Specifications Subject To Change Without Notice Rev 04-13 © Toner Cable Equipment, Inc.

969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l info@tonercable.com

Specifications

Rear View

DTS 397 ASI Splitter

Inputs

Outputs

ASIports

Alarmsignalingoutput

LEDDisplay

1 x ASI 1 x ASI Redundancy Configuration port

8 x ASI 1 x ASI Test

BNC, 75 Ω, (EN 50083-9)

D-Sub-9A-Alarm B-Alarm

System Fault, Error Data processing, Datarate < 0,1 Mbit/s, no useful MPEG-2 data, Signal detected, ASI-Redundancy input active

Configuration

PowerSupply

Mains voltage

Power consumption

General

Dimensions W/ H/ D (mm)Weight

• Auto Redundancy input will be switched automatically • Remote Redundancy input controlled by remote switch (Sub-Min-D Contact 4/5)

• ON Redundancy input active (switching in case of input error)• OFF Redundancy input not connected (no switching)

100 VAC to 240 VAC 50/60 Hz, Redundant power supply< 10 Watt

482.6/ 44.45/ 158 ; 19”, 1 RU3.5 kg