Zener Diodes MAZ4xxxN Series (MA4xxx(N) Series) · PDF fileRequest for your special attention...
-
Upload
trinhtuong -
Category
Documents
-
view
218 -
download
5
Transcript of Zener Diodes MAZ4xxxN Series (MA4xxx(N) Series) · PDF fileRequest for your special attention...
This product complies with the RoHS Directive (EU 2002/95/EC).Zener Diodes
1Publication date: February 2007 SKE00005EED
Parameter Symbol Conditions Min Typ Max Unit
Forward voltage VF IF = 10 mA 0.83 0.90 V
Zener voltage *2 VZ IZ Specified value V
Zener rise operating resistance RZK IZ Specified value Ω
Zener operating resistance RZ IZ Specified value Ω
Reverse current IR VR Specified value µA
Temperature coefficient of zener voltage *3 SZ IZ Specified value mV/°C
MAZ4xxxN Series (MA4xxx(N) Series)Silicon planar type
For stabilization of power supply
Features• Extremely low noise voltage caused from diode (1/3 to 1/10 of
our conventional MAZ4xxx series)• Extremely good rising performance (in the low-current range)• Easy-to-identify the zener-voltage rank by the color bands• Easy-to-select the optimum diode because of their finely di-
vided zener-voltage ranks• Easy-to-mount through the adoption of the small glass-sealed
DHD package (DO-34-A2)
Absolute Maximum Ratings Ta = 25°C
Unit: mm
Parameter Symbol Rating Unit
Forward current (Average) IF(AV) 250 mA
Repetitive peak forward current IFRM 250 mA
Power dissipation * PD 400 mW
Junction temperature Tj 200 °C
Storage temperature Tstg −65 to +200 °C
Common Electrical Characteristics Ta = 25°C ± 3°C *1
DO-34-A2 Package
φ 0.
40±0
0.5
1st Band2nd Band3rd Band
Cathode Anode
Colored bandindicatesVz classification
2.7±0.3 13.0 min.
φ1.55±0.2
13.0 min.
2.5+0.1 −0.3
Note) *: PD = 400 mW achieved with a printed circuit board
Refer to the list of the
electrical characteristics
within part numbers
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Absolute frequency of input and output is 50 MHz.
3. *1: The temperature must be controlled 25°C for VZ mesurement.
VZ value measured at other temperature must be adjusted to VZ (25°C)
*2: VZ guaranteed 20 ms after current flow.
*3: Tj = 25°C to 150°C
Note) The part number in the parenthesis shows conventional part number.
Mainten
ance/
Discon
tinued
Mainten
ance/D
iscont
inued
includ
es foll
owing
four P
roduct
lifecyc
le stag
e.
(planed
mainten
ance ty
pe, main
tenanc
e type,
planed
discon
tinued
typed,
discon
tinued
type)
This product complies with the RoHS Directive (EU 2002/95/EC).
2
MAZ4xxxN Series
SKE00005EED
MAZ4047N 4.42 4.66 4.90 2.0 1.0 80 5 800 0.5 −1.4 5 Yellow Purple Purple
MAZ4051N 4.84 5.11 5.38 1.0 2.0 60 5 500 0.5 − 0.8 5 Green Brown Brown
MAZ4056N 5.32 5.62 5.92 0.5 2.5 40 5 200 0.5 1.2 5 Green Blue Blue
MAZ4062N 5.86 6.20 6.53 0.2 4.0 30 5 100 0.5 2.3 5 Blue Red Red
MAZ4068N 6.47 6.81 7.14 0.1 4.0 20 5 60 0.5 3.0 5 Blue Gray Gray
MAZ4075N 7.07 7.45 7.83 0.1 5.0 20 5 60 0.5 4.0 5 Purple Green Green
MAZ4082N 7.77 8.20 8.63 0.1 5.0 20 5 60 0.5 4.6 5 Gray Red Red
MAZ4091N 8.57 9.05 9.53 0.1 6.0 20 5 60 0.5 5.5 5 White Brown Brown
MAZ4100N 9.47 10.01 10.54 0.05 7.0 30 5 60 0.5 6.4 5 Brown Black MAZ4110N 10.45 11.01 11.56 0.05 8.0 30 5 60 0.5 7.4 5 Brown Brown MAZ4120N 11.43 12.01 12.58 0.05 9.0 30 5 80 0.5 8.4 5 Brown Red MAZ4130N 12.46 13.21 13.96 0.05 10.0 35 5 80 0.5 9.4 5 Brown Orange MAZ4150N 13.84 14.68 15.51 0.05 11.0 40 5 80 0.5 11.4 5 Brown Green MAZ4160N 15.38 16.23 17.08 0.05 12.0 50 5 80 0.5 12.4 5 Brown Blue MAZ4180N 16.94 17.98 19.02 0.05 13.0 60 5 80 0.5 14.4 5 Brown Gray MAZ4200N 18.88 19.98 21.08 0.05 15.0 80 5 100 0.5 16.4 5 Red Black MAZ4220N 20.89 22.02 23.15 0.05 17.0 80 5 100 0.5 18.4 5 Red Red MAZ4240N 22.93 24.25 25.57 0.05 19.0 100 5 120 0.5 20.4 5 Red Yellow MAZ4270N 25.20 26.91 28.61 0.05 21.0 120 5 120 0.5 23.4 5 Red Purple MAZ4300N 28.22 29.98 31.74 0.05 23.0 160 5 160 0.5 26.6 5 Orange Black MAZ4330N 31.18 33.01 34.83 0.05 25.0 200 5 200 0.5 29.7 5 OrangeOrange MAZ4360N 34.12 36.02 37.91 0.05 27.0 250 5 250 0.5 33.0 5 Orange Blue MAZ4390N 37.04 39.02 40.99 0.05 30.0 300 5 300 0.5 35.6 5 Orange White
Electrical Characteristics within Part Numbers Ta = 25°C ± 3°C
Part numberVZ (V) IR RZ RZK SZ
IZ = 5 mA (µA) VR (Ω) IZ (Ω) IZ (mV/°C) IZMin Nom Max Max (V) Max (mA) Max (mA) Typ (mA) 1st. 2nd. 3rd.
Zener voltageReverse
current
Zener Zener rise Temperatureoperating operating coefficient ofresistance resistance zener voltage
Marking symbolColor indication
Main body:Light purple( )
Mainten
ance/
Discon
tinued
Mainten
ance/D
iscont
inued
includ
es foll
owing
four P
roduct
lifecyc
le stag
e.
(planed
mainten
ance ty
pe, main
tenanc
e type,
planed
discon
tinued
typed,
discon
tinued
type)
This product complies with the RoHS Directive (EU 2002/95/EC).MAZ4xxxN Series
3SKE00005EED
00 300150 200100 25050
100
200
300
400
500
600
700
800
Ambient temperature Ta (°C)
Pow
er d
issi
patio
n P
D (
mW
)
5 mm
1.6 mm Land diameter φ 3 mmCopper foilt = 0.035 mm
0 2 4 6 148 10 1612
10−3
10−2
10−1
1
10
Zener voltage VZ (V)
Zen
er c
urre
nt I
Z (
mA
)
Ta = 25°CStaticCharac-teristics
MA
Z40
47N
MA
Z40
51N
MA
Z40
68N
MA
Z40
56N
MA
Z40
82N
MA
Z41
00N
MA
Z41
10N
MA
Z40
91N
MA
Z40
75N
MA
Z40
62N
0 10 20 30 7040 50 8060
10−3
10−2
10−1
1
10
Zener voltage VZ (V)
Zen
er c
urre
nt I
Z (
mA
)
Ta = 25°CStaticCharac-teristics
MAZ4390NMAZ4360NMAZ4330NMAZ4300NMAZ4270NMAZ4240NMAZ4220NMAZ4200N
MAZ4180NMAZ4160NMAZ4150NMAZ4130NMAZ4120N
10−2
0 0.2 0.4 0.6 1.00.8 1.2
10−1
1
10
102
Forward voltage VF (V)
Forw
ard
curr
ent
I F (
mA
)
Ta = 25°C
10−3
0 2 4 6 8 10 12
10−2
10−1
1
10
Zener voltage VZ (V)
Zen
er c
urre
nt I
Z (
mA
)
Tj = 25°CDynamicCharac-teristics
MA
Z41
10N
MA
Z41
00N
MA
Z40
91N
MA
Z40
56N
MA
Z40
51N
MA
Z40
47N
MA
Z40
82N
MA
Z40
75N
MA
Z40
68N
MA
Z40
62N
0 10 20 30 40 50 60
Zener voltage VZ (V)
Zen
er c
urre
nt I
Z (
mA
)
10−3
10−2
10−1
1
10Tj = 25°CDynamicCharac-teristics
MA
Z41
20N
MA
Z41
30N
MA
Z42
40N
MA
Z43
00N
MA
Z43
60N
MA
Z43
90N
MA
Z42
70N
MA
Z43
30N
MA
Z41
60N
MA
Z41
50N
MA
Z41
80N
MA
Z42
00N
MA
Z42
20N
−5
0
5
10
15
20
25
30
35
0 10 20 30 40 50 60
Zener current IZ (mA)
Tem
pera
ture
coe
ffic
ient
of z
ener
vol
tage
SZ (
mV
/ °C
)
MAZ4330N
MAZ4240N
MAZ4200N
MAZ4110N
MAZ4068N
MAZ4047NMAZ4056N
1
10
102
103
1 10
Zen
er o
pera
ting
resi
stan
ce R
Z (
Ω)
Zener current IZ (mA)
Ta = 25°C
MAZ4330N
MAZ4240N
MAZ4200N
MAZ4056N
MAZ4110N
MAZ4047N
MAZ4068N
PD Ta IZ VZ IZ VZ
IF VF IZ VZ IZ VZ
SZ IZ RZ IZ
Mainten
ance/
Discon
tinued
Mainten
ance/D
iscont
inued
includ
es foll
owing
four P
roduct
lifecyc
le stag
e.
(planed
mainten
ance ty
pe, main
tenanc
e type,
planed
discon
tinued
typed,
discon
tinued
type)
This product complies with the RoHS Directive (EU 2002/95/EC).
4
MAZ4xxxN Series
SKE00005EED
Zth tW
• Comparison (1) of rise performance between MAZ4xxxN and MAZ4xxx series
• Comparison (2) of rise performance between MAZ4xxxN and MAZ4xxx series
1
10−1
10210110−1
Pulse width tW (s)
Tra
nsie
nt th
erm
al im
peda
nce
Zth
(°C
/ m
W)
Heat sinkThickness t = 1.6 mmCopper foil t = 0.035 mmLand diameter φ 3 mmPitch distance 5 mm
14121086420
10−2
10−3
10−4
10−5
10−6
10−7
10−8
Zener voltage VZ (V)
Zen
er c
urre
nt I
Z (
mA
)
MA
Z40
47
MA
Z40
51
MA
Z40
56
MA
Z40
47N
MA
Z40
51N
MA
Z40
56N
MA
Z40
62
MA
Z40
68
MA
Z40
75
MA
Z40
82M
AZ
4091
MA
Z41
10
MA
Z41
00
MA
Z41
20
MA
Z41
30
MA
Z40
62N
MA
Z40
68N
MA
Z40
75N M
AZ
4082
N
MA
Z40
91N
MA
Z41
10NM
AZ
4100
N
MA
Z41
20N
MA
Z41
30N
MAZ4000series
MAZ4000Nseries
10−8
10−2
10−3
10−4
10−5
10−6
10−7
20.0 22.5 27.525.0 30.0 32.5 35.0 40.0 40.537.5
Zener voltage VZ (V)
Zen
er c
urre
nt I
Z (
mA
)
MA
Z42
20
MA
Z42
40
MA
Z42
70
MA
Z43
00
MA
Z43
30
MA
Z43
60
MA
Z42
20N
MA
Z42
40N
MA
Z42
70N
MA
Z43
00N
MA
Z43
30N
MA
Z43
60N
MAZ4000series
MAZ4000Nseries
IZ VZ
IZ VZ
Mainten
ance/
Discon
tinued
Mainten
ance/D
iscont
inued
includ
es foll
owing
four P
roduct
lifecyc
le stag
e.
(planed
mainten
ance ty
pe, main
tenanc
e type,
planed
discon
tinued
typed,
discon
tinued
type)
Request for your special attention and precautions in using the technical information andsemiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-ucts may directly jeopardize life or harm the human body. Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
Mainten
ance/
Discon
tinued
Mainten
ance/D
iscont
inued
includ
es foll
owing
four P
roduct
lifecyc
le stag
e.
(planed
mainten
ance ty
pe, main
tenanc
e type,
planed
discon
tinued
typed,
discon
tinued
type)