1998 MOBILE ES PRODUCT GUIDE

42

Speaker SectionSpeaker Type

Impedance

Circuit System

Inputs

Outputs

Maximum Outputs

Rated Outputs

Input Level Adj. Range

Cut-off Frequency

Low Boost

Power Requirements

Current Drain

Frequency Response

Mass

Supplied Accessories

Woofer16 cm (61/2"), Aluminum cone type

1 ohm

PWM (pulse width modulation) circuit

RCA pin jacks; high level input cords

RCA pin jacks (pass-through)

100 W

50 W (1% THD)

0.2 - 2.0 V (RCA pin)0.8 - 8.0 V (High level input)

50 - 140 Hz

0 - 10 dB (50 Hz)

12 V DC car battery (negative ground)

At rated output: 5A

35 Hz - 200 Hz

Approx. 3.6 kg (16 lb. 15 oz.)

Parts for installation and connections(1 set)

XS-TL1Digitally Powered Subwoofer

Ω High Efficiency Class D PWM AmplifierΩ 50W x 1Ch at 1 ohmΩ Adjustable 50-180Hz Lo-Pass FilterΩ Adjustable 50Hz EQ (0 to +10dB)Ω Adjustable Output Level & Phase

Ω 63/4" Aluminum Cone Driver w/Rubber SurroundΩ 1 ohm Voicecoil Matched to Digital AmpΩ Compact Vent-loaded Enclosure only 16" HighΩ Vertical or Horizontal Mount Bracket SuppliedΩ Preamp and High Level (speaker) Inputs

Design and specifications subject to change without notice.

Amplifier Board

Power Amplifier Section

System Section

Harness Plug Configuration

Plug Shown With Wires Facing Viewer

Pin Number Wire Color Description1 Black Ground2 Blue Remote Input3 Black (RCA) Aux Input Right Neg4 Black (RCA) Aux Input Left Neg5 Black (RCA) Line Out Right Neg6 Black (RCA) Line Output Left Neg7 Gray/Black Hi-Level-In Right Neg8 White/Black Hi-Level-In Left Neg9 Black Ground

10 Yellow Battery +11 Red (RCA) Aux Input Right Pos12 White (RCA) Aux Input Left Pos13 Red (RCA) Line Out Right Pos14 White (RCA) Line Output Left Pos15 Gray Hi-Level-In Right Pos16 White Hi-Level-In Left Pos

Height: 405 mm (approx 1515/16 in)

Width (Diameter): 200 mm (approx 77/8 in)

Dimensions