MODCON® PREMIUM PLUG SERIES · A6M (CAT6A) O = Options: Di˝erent Wire Diameter Angled Latch or...

Technical Spec.: Insulation Resistance: 1.000 MΩ Contact Resistance: 20mΩ Current/Voltage: 1,5A / 150 VWithstanding Voltage: 1.000 V AC/min Durability: Minimum 750 Mating Cycles Selective Gold Plating: 30 μ” or 50 μ” Contacts: Phosphor Bronze w Au Plating on Ni Housing: Polycarbonate UL94-V0 / UL94-V2 Operation Temperature: -40°C .... +85°C PLUG COMPLIES WITH TIA-1096-A REQUIREMENTS Conform to ANSI/TIA/EIA-568-B.2-10, ISO/IEC11801and CENELEC EN50173 for Category 6A/Class EA

Key Features: Excellent electrical performance Single-Step termination process – shield and contacts are crimped in 1 operation 360 degree shield termination Direct shield connection from cable to connector Management bar for ease of assembly Smooth gold plated contacts Contact design which allows solid or stranded conductor termination slim design for use in high density applications capability for eld termination hoods and color key rings in various colors

PART NUMBERS: PX8CY O-(G)X = U(unshielded) / S(shielded) C = Number of Contacts Y = IND (Industrial/Pro�net) A6M (CAT6A) O = Options: Di�erent Wire Diameter Angled Latch or Straight Latch Opening Angle of Strain Relief

G = Gold Plating; standard is 30μ“ - add G50 for 50 μ“ ASSEMBLY TOOLING

INELCO’s modcon® modular connectors are a part of one of the most advanced connector series on the market, with one of the broadest range of products. INELCO’s modcon® modular connectors are widely used in various applications. The modcon® modular PREMIUM plug series, with ADVANCED ALIGNMENT TECHNOLOGY, is a forward thinking development of a building block system for modular plugs, to be used for industrial and o ce environments.

CATEGORY WIRE MAN. BAR CONDUCTOR OD

CABLE OD

CAT6A - AAT ALIGNER

ANGLED LATCH STYLE

STRAIGHT LATCH STYLE

0,8 1,0 1,15

max. 6,5mm

CABLE O.D. < 6,5MM; PC

Pro net 100M

CABLE O.D. < 6,5MM; PC/PA66

<7,5MM; PA66

Pro net 100M

W/O WIRE MB - 1,35/1,60 / 1,70 max.

6,5mm max.

Pro net 1Gig

W/O WIRE MB -

max. 9,0mm

WWW.INELCOTECH.COM INFO@INELCOTECH.COM

1,35/1,60

MODCON® PREMIUM PLUG SERIES

All DIA in mm are incl. toleranceAWG is an estimation only and very depending on cable supplier and spec

Wire Aligner Wire Manager Hood

WMBA6M-08 WMBA6M WMBA6M-11 WMBA6M-1236 PWS1 MB-A6M PC-A6M-XX PCPA6M65-XX PCPA6M75-XX

wire ⌀ ≤ 0.8 mm wire ⌀ ≤1.0 mm wire ⌀ ≤1.15 mm wire ⌀ ≤ 1.0 mm ⌀ ≤ 6.5 mm ⌀ ≤ 6.5 mm ⌀ ≤ 7.5 mm

est. AWG 28 est. AWG 26 est. AWG 24 est. AWG 26 PC Zamak PC PA66 PA66

Profinet 100M

PS88A6M-HA ✔️ ✔️ ✔️

PS88A6M-HS ✔️ ✔️ ✔️

PS88A6M-HA ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

PS88A6M-HS ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

PS88A6M-HA ✔️ ✔️ ✔️ ✔️1 ✔️ ✔️ ✔️

PS88A6M-HS ✔️ ✔️ ✔️ ✔️1 ✔️ ✔️ ✔️

PS88A6M-HA ✔️ ✔️ ✔️ ✔️2 ✔️2 ✔️ ✔️ ✔️

PS88A6M-HS ✔️ ✔️ ✔️ ✔️2 ✔️2 ✔️ ✔️ ✔️

PS88A6M-HA ✔️ ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

PS88A6M-HS ✔️ ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

✔️1 could be used to improve values ✔️2 depending on cable and spec could be used either or - must be tested by customer

www.inelcotech.com info@inelcotech.com

INELCO - the home of unparalleled quality and service in INterconnection and ELectronic COmponents! Version: 191205

insilco® - inelco® - modcon® - intrajack® - compu-shield® - circon® - discom® - voice series®

insilco® - inelco® - modcon® - intrajack® - compu-shield® - circon® - discom® - voice series®www.inelcotech.cominfo@inelcotech.com

Wire Aligner Wire Manager Hood

WMBA6M-08 WMBA6M WMBA6M-11 WMBA6M-1236 PWS1 MB2-A6M PC-UX6M-XX PC-UA6M-XX PX-A6M-X

wire ⌀ ≤ 0.8 mm wire ⌀ ≤1.0 mm wire ⌀ ≤1.15 mm wire ⌀ ≤ 1.0 mm ⌀ ≤ 5.5 mm ⌀ ≤ 6.5 mm Color Rings

est. AWG 28 est. AWG 26 est. AWG 24 est. AWG 26 PC Zamak PC PC PP

Profinet 100M

PU88A6M-HA ✔️ ✔️ ✔️

PU88A6M-HS ✔️ ✔️ ✔️

PU88A6M-HA ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

PU88A6M-HS ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

PU88A6M-HA ✔️ ✔️ ✔️ ✔️1 ✔️ ✔️ ✔️

PU88A6M-HS ✔️ ✔️ ✔️ ✔️1 ✔️ ✔️ ✔️

PU88A6M-HA ✔️ ✔️ ✔️ ✔️2 ✔️2 ✔️ ✔️ ✔️

PU88A6M-HS ✔️ ✔️ ✔️ ✔️2 ✔️2 ✔️ ✔️ ✔️

PU88A6M-HA ✔️ ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

PU88A6M-HS ✔️ ✔️ ✔️ ✔️ ✔️ ✔️ ✔️

✔️1 could be used to improve values ✔️2 depending on cable and spec could be used either or - must be tested by customer

Latch Design Opening Strainrelief Wire Diameter Hood

Angled Straight 9° 50° ≤ 1.35 mm ≤ 1.60 mm ≤ 1.70 mm PCPA6M65-XX PCPA6M75-XX

est. AWG 23 - 24

est. AWG 22 - 23

est. AWG 22

⌀ ≤ 6.5 mm ⌀ ≤ 7.5 mm

PA66 PA66

PS84IND1 ✔️ ✔️ ✔️ ✔️ ✔️

PS84IND2 ✔️ ✔️ ✔️ ✔️ ✔️

PS84IND3 ✔️ ✔️ ✔️ ✔️ ✔️

PS84IND4 ✔️ ✔️ ✔️ ✔️ ✔️

PS84IND5 ✔️ ✔️ ✔️ ✔️

PS84IND6 ✔️ ✔️ ✔️ ✔️

PS84IND7 ✔️ ✔️ ✔️ ✔️

PS84IND8 ✔️ ✔️ ✔️ ✔️

PS84INDA ✔️ ✔️ ✔️ ✔️ ✔️

PS88IND2 ✔️ ✔️ ✔️ (✔️)

PS88IND6 ✔️ ✔️ ✔️ (✔️)

PS88INDA ✔️ ✔️ ✔️ (✔️)

Prerequisites• Plug PS84INDX (X = 1 - 6, A)• Hood Optional, PCPA6M65 for cable OD 6.5 mm, PCPA6M75 for cable OD 7.5 mm• Cable 6 mm < OD < 7.5 m, 2 twisted pairs, shielded, profinet, stranded or solid wires,

max. wire OD acc. to part 1.35 mm, 1.60 mm or 1.70 mm to max. 0.2 mm less• Tool Handtool K795 or insert U134 for air crimper machine from bex

Profinet

1: yellow2: orange3: white6: blue

12.12.2017

Wiring Scheme

Profinet1: yellow2: orange3: white6: blue

TIA 568 B1: white/ orange2: orange solid3: white/ green6: green solid

Step 1• Slide the hood over the cable• Strip the cable insulation min. 25 mm

Step 2• Turn the braid back over the cable• Trim the foil off

Step 3• Strip off the inner isolation• Make sure that all wires are intact

Step 4• Arrange the wires acc. to TIA 568 B• Profinet color scheme as above

ASSEMBLY INSTRUCTIONPS84INDX - RJ45 Profinet Industrial Plug 8P4C

Step 5• Cut the wires to a length of 20 mm from the end of the cable mantle

Step 6• Hold the plug housing with its contacts facing upwards

Step 7• Push the wires through the plug's holes until all wires are at front

Step 8• Bend the strain relief to the cable• Reduce its opening angle if needed

Step 9• Crimp the plug with handtool K795• Cut off the overlapping braid wires

Step 10• Control contacting and strain relief• Slide the boot over the plug

Step 3• Make sure that all wires are intact• Arrange them according to TIA 568 B

Step 2• Score and remove the screening foil• Untwist and straighten the wire pairs

Step 4• Cut the wires to a length of 20 mm from the end of cable's outer jacket

ASSEMBLY INSTRUCTIONPS88INDX - RJ45 Industrial Profinet Plug 8P8C

Prerequisites• Plug PS88INDX (X = 1 - 6)• Hood Optional, PCPA6M75 for cable OD 7.5 mm• Cable OD < 8.5 mm, 4 twisted pairs, shielded, profinet, stranded or solid wires,

max. wire OD acc. to part 1.35 mm or 1.60 mm to max. 0.2 mm less• Tool Handtool K791 or insert U137 for air crimper machine from bex

12.12.2017

Step 1• Strip the cable insulation > 20 mm• Turn the braid back over the cable

Wiring Scheme: TIA 568 B

1: white/ orange2: orange solid3: white/ green4: blue solid5: white/ blue6: green solid7: white/brown8: brown solid

Step 9• Choose die set for your cable OD• Crimp the plug with handtool K791

Step 7• Push the wires through the plug's holes until all wires are at front

Step 8• Bend the strain relief to the cable• Reduce its opening angle if needed

Step 5• Separate the solid colored wires up and the white colored wires down

Step 6• Hold the plug housing with its contacts facing upwards

Step10• Cut off the overlapping braid wires• Control contacting and strain relief

Step 3• Score the foil at a length of 2 mm, peel it off and assure all wires are intact

Step 1• Slide the hood over the cable• Strip the cable isolation by 50 mm

Step 2• Turn the braid back over the cable• Separate the pairs of wires

Step 4• Untwist and straighten the wires• Arrange them according to TIA 586 B

ASSEMBLY INSTRUCTIONPS88A6M - RJ45 Cat6A Shielded Premium Plug

Prerequisites• Plug PS88A6M, insert WMBA6M-08/ -10/ -11, metal wire manager MB-A6M• Hood Optional, PC-A6M or PCPA6M65 for cable OD 6.5 mm (PCPA6M75 for 7.5 mm)• Cable OD < 6.5 mm, 4 twisted pairs, shielded, min. Cat6A, stranded or solid wires,

max. wire OD acc. to insert: 0.80 mm, 1.00 mm or 1.15 mm to max. 0.2 mm less• Tool Handtool K791 or air crimper machine with insert U137 from bex

12.12.2017

Step 7• Cut the wires straight at insert's edge• Hold the plug with contacts upwards

Step 8• Push insert in plug until wires at front• Bend the strain relief to the cable

Step 5• Arrange the wire pairs into MB-A6M• Cut the wires diagonal for insertion

Step 6• Hold the insert's open side upwards• Thread all wires completely through

Step 10• Control contacting and strain relief• Slide the hood over the plug

Step 3• Score the foil at a length of 2 mm, peel it off and assure all wires are intact

Step 1• Slide the hood over the cable• Strip the cable isolation by 50 mm

Step 2• Turn the braid back over the cable• Separate the pairs of wires

Step 4• Untwist and straighten the wires• Arrange the wires acc. to TIA 586 B

ASSEMBLY INSTRUCTIONPS88A6M - RJ45 Cat6 Shielded Premium Plug

Prerequisites• Plug PS88A6M, insert WMBA6M-08/ -10/ -11• Hood Optional, PC-A6M or PCPA6M65 for cable OD 6.5 mm (PCPA6M75 for 7.5 mm)• Cable OD < 6.5 mm, 4 twisted pairs, shielded, min. Cat6, stranded or solid wires,

11.12.2017

Step 7• Cut the wires straight at insert's edge• Hold the plug with contacts upwards

Step 8• Push insert in plug until wires at front• Bend the strain relief to the cable

Step 5 • Cut the wires diagonal for insertion• Hold the insert's open side upwards

Step 6• Thread all wires completely through the insert' holes

Step 10• Control contacting and strain relief• Slide the hood over the plug

Step 1• Slide the hood over the cable• Strip the cable insulation > 20 mm

Step 2• Assure that all wires are intact• Separate the pairs of wires

Step • Arrange the wires into metal manager• Cut the wires diagonal for insertion

ASSEMBLY INSTRUCTIONPU88A6M - RJ45 Cat6A Unshielded Premium Plug

Prerequisites• Plug PU88A6M, insert WMBA6M-08/ -10/ -11, metal wire manager MB2-A6M• Hood Obligatory, PC-UX6M for cable OD 5.5 mm, PC-UA6M for cable OD 6.5 mm• Cable 5.5 mm < OD < 6.5 mm, 4 twisted pairs, unshielded, > Cat6A, stranded or solid,

12.12.2017

Step 9• Crimp the plug with handtool K750• Control contacting and strain relief

Step 7• Hold the plug with contacts upwards• Press the cable jacket into the plug

Step 5• Hold the insert's open side upwards• Pull wires completely through insert

Step 6• Reduce the space to the cable's jacket• Cut the wires straight at edge of insert

Step 8• Control that all wires are at front• Click the hood into the plug housing

Step 1• Slide the hood over the cable• Strip the cable insulation > 20 mm

Step 2• Assure that all wires are still intact• Separate the pairs of wires

Step 4• Cut the wires diagonal for insertion• Hold the insert with its arrow upwards

ASSEMBLY INSTRUCTIONPU88A6M - RJ45 Cat6 Unshielded Premium Plug

Prerequisites• Plug PU88A6M with insert WMBA6M-08/ -10/ -11• Hood Obligatory, PC-UX6M for cable OD 5.5 mm, PC-UA6M for cable OD 6.5 mm• Cable 5.5 mm < OD < 6.5 mm, 4 twisted pairs, unshielded, > Cat6, stranded or solid,

12.12.2017

Step 9• Crimp the plug with handtool K750• Control contacting and strain relief

Step 7• Press the cable jacket into the plug• Assure the strain relief is above jacket

Step 8• Control that all wires are at front• Click the hood into the plug housing

Step 5• Pull the wires completely through• Reduce the space to cable jacket

Step 6• Cut the wires straight insert's edge• Hold the plug with contacts upwards

Test Reportmodcon® - PS88A6M

Date: 2012.11.01 Page 1 of 11

Transmission Characteristics of PS88A6M /CAT6 shielded plug PS88A6M shielded CAT6 plug ful�lls the requirements for electrical transmission performance according to IEC 60603-7-51; detail speci�cation for 8-way, shielded, free and �xed connectors, for data transmissions with frequencies up to 500 MHz": 2010 and according to IEC11801 Ed. 2.2, Cat 6 : 2011 : - insertion loss - return loss - near-end crosstalk - far-end crosstalk - TCl - TCTl - transfer impedance

Di�erent length (0,5m, 1 m, 13m) of CAT 6 balanced cables assembled to PS88A6M ful�ll the RF performance (return loss, near-end crosstalk) according to IEC 61935-2: 2010 "Speci�cation for the testing of balanced and coaxial informationtechnology cabling - Part 2: Cords as speci�ed in ISOIIEC 11801 and related standards".

Date: 2012.11.01 Page 2 of 11

1. Insertion loss

1M 100M 200M 300M 400M 500M 600M-0,8

frequency [Hz]Test order : 12-0193date : 17.10.12

pair 12 pair 36 pair 45 pair 78

Cat6A Limit for connecting hardware acc. to IEC 60603-7-51: 2010 and ISO IEC 11801: 2011

Insertion loss of sample 1 INELCO CAT6 shielded plugPS88A6M

mated to Patchcord Test Head Cat 6A, Telegärtner PASS

1M 100M 200M 300M 400M 500M 600M-0,8

Insertion loss of sample 2 INELCO CAT6 shielded plugPS88A6M

Date: 2012.11.01 Page 3 of 11

2. Return loss

1M 100M 200M 300M 400M 500M 600M-70

plug side pair 12 pair 36 pair 45 pair 78

Return loss of sample 1

1M 100M 200M 300M 400M 500M 600M-70

plug side pair 12 pair 36 pair 45 pair 78

Return loss ofsample 2

INELCO CAT6 shielded plugPS88A6M

Date: 2012.11.01 Page 4 of 11

3. Near-end crosstalk

1M 100M 200M 300M 400M 500M 600M-110

frequency [Hz]

Test order : 12-0193date : 17.10.12

Near-end crosstalk between ... pairs 12/36 pairs 12/45 pairs 12/78 pairs 36/45 pairs 36/78 pairs 45/78

Near-end crosstalk of sample 1

1M 100M 200M 300M 400M 500M 600M-110

Near-end crosstalk between ... pairs 12/36 pairs 12/45 pairs 12/78 pairs 36/45 pairs 36/78 pairs 45/78

Near-end crosstalk of sample 2

Date: 2012.11.01 Page 5 of 11

4. Far-end crosstalk

1M 100M 200M 300M 400M 500M 600M-100

-20 Cat6A Limit for connecting hardware acc. to IEC 60603-7-51: 2010 and ISO IEC 11801: 2011

Far-end crosstalk between ... pairs 12/36 pairs 12/45 pairs 12/78 pairs 36/45 pairs 36/78 pairs 45/78

Far-end crosstalk of sample 1

1M 100M 200M 300M 400M 500M 600M-100

-20 Cat6A Limit for connecting hardware acc. to IEC 60603-7-51: 2010 and ISO IEC 11801: 2011

Far-end crosstalk between ... pairs 12/36 pairs 12/45 pairs 12/78 pairs 36/45 pairs 36/78 pairs 45/78

Far-end crosstalk of sample 2

Date: 2012.11.01 Page 6 of 11

5. TCL of connecting

1M 100M 200M 300M 400M 500M 600M-80

TCL of sample 1

1M 100M 200M 300M 400M 500M 600M-80

TCL of sample 2

Date: 2012.11.01 Page 7 of 11

6. TCTL

1M 100M 200M 300M 400M 500M 600M-80

TCTL of sample 1

1M 100M 200M 300M 400M 500M 600M-80

TCTL of sample 2

Date: 2012.11.01 Page 8 of 11

7. Transfer impedance

M001M01M1k0031

Test order : 12-0193date : 17.10.12

with Cat 7 cable; couple length 39cm

sample 3 sample 4

ΩΩ ΩΩ]

Frequency [Hz]

Test setup acc. to IEC 60512-26-100,Test 26e: 2008 ; triaxial method

Cat6A Limit for connecting hardware acc. to ISO IEC 11801: 2011

Transfer impedance of sample 3, 4

Cable ID: 21-151, PC-CAT6A: 0,5M Test Summary: PASSDate / Time: 01.11.2012 09:58:53 Operator: P. Pardal Model: DTX-1800Headroom 2.1 dB (NEXT 36-45) Software Version: 2.6300 Main S/N: 9132029Test Limit: ISO Patch Cord Cat6A 0.5m Limits Version: 1.8100 Remote S/N: 9132030Cable Type: Cat 6A FTP NVP: 74.0% Main Adapter: DTX-PC6A/MN ISO/IEC

Remote Adapter: DTX-PC6A/MN ISO/IEC

LinkWare Version 7.2

Length (m) [Pair 12] 0.4Prop. Delay (ns) [Pair 45] 3Delay Skew (ns) [Pair 45] 1Resistance (ohms) [Pair 45] 0.2

Worst Case Margin Worst Case ValuePASS MAIN SR MAIN SRWorst Pair 36-45 36-45NEXT (dB) 2.1 4.8Freq. (MHz) 294.0 500.0Limit (dB) 37.5 30.9

PASS MAIN SR MAIN SRWorst Pair 12 78RL (dB) 0.0* 3.0Freq. (MHz) 24.1 450.0Limit (dB) 24.0 10.2

Wire Map (T568B)PASS

* Measurement is within the accuracy limits of the instrument.

Cable ID: 21.151, PC-CAT6A: 1M Test Summary: PASSDate / Time: 01.11.2012 10:09:15 Operator: P. Pardal Model: DTX-1800Headroom 2.3 dB (NEXT 36-45) Software Version: 2.6300 Main S/N: 9132029Test Limit: ISO Patch Cord Cat6A 1.0m Limits Version: 1.8100 Remote S/N: 9132030Cable Type: Cat 6A FTP NVP: 74.0% Main Adapter: DTX-PC6A/MN ISO/IEC

Cable ID: 21-151, PC-CAT6A: 13M Test Summary: PASSDate / Time: 01.11.2012 10:08:18 Operator: P. Pardal Model: DTX-1800Headroom 4.6 dB (NEXT 36-45) Software Version: 2.6300 Main S/N: 9132029Test Limit: ISO Patch Cord Cat6A 10.0m Limits Version: 1.8100 Remote S/N: 9132030Cable Type: Cat 6A FTP NVP: 74.0% Main Adapter: DTX-PC6A/MN ISO/IEC

13.5 m

PS88A6M VALIDATION DOCUMENTATION

ID# Test Criteria Standards & Specs Procedures Result

1.0 Environmental Requirements

Non-operating Temperature Range -40 ͦ C to + 70 ͦ C Pass

Operating Temperature Range -10 ͦ C to + 60 ͦ C TIA-568-C.2, sect.5.7.1 Pass

Communications cables - safety

compliant to UL444 and NEC articles 800

UL444 - communications cable NEC - National electrical code

RoHS RoSH compliance Directive 2002/95/EC Pass

2.0 Electrical Requirements - Cable

DC resistance 14Ω max. TIA-568-C.2, sect.6.6.1 as per ASTM 4566 Pass

Resistance unbalance4% max for Cat 6A cable cord 5% max for Cat 5E / Cat 6 cable cord

TIA-568-C.2, sect.6.4.2 as per ASTM 4566 Pass

Mutual capacitance < 5.6 nF @1kHz , 20ͦ C TIA-568-C.2, sect.6.4.3 as per ASTM 4566 Pass

Capacitance unbalance <330 pF @1kHz , 20ͦ C TIA-568-C.2, sect.6.4.4 as per ASTM 4566 Pass

Dielectric strength (screened cable only)

Withstand 2.5 kV DC for 2sec (between conductors) Withstand 5 kV DC for 2sec (between cre shield and conductor)

TIA-568-C.2, sect.5.3.10 TIA-568-C.2, sect.5.6.8

as per IEC 60189-1 as per ASTM 4566 Pass

Surface transfer impedance (for screened cable only) < Z f Tcable =10 mΩ/m TIA-568-C.2, sect.

6.4.20as per IEC 62153-4-3 Pass

3.0 Electrical Requirements - Plug

Current rating 1.5 A IEC 60603-7 IEC 60603-7, section 6.4.3 Pass

Voltage rating 30 V AC Pass

UL94 UL94 V-0 UL1863 UL94 section 8 Pass

Insulation resistance (mating)

Insulation Resistance: - 500 MΏ Min.

IEC 60603-7 series, clause 6.4.7 IEC 60512-2, test 3A Pass

Voltage Proof (Mating) compliance IEC 60603-7 series Section 6.4.2

IEC 60512, Test 4a, Method A Pass

Contact Resistance 20 mOhm maximum (2a) IEC 60603-7 IEC 60512, 2a Pass

4,0 Physical Requirements

Conductor Material - CableFully annealed solid bare copper or stranded (tinned or bare) copper

Contact blade - PlugPhosphor bronze with 50 µ inch of Gold over Nickel Plating

Plug dimensions FCC Part 68, Subpart F, IEC 60603-7 compliance IEC 60603-7 IEC 60603-7 Pass

Crimp Height ±0.005" from nominal 0.237" IEC 60603-7 IEC 60603-7 section 3.2.2 (Parameter K2) Pass

5.0 Mechanical Requirements

Mechanical conformance for cord cable

Cord Cable Cat 6/6A : ANSI/ICEA S-102-732-2009 Cord Cable Cat 5E : ANSI/ICEA S-90-661-2006

TIA-568-C.2, sect 5.3 Pass

Pull Test 2lbf each wire UL1863 UL1863 section 40 Pass

Flex Test 90 degress UL1863 UL1863 section 39 Pass

Strain ReliefWithstand 1min without discontinuity of the signal (45 degree with 11.25 lbf)

UL1863 UL1863 section 26 Pass

Mechanical operations 750 operations TIA-568-C.2 , sect. A.3 IEC 60603-7 Pass

PS88A6M VALIDATION DOCUMENTATION

ID# Test Criteria Standards & Specs Procedures Result

6.0 Reliability Requirements - Plug

Mating Reliability test schedule

TIA-568-C.2 Annex A. Reference to Clause A.5.3

TIA-568-C.2 Annex A. IEC 60603-7 series

Reliability test schedule Pass

7.0 Transmission Requirements

Patch cord performance

NEXT : TIA-568-C.2, clause 6.9.2 Return loss : TIA-568-C.2, clause 6.9.1

TIA-568-C.2 , sect. 9

NEXT: TIA-568-C.2, clause C.5 Return Loss : TIA-568-C.2, clause C.5.3 see Belden TP-11001

Plug PerformancePlug- DNEXT as per Table C.2 and Table C.3 of TIA-568-C.2

TIA-568-C.2 , sect. C.4.4.3

TP-10027 (Plug- Dnext qualification) Pass

Cord Cable transmission performance

compliant to TIA-568-C.2 refer to tab 'Cord Cable performance'

TIA-568-C.2 as per TIA-568-C.2 Pass

MODCON® PREMIUM PLUG SERIES · A6M (CAT6A) O = Options: Di˝erent Wire Diameter Angled Latch or...

Documents

Transcript of MODCON® PREMIUM PLUG SERIES · A6M (CAT6A) O = Options: Di˝erent Wire Diameter Angled Latch or...

Aus der Klinik und Poliklinik für Strahlentherapie der ... · PE Plating Efficiency PFGE Pulsed field gel electrophoresis PIKK Phosphatidylinositol 3-kinase-like kinase RTOG Radiation

Power Logic Octal D-Type Latch - Texas Instruments · tpic6b273 power logic octal d-type latch slis031 – april 1994 – revised july 1995 post office box 655303 • dallas, texas

N-75N-75N-75N-75N-75N-75N-75N-75N-75 · K347-001-000 K347-002-000 CN3511X04-001-1/1 CN3511X34-001-1/1 RG179 5C-2V X04 X10 Pin Body Crimp Plating AS-In RG6A/U fig.1 Fig 1 Type Code

STAB KNIVES - kai-group.com · STAB KNIVES A-0F 0° A-15F 15° A-225F 22.5° A-30F 30° A-45F 45° Ref No. Description Angle CRESCENT KNIVES CPU-16AGF w=1.6mm, Angled 45° CPU-22AGF

Right angled triangle

Power Logic 8-Bit Addressable Latch (Rev. A) - TI. · PDF filePOWER LOGIC 8-BIT ADDRESSABLE LATCH ... enable G should be held high (inactive) while the ... Demultiplexer LHX H H Clear

Vol. 5 No.7/ Jul. 2011 A 12-bit Fully Differential SAR ADC ... · 7 A 12-bit Fully Differential SAR ADC with Dynamic Latch Comparator for Portable Physiological Monitoring Applications

Pb A product Line of Diodes Incorporated Lead-free Green · Q4 Q5 Q6 Q7 SADR_TRI BW_SEL_TRI PD# Pin Description Pin Number Pin Name Type Description 1 SADR_TRI Input Tri-level Latch

Edexcel GCSE (9-1) Maths: need-to-know formulae Edexcel GCSE (9-1) Maths: need-to-know formulae Pythagoras For a right-angled triangle, a2 + b2 = c2 sin xo = , cos xo = , tan xo =

C2 Edexcel Solution Bank - Chapter 10pmt.physicsandmathstutor.com/download/Maths/A-level/C2/Solutionb… · Solution: Draw a right-angled triangle with cos ...

BNC-75BNC-75BNC-75BNC-75BNC-75BNC-75BNC-75BNC-75 · L910-39 RG59 X04 X05 X09 Pin Body Coupling Plating AS-In For flexible cable Cable entry clamp RG179 fig.1 L910-39 fig.2 RG59 fig.3

熱処理を利用しためっき発色に関する研究...熱処理を利用しためっき発色に関する研究 三神武文・三井由香里・花形保*1 Study on the Plating

RIGHT-ANGLED ARTIN GROUPS AND A GENERALIZED … · Mod g;p 28 7.1. Decision problems in Mod g;p 28 7.2. Homological rigidity of right-angled Artin groups: no accidental isomorphisms

IEC 60601-2-52 CDV 2007-07-19 - PCB Assembly, PCB …€¦ · · 2010-06-0960601-2-52 © IEC:200Y – 4 – 62D/NNN/CDV Figure 119 c) – Angle γ between the angled back and the

TrigonometryTrigonometry UNIT 1: Naming the sides of a right-angled triangle ANSWERS page 153) a c b) a c b (a c b) a c b) e d f (n m o (12 13 5 (q p r (k j l) a c b (a c b a b c A

Hand Plating SystemThe Acumed Hand Plating System is intended for the management of fractures, fusions, and osteotomies of the distal, middle, and proximal phalanges and metacarpals

Dynamics in Two Dimensions - NJCTLcontent.njctl.org/courses/science/ap-physics-b/dynamics-2/dynamics... · Applied Force acting on the object ... FN = 30N ΣF = ma ... angled force?

Vol. 5 No.7/ Jul. 2011 A 12-bit Fully Differential SAR ADC with Dynamic ... · with Dynamic Latch Comparator for Portable Physiological Monitoring Applications Li Yu, Jin-yong Zhang,

Practica #4 LATCH - sc692207db6f0f43b.jimcontent.com · Practica #5 Decodificador de BCD a 7 ... Toma en cuenta que los capacitores cerámicos y los de poliester no tienen polaridad,

OPTIMUS NEURO SURGERY Plating Systemosteonic.com/_brochure/Neuro Plating System.pdf · 2020. 1. 3. · OPTIMUS NEURO SURGERY OPTIMUS SYSTEM Plating System. NEURO SCREW Self Drilling

熱処理を利用しためっき発色に関する研究...熱処理を利用しためっき発色に関する研究三神武文・三井由香里・花形保*1 Study on the Plating