Thickness - images02.cdn86.netimages02.cdn86.net/kps01/M00/0B/FB/wKiAiVhjKkbO77... · ASTM D4138,...
2
www. bevsinfo. com . Email:[email protected] Thickness Paint Inspection Gauge(PIG) Introduction : Using Principle : Technical Specification : Cut Angle Range(μm) D Factor(μm) Cutter 45° 63 . 4° 84 . 3° No.1 No.2 No.3 10-900 20-1800 2-180 20 10 2 Standard : ASTM D4138, DIN 50986, ISO 2808 o a b e g a e a p :
Transcript of Thickness - images02.cdn86.netimages02.cdn86.net/kps01/M00/0B/FB/wKiAiVhjKkbO77... · ASTM D4138,...
www.bevsinfo.com . Email:[email protected]
Thickness
Paint Inspection Gauge(PIG)
Introduction:
Using Principle:
Technical Specification:
Cut Angle Range(μm) D Factor(μm)Cutter
45°
63.4°
84.3°
No.1
No.2
No.3
10-900
20-1800
2-180
20
10
2
Standard:
ASTM D4138, DIN 50986, ISO 2808
o ab e ga e a p:
www.bevsinfo.com . Email:[email protected]
Operating Steps:
Order Information:
BEVS 1707 Paint Inspection Gauge
Measurement Principle:
Step Illustration Description
Prepare the inspecting area.
Draw a line with the marker penon the surface.
Cut the coating vertically and make sure it is lacerated.
Read the graduation-scale withthe microscope to attain thickness.
1
2
3
4
Order Information of Accessories:
BEVS 1707 PIG/1 Cutter No.1
BEVS 1707 PIG/2 Cutter No.2
BEVS 1707 PIG/3 Cutter No.3
