SUPER FAST DIODE MODULE TYPES 70A / 200-600V DO-5(DO …dacosemi.com/proimages/HIGH_POWER_SUPER...
Transcript of SUPER FAST DIODE MODULE TYPES 70A / 200-600V DO-5(DO …dacosemi.com/proimages/HIGH_POWER_SUPER...
RRM
*Pulse Test: Pulse Width 300 sec, Duty Cycle 2%
Electrical Characteristics @ 25 Unless Otherwise SpecifiedIF(AV)
70A TC = 125°C
1000A 8.3ms , half sine
253 Am
www.dacosemi.com.tw
Maximum ReverseRecovery Time
Maximum ThermalResistance JunctionTo Case
R j c 0.63°C/W
High Surge CapabilityTypes up to 600V V
-1-
1.45V
A
μ
Operating Temperature : -55°C to +175°CStorage Temperature : -55°C to +175°C
(Per pkg)
Average ForwardCurrent
Peak Forward SurgeCurrent
Maximum InstantaneousForward Voltage *
75ns75ns90ns
MaximumInstantaneousReverse Current AtRated DC BlockigVoltage*
DACO SEMICONDUCTOR CO., LTD.
Mounting torque Inch pounds(in-pb) 30
Part Number
MaximumRecurrent
Peak ReverseVoltage
MaximumRMS Voltage
Maximum DCBlockingVoltage
MUR7020(R) 200V 140V 200V
MUR7061(R) 600V 420V 600V
MUR7020(R)THRU
MUR7061(R)
200V
600V
1.00V
®
MUR7040(R) 400V 280V 400V
1.30V400V
DO-5(DO -203AB)
Dimensions in mm (1 mm = 0.0394")
200V
600V400V
μ
IFSM
VF
IR
Trr
IFM=70A;TJ = 25°C
TJ = 25°CTJ = 125°C
IF = 0.5A, IR=1.0A,IRR=0.25A
1. R= Stud Reverse Polarity : Anode to Stud 2. None = Stud normal Polarity : Cathode to Stud
Marking Notes :
70A / 200-600VSUPER FAST DIODE MODULE TYPES
Features
Maximum Ratings
15gWeight
1/4-28 UNF
Max.ψ14.96(0.589)
Max.7.00(0.276)
4.45(0.175)3.56(0.140)
Max.11.68
(0.460)
Max.25.91
(1.020)
11.50(0.453)10.72(0.422)
5.08(0.200)2.93(0.115)
Min.6.00(0.236)
May 2020
DACO SEMICONDUCTOR CO.,LTD. MUR7020(R) THRU MUR7061(R)
®
25 0
14
28
42
56
70
84
50 75 100 125 150 175
Figure .2-Forward Derating Curve
Case Temperature - °CInstantaneous Forward Voltage -VoltsVolts
Inst
anta
neou
s F
orw
ard
Cur
rent
- Am
pere
Figure .4 -Typical Reverse Characteristics
Reverse Voltage - Volts (%)
.1
.001
.01
0 10020 40 60 80
1.0
10
1 10040
82 6 10 20 60 8040
8.3ms Single HalfSine Wave JEDEC method TJ = 25°C
200
400
600
800
1000
Figure .3- Peak Forward Surge Current
CyclesNumber Of Cycles At 60Hz - Cycles
1200
Single Phase,Half Wave60Hz Resistive or Inductive Load
mA
Inst
anta
neou
s R
ever
se L
eaka
ge C
urre
nt -
mA
Amp
Peak
For
war
d Su
rge
Cur
rent
- Am
pere
Aver
age
For
war
d R
ectif
ier
Cur
rent
- Am
pere
Amp
0.4 0.6 0.8 1.0 1.21
4
6
10
20
40
60
100
1.4
Figure .1- Typical Forward Characteristics
2
1.6
MU
R70
20
200
1.8
MU
R70
40
MU
R70
61
Amp
Volts
25°C
TJ = 25°C
TJ = 125°C
°C
www.dacosemi.com.tw-2-
8
80
May 2020
Disclaimer
DACO Semiconductor reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein.
DACO Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does DACO Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Purchasers is responsible for its products and applications using DACO Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by DACO Semiconductor. “Typical” parameters which may be provided in DACO Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts.
DACO Semiconductor products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of DACO Semiconductor’s product can reasonably be expected to result in personal injury, death or severe property or environmental damage. DACO Semiconductor accept no liability for inclusion and/or use of DACO Semiconductor’s products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk.
Purchasers buy or use DACO Semiconductor products for any such unintended or unauthorized application, Purchasers shall indemnify and hold DACO Semiconductor and its suppliers and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that DACO Semiconductor was negligent regarding the design or manufacture of the part.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of DACO Semiconductor Co., Ltd.
3
DACO SEMICONDUCTOR CO., LTD. MUR7020(R) THRU MUR7061(R)
May 2020