2002-iss1=W/D
CYS EN 10263-2:2017
Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
77.140.60
S/S CYS EN 10263-2:2001=W/D
CYS EN 10263-3:2017
Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
77.140.60
S/S CYS EN 10263-3:2001=W/D
CYS EN 10263-4:2017
Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering
77.140.60
S/S CYS EN 10263-4:2001-iss1=W/D
CYS EN 10207:2017
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
77.140.30 S/S CYS EN 10207:2005=W/D
CYS EN 12681-1:2017
Founding - Radiographic testing - Part 1: Film techniques 77.040.20 S/S CYS EN 12681:2003=W/D
CYS EN ISO 5754:2017
Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2017)
77.040.10
S/S CYS EN 25754:1993=W/D
CYS EN ISO 4492:2017
Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2017)
77.160
S/S CYS EN ISO 4492:2013 =W/D
CYS EN 10263-5:2017
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
77.140.60
S/S CYS EN 10263-5:2001=W/D
79 Wood technology
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 1870-6:2017
Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
79.120.10
S/S CYS EN 1870-6:2002 +A1:2009 =W/D
CYS EN 847-2:2017
Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools/circular saw blades
79.120.10
S/S CYS EN 847-2:2013=W/D
CYS EN 847-1:2017
Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades
79.120.10
S/S CYS EN 847-1:2013=W/D
3241
CYS EN 13227:2017
Wood flooring - Solid lamparquet products 79.080
S/S CYS EN 13227:2002 (+AC:2007) =W/D
CYS EN 15534-1:2014 +A1:2017
Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
79.080 S/S CYS EN 15534-1:2014=W/D
83 Rubber and plastic industries
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 301:2017
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
83.180 S/S CYS EN 301:2013 =W/D
CYS EN ISO 899-1:2017
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017)
83.080.01
S/S CYS EN ISO 899-1:2003-iss1=W/D
CYS EN ISO 22007-1:2017
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017)
83.080.01
S/S CYS EN ISO 22007-1:2012=W/D
CYS EN ISO 10350-1:2017
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
83.080.20
S/S CYS EN ISO 10350-1:2008 and A1:2014 =W/D
91 Construction materials and building
CYS EN Document:
Title ICS1 Withdrawn
CYS CEN/TR 115-3:2017
Safety of escalators and moving walks - Part 3: Correlation between EN 115-1:2008+A1:2010 and EN 115-1:2017
91.140.90
S/S CYS CEN/TR 115-3:2009=W/D
CYS EN 13126-8:2017
Building hardware - Hardware for windows and door height windows - Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware
91.190 S/S CYS EN 13126-8:2006=W/D
CYS EN 304:2017
Heating boilers - Test code for heating boilers for atomizing oil burners
91.140.10
S/S CYS EN 15034:2006-iss1, CYS EN 304:1992 (+A1:1998 and A2:2003) =W/D
CYS EN 13588:2017
Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test
91.100.50
S/S CYS EN 13588:2008=W/D
CYS EN ISO 8394-2:2017
Buildings and civil engineering works - Determination of extrudability for sealant - Part 2: Using standardized apparatus (ISO 8394-2:2017)
91.100.50
S/S CYS EN ISO 8394-2:2010 (+AC:2011) =W/D
3242
CYS EN 15643-5:2017
Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5: Framework on specific principles and requirement for civil engineering works
91.040.01
93 Civil engineering
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 12697-23:2017
Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens
93.080.20
S/S CYS EN 12697-23:2003 =W/D
CYS EN 12697-13:2017
Bituminous mixtures - Test methods - Part 13: Temperature measurement
93.080.20
S/S CYS EN 12697-13:2000 (+AC:2001) =W/D
CYS EN ISO 22476-10:2017
Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test (ISO 22476-10:2017)
93.020
S/S CYS CEN ISO/TS 22476-10:2005 =W/D
97 Domestic and commercial equipment. Entertainment. Sports
CYS EN Document:
Title ICS1 Withdrawn
CYS EN 16869:2017
Design/construction of Via Ferratas 97.220.40
ΓΗΟΡΘΩΔΗ Δ ΠΡΟΖΓΟΤΜΔΝΔ ΔΚΓΟΔΗ
CYS EN Document:
Title
Modifications
CYS EN ISO 11607-1:2017
Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006, including Amd 1:2014)
EN ISO 11607-1:2006, including Amd 1:2014 has been added in the European flyleaves. Titles and Forewords have been updated accordingly.
CYS EN ISO 11607-2:2017
Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006, including Amd 1:2014)
EN ISO 11607-2:2006, including Amd 1:2014 has been added in the European flyleaves. Titles and Forewords have been updated accordingly.
ΣΡΟΠΟΠΟΗΖΔΗ / CORRIGENDA
CYS EN 13865:2017/AC:2017
Surfaces for sports areas - Determination of angled ball behaviour - Tennis
3243