TS 200 Series - zvuková technika, Electro-Voice, Dynacord ...Dynacord | TS 200 Series TS 200 Series...
Transcript of TS 200 Series - zvuková technika, Electro-Voice, Dynacord ...Dynacord | TS 200 Series TS 200 Series...
-
Dynacord | TS 200 Series
TS 200 Series
www.dynacord.com
▪ High power multi-functional 2-way cabinet
▪ 300 Watts / 8 Ω
▪ DH-3 Titanium diaphragm driver
▪ Rotatable CAD optimized 90 x 40 CD horn
▪ 2 x Neodymium DND 6130-16 woofer
The TS 200 is an extremely compact, two-way high-performance loudspeaker, with a nominal powerhandling capacity of 300 W RMS, suitable for amultitude of highly demanding tasks. Its high SPL andprecisely controlled coverage pattern make it a primecandidate for tasks far more challenging than any youwould associate with a speaker of its size. Whetherused as a full range fill or delay with larger systems ordeployed in mobile applications as a medium-sizedFOH system in combination with passive or active (e.g.PowerSub 312 or PSD 215) subwoofers, the TS 200displays outstanding acoustic and mechanicalperformance. One of the physical benefits of theTS 200 is its weight. At less than 10 kg, it represents adramatic advance in lightweight engineering in thisclass. Very high intelligibility even in acousticallyproblematic rooms, is another of the great strengths ofthis loudspeaker. With its elegant, slender profile, theTS 200 is especially suitable for situations in whichtasteful and discrete styling is called for. All thiswithout compromise in terms of sound quality orpressure level. As well as in a host of mobileapplications, the TS 200 features really stand out inthe fixed installation market. Ultra-compact cabinetscapable of delivering very high sound pressure levelsmake the challenge for the acoustic & interiordesigners easier to overcome whenever the
appearance of the loudspeakers is of critical ordecisive importance to the interior design. In suchcircumstances the closed cabinet base included in thedelivery can be substituted for the one with the top-hat for a mounting pole intended for mobileapplications. For the low and medium frequencyranges, two extremely low-distortion DND 6130-16neodymium chassis in an array configuration are used.The high frequency range is transduced by an Electro-Voice DH-3 into an HPT94 constant directivity hornthat can be rotated with ease through 90° forhorizontal applications. The integrated crossover isphase-optimized and furthermore, it provides allloudspeakers with electronic protection againstthermal overload.The TS 200 is available in either black or white(TS 200W). For fixed installation, the WMK-10(WMK-10W) wall mounting kit is available. Theoptional FB-TS400 flying kit facilitates suspension ofthe device safely from a truss. Another highly practicalaccessory is the SH-TS200 carrying bag. Linear phaseFIR (finite impulse response) factory presets areavailable as well as presets for conventional digitalcontrollers.
-
Technical specifications
Color
• TS 200 Black (RAL 9005, jet black)
• TS 200W White (RAL 9010, pure white)
Cabinet Full-range
Configuration Passive 2-Way
Nominal impedance 8 Ω
Power handling: Full-range
• Rated power RMS 300 W
• Program power 600 W
• Peak power 1200 W
SPL 1 W/1 m 97 dB
Max. SPL at 1 m (calculated withpeak power)
128 dB
Frequency range (-10 dB) 90–20000 Hz
Nominal coverage angle 90° x 40°
X-Over frequency 2200 Hz
Voice coil tracking protection Halogen
Component HIGH Electro-Voice DH-3
Component LOW 2 x DND 6130-16
Connector
• Model 2 x NEUTRIK speakON NL4
• Contacts full-range 1+, 1-
• Contacts wired through 1+, 1-
Product dimensions (Width xHeight x Depth)
199 x 513.5 x 239.5 mm
Net weight 10 kg
Enclosure material Aluminum
Grille Steel
Suspension 8 x M6
NEUTRIK and speakON are registered trademarks of Neutrik AG.
Horn HPT 94
2,5A
1,25A
2µ2
10µ
0µ33
0µ33
0µ33
DN
D61
30-1
6
DH3
DN
D 6
130-
16
B1
B2
RED
RED
RED
RED
BLA
CK
BLACK
BLACK
GREY
GREY
YELLOW
24V/70W 24V/70W
24V/70W 24V/70W
H2 H2
H2 H2
INPUT
Thru
TS200
S1
S2
L1
C2
C1
C5
C4
C3
L2
+IN_X2
-IN_X1
+IN
_X1
-IN_X2
HI+.
HI-.
B/LO+.
A/LO+.
A/LO-.
B/LO-.
V2
V3 V4
V1
LA1
LA2
LA3
++
-- 1
1
2
2
++
-- 1
1
2
2
Circuit diagram
20 100 1k 10k 20k60
65
70
75
80
85
90
95
100
105
110
f / Hz
SP
L /
dB
Frequency Response, 1/6 Oct.
Frequency response
20 100 1k 10k 20k1
2
5 10
20
50 100
200
f / Hz
|Z| /
Ω
Impedance, 1/6 Oct.
Impedance
20 100 1k 10k 20k10
20
3040
6080
100
200
360
f / Hz
φ / d
eg
−6dB Beamwidth, 1/1 Oct.
horizontal
vertical
Beamwidth
2 | TS 200 Series
-
20 100 1k 10k 20k0
5
10
15
20
25
DI
/ d
B
Directivity Index DI, Directivity Factor Q, 1/1 Oct.
1
2
5
10
20
50
100
200
Q
f / Hz
Directivity
Horizontal Directivity, 5dB/Div, 50dB Radius, 1/1 Oct.0°
30°
60°
90°
120°
150°±180°
−150°
−120°
−90°
−60°
−30°
63 Hz
0°30°
60°
90°
120°
150°±180°
−150°
−120°
−90°
−60°
−30°
125 Hz
0°30°
60°
90°
120°
150°±180°
−150°
−120°
−90°
−60°
−30°
250 Hz0°
30°
60°
90°
120°
150°±180°
−150°
−120°
−90°
−60°
−30°
500 Hz
0°30°
60°
90°
120°
150°±180°
−150°
−120°
−90°
−60°
−30°
1 kHz
0°30°
60°
90°
120°
150°±180°
−150°
−120°
−90°
−60°
−30°
2 kHz0°
30°
60°
90°
120°
150°±180°
−150°
−120°
−90°
−60°
−30°
4 kHz
0°30°
60°
90°
120°
150°±180°
−150°
−120°
−90°
−60°
−30°
8 kHz
0°30°
60°
90°
120°
150°±180°
−150°
−120°
−90°
−60°
−30°
16 kHz
Horizontal directivity
Vertical Directivity, 5dB/Div, 50dB Radius, 1/1 Oct.
0°
30°
60°90°
120°
150°
±180°
−150°
−120°−90°
−60°
−30°
63 Hz
0°
30°
60°90°
120°
150°
±180°
−150°
−120°−90°
−60°
−30°
125 Hz
0°
30°
60°90°
120°
150°
±180°
−150°
−120°−90°
−60°
−30°
250 Hz
0°
30°
60°90°
120°
150°
±180°
−150°
−120°−90°
−60°
−30°
500 Hz
0°
30°
60°90°
120°
150°
±180°
−150°
−120°−90°
−60°
−30°
1 kHz
0°
30°
60°90°
120°
150°
±180°
−150°
−120°−90°
−60°
−30°
2 kHz
0°
30°
60°90°
120°
150°
±180°
−150°
−120°−90°
−60°
−30°
4 kHz
0°
30°
60°90°
120°
150°
±180°
−150°
−120°−90°
−60°
−30°
8 kHz
0°
30°
60°90°
120°
150°
±180°
−150°
−120°−90°
−60°
−30°
16 kHz
Vertical directivity
3 | TS 200 Series
-
Dimensions
4 | TS 200 Series
-
Installation/configuration notes
!
Warning!
We expressly point out that the relevant safe-
ty regulations must be observed for “flying”
loudspeaker systems. It is imperative that
qualified expert advice is sought.
!
Warning!
Use of speaker stands
Be sure to observe speaker stands’ maximum
load-bearing capacity. Note that for reasons of
design and construction, most speaker stands
are approved to bear centric loads only; that
is, the speakers’ mass has to be precisely cen-
tered and balanced. Ensure speaker stands
are set up stably and securely. Take appropri-
ate added measures to secure speaker stands,
for example when the floor or ground surface
does not provide a stable, secure base or they
are extended to heights that impede stability
or high wind pressure may be expected or
there is the risk that they may be knocked
over by people or vehicles. Special measures
may become necessary as precautions against
unsafe audience behavior. Do not set up
speaker stands in evacuation routes and
emergency exits. Ensure corridors are wide
enough and put proper barriers and markings
in place when setting speaker stands up in
passageways. Mounting and dismounting are
especially hazardous tasks. Use aids suitable
for this purpose. Always observe the given na-
tional or local regulations when doing so.
Notice!
Consult a certified structural engineer before
any attempt to suspend this loudspeaker!
Loudspeaker can fall from improper suspen-
sion, resulting in severe injury and damage of
property. Do not suspend or mount any other
product or device from this loudspeaker en-
closure! Use grade 5 hardware or better only!
Notice!
This loudspeaker system can permanently
damage hearing! Use extreme care when set-
ting sound pressure levels!
Optional accessories
Tilt adaptor (TA-TS400)
Wall mount kit (WMK-10, black version shown)
5 | TS 200 Series
-
Flying kit (FB-TS400)
TV spigot (FB-TV)
Truss clamp (TC-02)
Truss clamp to TV spigot adaptor (TC-TV)
Carrying bag (SH-TS200)
6 | TS 200 Series
-
System example
VA 215-200 system (2 x TS 200, 2 x PSD 215)
7 | TS 200 Series
-
Ordering information
TS 2002 x 6" / 1" full-range cabinet; aluminum housing;1,200W/300W (peak/RMS); 8 Ω; blackOrder number F.01U.283.237
Accessories
WMK-10Rotatable Wall-Mount-Kit, black; max.10 kgOrder number F.01U.119.022
TA-TS400Tilt adaptor for TS-Series SpeakersOrder number F.01U.267.861
FB-TS400Flying Kit for TS-Series SpeakersOrder number F.01U.267.862
SH-TS200Dust cover/bag for TS 200Order number F.01U.283.243
TC-TVTruss Clamp > TV Spigot 2" Truss AdapterOrder number F.01U.100.727
TC-02Truss clamp 43-50 mmOrder number F.01U.100.657
FB-TVTV Spigot for Flying-Brackets for: PM-TV or TC-TVOrder number F.01U.100.845
TS 200W2 x 6" / 1" full-range cabinet; aluminum housing;1,200W/300W (peak/RMS); 8 Ω; whiteOrder number F.01U.283.238
Accessories
WMK-10WRotatable Wall-Mount-Kit, white, max. 10 kgOrder number F.01U.119.032
TA-TS400Tilt adaptor for TS-Series SpeakersOrder number F.01U.267.861
FB-TS400Flying Kit for TS-Series SpeakersOrder number F.01U.267.862
SH-TS200Dust cover/bag for TS 200Order number F.01U.283.243
TC-TVTruss Clamp > TV Spigot 2" Truss AdapterOrder number F.01U.100.727
TC-02Truss clamp 43-50 mmOrder number F.01U.100.657
FB-TVTV Spigot for Flying-Brackets for: PM-TV or TC-TVOrder number F.01U.100.845
8 | TS 200 Series
Bosch Sicherheitssysteme GmbHRobert-Bosch-Ring 585630 GrasbrunnGermany
www.dynacord.com
© Bosch Sicherheitssysteme GmbH, 2013 | Data subject to change without noticeDocument Number F01U284603 | Vs1 | 05. Sep 2013