Jet Fuel Analysis - gmkakiest.comgmkakiest.com/userfiles/Product/PDF/17.pdf · Jet Fuel Analysis...

Jet Fuel AnalysisLaboratory Instruments for quality control, analysis and calibration

2 t: +44 (0) 1932 564391 | f: +44 (0) 1932 568363 | e: [email protected] | www.stanhope-seta.co.uk

Jet Fuel Analysis

2 t: +44 (0) 1932 564391 | f: +44 (0) 1932 568363 | e: [email protected] | www.seta-analytics.com

• Particle size ISO 11171: 4μm(c) to >70μm(c); ISO 4402: 2μm to >100μm; GOST 17216: 2μm to >200μm

• Cumulative & distributive particle counts

• Cleanliness code reporting

• Uses “Straight from the Bottle” samples

• Precise and reliable results

• Rugged case suitable for laboratory or portable use

• Typical test time of less than 6 minutes

• 16 fixed measuring channels (calibration in compliance with ISO MTD for measuring oil

• An upper and lower limit value can be set for each of the first 8 counting channels

• Data storage for up to 2300 measurements across 64 memories

• Internal Double Pump System downstream of measurement cell

• Optional in-line high pressure testing up to 315 Bar

AvCount2 (SA1000-2)IP 565; ASTM D7619; ASTM D975; Defence Standard (DEF STAN) 91-91 & 91-86

ISO 4406 (1991 & 1999), GOST 17216, NAS 1638, SAE AS4059E, SAE A6D, SAE 749D, GB 5930, GJB 420-1987, GJB 420-A-1996, GJB 420B-2006

• Complete HPLC system allows plug and go for the busy lab

• Precision engineered HPLC hardware with proven technology

• Chromatography assured with optimised column technology meeting the latest ASTM D6379 and IP 436 Method requirements

• Quality separations provide accurate and precise results every time

• Fully compatible to meet and measure Aromatics as referenced in DEF STAN 91-91 Jet Fuel Specifications for Aromatics

• In-line high pressure testing up to 315 Bar

High performance liquid chromatography (HPLC) measuring mono and di-aromatic hydrocarbon content in aviation kerosenes and petroleum distillates.

Evochrom HPLC System - Diesel & Jet Fuel (SA2400-2) ASTM D6379; IP 436

AvCount2 is a laser based particle analyser used for determining the particle concentration in liquid fuels and oils. It can be used throughout distribution networks and in the laboratory, in fact anywhere that requires accurate determination of particle distribution in a liquid sample. Whether checking the quality of fuel, filter systems or in service lubricants, AvCount2 provides fast and precise results.

AvCount uses the light emitted by a laser to illuminate a cell through which the sample is passed. Particles present in the sample cast a shadow onto the sensor within the cell, and as the particle passes across the cell the voltage output of the sensor drops. The voltage drop of the cell is proportional to the particle size and AvCount2 calculates the size of the particle based on this principle.

Results are displayed in real time and are simultaneously printed out on the integral printer. The test methods embedded in AvCount2 cover a range of fuels, lubricating oils and hydraulic fluids and can be edited to create custom test profiles. Versatile connectivity and memory management allow results to be accessed, printed out or downloaded to a memory.

View a demonstration video online www.seta-analytics.com/avcount-movie.htm

APPLICATIONS

• Aviation turbine oils

• Hydraulic and lubricating oils

• Skydrol hydraulic fluid

• Biofuels and biofuel blends

• Heating oil

• Gas oil

• Diesel - automotive and marine

• Gasoline and kerosene

3t: +44 (0) 1932 564391 | f: +44 (0) 1932 568363 | e: [email protected] | www.stanhope-seta.co.uk

Laboratory Instruments for quality control, analysis and calibration

3t: +44 (0) 1932 564391 | f: +44 (0) 1932 568363 | e: [email protected] | www.seta-analytics.com

FIJI FAME in Jet Instrument (SA5000-2)IP 583; ASTM D7767 Determination of the fatty acid methyl esters (FAME) content of aviation turbine fuel (AVTUR) by Fourier Transform Infrared Spectroscopy - Rapid screening method

• All FAME types from C8 to C22 including Coconut, Mustard, Palm, Rapeseed, Sunflower oil, Soya, Jatropha

• Analysis time 20 minutes

• Certified range 20–150 mg/kg FAME in AVTUR

• Laboratory and field instrument

• Fully automatic

• Suitable for untrained operators

• No cleaning solvents required

• No pre-sample preparation required

• 50 ml sample volume

The patented Fame In Jet Instrument (FIJI) has been developed to offer the industry a rapid and easy check on Parts Per Million (ppm or mg/kg) levels of FAME in Aviation fuel using test method IP 583 and ASTM D7767.

FIJI uniquely utilises state of the art FTIR (Fourier Transform Infra-Red Spectroscopy) technology and a patented sample preparation system which allows FAME detection accuracy down to the 20mg/kg level.

FIJI can be used as a field or lab based screening tool to give a quick indication of possible FAME contamination that may then necessitate further investigations. The instrument can be used to prevent expensive testing and avoid costly delays of fuel release.

The FIJI instrument is robust, extremely simple to use and is fully automatic so no specialist operator training is involved. Tests require less than 50ml of sample and typically take under 20 minutes. Results are presented in mg/kg units together with an optional traffic light system for flagging FAME contamination levels of the fuel.

By comparison current analytical tests can take many hours, require complex equipment and demand high skill levels.

Using a unique sample preparation module the sample is pumped at a controlled flow rate though a proprietary disposable cartridge. The sample components are spectrally analysed by the FTIR and a result is displayed in mg/kg and a graphical spectrum is also shown.

The system is self-cleaning so no solvents are required. After each test the cartridge is simply and easily replaced and the instrument is immediately ready for the next sample.

View a demonstration video online www.seta-analytics.com/fiji-movie.htm

Place Cartridge Load Sample Press GO


Jet Fuel Analysis


Setafl ash Series 8 Activecool Closed Cup Tester (Flash/No Flash & Ramp Modes) ASTM D3828; IP 523; IP 524-

Multifl ash Automatic Multi-Method Flash Point TestersABEL; TAG

• Highly automated low cost Modular System with in-built safety

• Strict conformity to test methods

• Fast and reliable performance

• Gas or Electric Ignition

• Temperature in °C or °F

The Seta Multifl ash Universal Base can be used with either an Abel or Tag module to conform precisely to reference test methods.

It comprises a water/air bath, sample cup and lid, temperature probes, fl ash detector, and a DIPS pod (Dipping, Ignition, Pilot, Stirrer) containing the ignitor dipping mechanism with co-axial gas/electric ignitor, and a stirrer (Abel). Interchanging the test module is straightforward and completed in just a few minutes, the base unit recognises that the Abel or Tag module is connected and confi gures standard test parameters.

Setafl ash Series 3 ActiveCool (Rapid Equilibrium And Ramp Tests) ASTM D3828; IP 523; IP 524

• Sub-Ambient Tests and Rapid Cool Down

• Temperature range 10°C to 130°C

• Rapid Equilibrium tests

• Corrosion Resistant option

• 1 Minute Flash / No Flash and Actual Flash Point

• 2/4ml Sample Size

The Setafl ash Series 3 Closed Cup Flash Point Tester is an easy to use instrument that can complete a fl ash/no-fl ash test in less than two minutes and in many cases in 60 seconds, or determine the fl ash point of a sample within a temperature range of 10°C to 130°C.

View a demonstration video online www.stanhope-seta.co.uk/setafl ash.html

30000-0 ➔

34000-0 + 34200-0 ➔

• Flash/no fl ash & ramp mode

• Temperature range of -20°C to 130°C (-4 to 266°F)

• Small sample size, 2 or 4ml

• Corrosion Resistant cup option

• Electric ignitor (with gas option)

• Automatic dipping and fl ash detection

• ActiveCool electronic Peltier cooling

• 64 Test memory & RS232 interface

• °C or °F temperature display

• Barometric pressure correction

The Setafl ash Series 8 ‘ActiveCool’ is an automated closed cup fl ash point tester with a temperature range of 10 to 130°C (50 to 266°F) with no external cooling required. When connected to a suitable chilled water supply, the range is extended down to -20°C (-4°F).

There are two modes of operation; Flash / No Flash and Ramp. The ramp mode increases the sample temperature at a rate of 2°C/min and automatically dips the ignitor every 1°C up to 100°C (every 2°C above 100°C), until either a fl ash is detected or the end of test temperature is reached.

View a demonstration video online www.stanhope-seta.co.uk/setafl ash.html




PMCC Closed Cup Flash Point Tester (35000-0)ASTM D93; ASTM E502; IP 34; IP 35; IP 404 (obs); AASHTO T73-811; BS 2000 Parts 35 & 404 (obs); EN 22719; FTM 791 1102; ISO 15267; ISO 2719;JIS K2265; NF M07-019

• NEW design

• 100% conformance to international test methods

• Easy to operate and fully automatic

• 8.4” Resistive touch screen

• Highly compact footprint

• Seta ‘Ignite’ - robust and long lasting ignition

• Multiple safety features

• Integral fi re extinguisher (factory fi t option)

• 2000 test memory, 30 operator names, 30 test profi les and 30 test methods

The Seta Auto PMCC is a fully automated Pensky-Martens Closed Cup Flash Point Tester which combines strict method conformance with the latest control technology and safety systems to provide the next generation of fl ash point instruments.

An intuitive graphic user interface and 8.4” VGA colour touch screen operation provide unparalleled ease of use with real time display of test progress. Test profi les, operator names, test methods and storage of over 2000 results are provided through the embedded operating system. Test results can be emailed, saved to a memory stick, output to LIMS or produced in hard copy with the printer option.

A robust lid lifting arm provides a single raising or lowering action for loading and removing the test cup. The lid and shutter is integral to the arm and fi tted with a fi re detection probe, fi re extinguishing manifold, ignitor, fl ash detector and sample temperature probe. Stirrer drive, shutter actuator and ignitor dipping mechanism are contained within the arm. Specially designed geometry ensures correct alignment of the lid and shutter to cup, every time.

Ignition source uses an extended life hot wire with gas option. Sample temperature probe is a class A PRT, and fl ash detection is by a thermocouple. Safety features include PRT checks, safety dip before starting, over-temperature cut out, gas shut off , and optional fi re extinguisher. The instrument uses a thermally activated integral CO

2 fi re extinguisher

(factory fi t option) which discharges over the test area, it is driven by a CO

2 cylinder contained within the

instrument and is replaceable by the user.

Rapid turnaround between tests is achieved using a high capacity cooling fan and optimised air fl ow.

Calibration features include sample PRT and barometric pressure sensor with password protected access.


Jet Fuel Analysis


In-Line Conductivity Analysis (99500-0)ASTM D2624

• High-Accuracy AC measurement technology

• Allows precise control & measurement of SDA Additive Injection

• Stainless Steel construction

• Easily fi tted and retracted from the pipeline via a retractable mount

• Can be fi tted to pipes of various diameters

• ATEX, FM, FMc Certifi ed for Zone 1, Hazardous Areas

• 16 Bar pressure or 100 Bar with the High Pressure Unit.

The In-Line Analyser provides a continuous 24/7 highly accurate record of product conductivity levels inside the distribution lines. In-Line conductivity measurement provides signifi cant benefi t to operators by off ering the ability to continuously measure conductivity thereby assuring continuous compliance with conductivity level requirements. It also eliminates the requirement for manual sampling and record keeping.

Process connection types: ANSI, DIN, NPT or BSP.

Handheld Conductivity Meter (99708-0)ASTM D2624; IP 274; DEF STAN 91-91, ASTM D1655

The Seta D2 Hand Held Conductivity Meter (D2 JF-1A-HH model) meets the requirements of ASTM D2624. It provides an accurate and rapid conductivity measurement of distillate fuels; and is specifi cally designed for testing low conductivity fl uids such as such as aviation kerosene, ULSD, home heating fuel, Naphtha, and printing ink.

The Meter can measure fuel electrical conductivities between 0 and 2000 picosiemens/meter (pS/m), although it is optimised and normally used in the 0 to 500 pS/m range.

• Higher Accuracy AC Measurement (± 1.5% of reading)

• Conductivity and temperature output capability

• Measure in any sample container

• No need to relax fuel

• Calibration kit available

• Stores up to 8 Data Locations

• USB interface for ease of data transfer to user

• Fully Temperature Compensated Measurement

Conductivity Calibration & Verifi cation Tool (99714-0)The Calibration & Verifi cation tool fi ts easily onto the tip of the Handheld Conductivity Meter for quick and easy calibration or verifi cation of the instrument. It has one switch to easily alter the range from low value (200 pS/m) to high value (500 pS/m). This allows the user to verify or calibrate conductivity in the fi eld thus eliminating the costly requirement of returning the instrument to the factory.

The tool is optimised for AC conductivity measurement with active components ensuring long term stability and accuracy.




FEATURES

CORROSIONASTM D130-IP 154

Copper Corrosion Bath (11300-2)

• Ambient +5°C to 120°C temperature range

• Copper/Silver corrosion tests

• 2 test stations

• Small footprint

AVIATION FUELCONDITION

SSAFPAK Test Kit (86500-2)Test for:

• Density - ASTM D7777

• Flashpoint - ASTM D3828

• Contamination

• Conductivity - ASTM D2624

• Water Content - Shell Capsule

• Microbial Activity

DISTILLATIONASTM D86; IP 123

Setastill Distillation (11860-3)

• Ambient to 400°C distillation range

• Adjustable height heater/fl ask platform

• Toughened glass window

• Cooling fan

COLOURASTM D156; ASTM D6045

Seta Multi-Colour Automatic Colorimeter (15260-4)

• Automatic operation

• Multiple colour scales including ASTM and Saybolt

• Rapid measurement < 25 seconds

• Objective colour measurement

• RS232 interface

• Integrated remote calibration

MULTI TEST VERIFICATION MATERIALD86-IP 123; EN ISO 3405; IP 170; EN ISO 13736; D2386-IP 16; D1319-IP 156; D1322-IP 57; ISO 1322; D445-IP 71; EN ISO 3104; D3242-IP 354; D3227-IP 342; ISO 3012

Seta MTVM-Kerosene (99850-0)

• Highly cost eff ective solution to Laboratory verifi cation requirements

• Verifi cation to ASTM/CEN/ISO/IP

• Traceable to ISO 9001:2000

• 18 Month Validity

SMOKE POINTASTM D1322; IP 57; IP 598

Seta Smoke Point Apparatus (10400-0)

• Tripod stand, lamp body and chimney

• Viewing window

• Robust construction

FREEZE POINTASTM D2386; IP 16

Seta Freezing Point Apparatus (16990-2)

• Detects solid hydrocarbon crystals

• Reference method

VISCOSITYASTM D445; IP 71

KV2 Viscometer Bath (94710-2)

• Temperature range -40°C to +20°C

• High stability ±0.015 at -20°C, ±0.01 at -40°C

• Accommodates up to 2 standard viscometer tubes

• Backlighting

• Insulated viewing window

CONTAMINATIONASTM D2276; D3830

SSAFCON Sampler (16160-2)

• Filter tests for particle contamination and colour rating of Aviation Fuels

• Eliminates the exposure of fuel during testing

• In-line test - no fuel disposal/waste requirement

• Improves operator safety


Jet Fuel Analysis

8 t: +44 (0) 1932 564391 | f: +44 (0) 1932 568363 | e: [email protected] | www.seta-analytics.com

London Street, Chertsey, Surrey KT16 8AP United Kingdom

Tel: + 44 (0) 1932 564391 Fax: + 44 (0) 1932 568363

Email: [email protected]

www.stanhope-seta.co.uk

Aviation Fuel Specifications, Check List Jet A-1, and Guidance Material;

DEF STAN 91-91 ASTM D1655 AFQRJOS IATA ASTM D7566 (Synthesized Hydrocarbons)

Density ASTM D1298; IP 160 ASTM D1298 ASTM D1298; IP 160 ASTM D1298; IP 160 ASTM D1298; IP 160

Flash Point ASTM D3828, D56;IP 170; IP 523

ASTM D3828, D56; D93 ASTM D3828, D56; IP 170; IP 523

ASTM D3828, D56;IP 170; IP 523

ASTM D3828, D56; IP 170; IP 523

Distillation ASTM D86; IP 123 ASTM D86 ASTM D86; IP 123 ASTM D86; IP 123 ASTM D86; IP 123

Sulfur ASTM D1266; IP 107 ASTM D1266 ASTM D1266 ASTM D1266; IP 107 ASTM D1266

Colour ASTM D156, D6045 ASTM D156, D6045 ASTM D156, D6045

Freezing Point ASTM D2386; IP 16 ASTM D2386 ASTM D2386; IP 16 ASTM D2386; IP 16 ASTM D2386; IP 16

Viscosity ASTM D445; IP 71 ASTM D445 ASTM D445; IP 71 ASTM D445; IP 71 ASTM D445; IP 71

Smoke Point ASTM D1322; IP 57IP 598

ASTM D1322 ASTM D1322; IP 598 ASTM D1322; IP 57 ASTM D1322; IP 57

Corrosion ASTM D130; IP 154 ASTM D130 ASTM D130; IP 154 ASTM D130; IP 154 ASTM D130; IP 154

Existent Gum ASTM D381; IP 540 ASTM D381; IP 540 ASTM D381; IP 540 ASTM D381; IP 540 ASTM D381; IP 540

Aromatics ASTM D1319; IP 156; ASTM D6379; IP 436

ASTM D1319; D6379 ASTM D1319; IP 156; ASTM D6379; IP 436

ASTM D1319; IP 156; ASTM D6379; IP 436

ASTM D1319; IP 156; ASTM D6379; IP 436

Particulates (Counts) IP 565 IP 565

Particulates mg/l (manufacture)

ASTM D5452; IP 423 ASTM D5452 ASTM D5452; IP 423 ASTM D5452; IP 423

Particulates mg/l (delivery) ASTM D2276 ASTM D2276; IP 216 ASTM D2276; IP 216

Conductivity ASTM D2624; IP 274 ASTM D2624 ASTM D2624; IP 274 ASTM D2624; IP 274 ASTM D2624; IP 274

Jet Fuel Analysis - gmkakiest.comgmkakiest.com/userfiles/Product/PDF/17.pdf · Jet Fuel Analysis...

Documents

Transcript of Jet Fuel Analysis - gmkakiest.comgmkakiest.com/userfiles/Product/PDF/17.pdf · Jet Fuel Analysis...