STANDARD

SOLUTIONSLIFT

4

Μicroprocesor system for lift control

MAIN FEATURES/1• Up to 40 stops, each stop determinated as A or B side.• Up to 8 lifts in multiplex work.• CAN communication between modules.• Small dimensions.• Central procesor unit (CPU) width 72 mm. • Control panel width 120 mm for roomless lift.• Landing modules with integrated arrows and dot matrix display width 42 mm suitable for new instalation and

modernization, fi xed on landing plate with can / power connector for next stop without additional box in shaft.• Landing modules for landing calls connection and diff erent displays with diff erent protocols (for example

TFT,LCD,...) • LCD module for monitoring, adjustment and transfer parameters in LC100-C, adjust VVVF, load mesurement

device, connectable on any module in system (control panel, module on the top of car, displays, any landing modules).

• One travelling cable (18 + 2x2x0.5) with connectors on both sides.• All equipments in control panel, on cabine, in shaft, car operating panel, landing operating panels are plugable

with connectors PLUG & PLAY system.• Teleservis through internet from any point in the world with monitoring, adjusting and analyzing all I/O, calls,

parameters, statistic, errors and warnings.

MAIN FEATURES / 2• Software in all modules for all application is same. Diff erences in applications have to select only by parameters

in CPU and by address on landing modules.• Multiplex system without any necessary additional module.• All inputs have galvanic isolation, and they are equipt by LED diode.• All inputs / outputs on all modules are programable with user defi ned function and polarity. All input and

output are predefi ned for all aplication.• All landing modules are also displays or interface for displays.• Programabile marking for each stop on all type of displays without programing any display / landing module.

Programabile marking by parameters on CPU.• Delay for stopping are programable for each stop and direction.• More than 100 programable diff erent timers.• 256 last error and warning in real time with additional description (stop, drection of travel, state of door, etc.)• Daily, monthly, yearly and user defi ned travel counters • Integrated software for rescue system by standard UPS.• All display units in red and blue colors. Other colors on request.• Monitoring system via internet, ethernet, gsm modem.

LC100SYSTEM

5

6

CABLELC100MRL 120

LC100SYSTEM

7

LC100MRL400

LC100MRL650

LC100SYSTEM

8

LC100SYSTEM

9

LC100SYSTEM

L-1 L-2 L-3 (standard)

10

L-D

C. O. P.

SP-1 TFT Display.SP-2 DOT MATRIX Display.

P-4

P-1

P-5

P-2

SP-1 (standard)

SP-2

P-6

P-3

P-7

11

L. O. P.

12

M6-R

M5-R

M7-R

M8-R

TFT-LTFT-M

M8-B M8-W

M7-B M7-W

M6-B

M5-B

M6-W

M5-W

DOT

TFT

2 x 7 SEGMENT

DOTMATRIX

13

LC100-C

LC100-K

LC100-Z

LC100-S

LC100MODULE

14

LC100-H

LC100-J

LC100-F

LC100-E2

LC100-RLC100-T

LC100MODULE

15

LC100-PL

LC100-K2

LC100-VFD

LC100-SR

LC100MODULE

16

LC100-A

LC100-LLLC100-V

LC100-W2LC100-Y

LC100-V2LC100-I

LC100MODULE

17

LC100-G

LC100-B

LC100-D LC100 Monitoringsystem

LC100MODULE

22 N. Plastira str. Sykies Thessaloniki GreeceTel. 0030 2314 31 91 93, 0030 2310 62 82 70

www.dc-services.gr • dcservices.gr@gmail.com • kiorpes@dc-services.gr