Sensors 1-1 Photoelectric Switch - · PDF fileSensors 1 1-1 Photoelectric Switch Photo Sensor...

6
Sensors 1 1-1 Photoelectric Switch Photo Sensor (G50 Series) Type Free voltage, Relay contact output Model G50-3C5JC Through beam G50-3B4JC Retroreflective(*1) G50-3A30JC Diffuse Dimensions W18xH50xL50mm Detecting distance 5m 0.1-3.5m 300mm(100x100Non glossy white paper) Detecting target Opaque material of Min. Φ16mm Opaque material of Min.Φ60mm Transpqrent,Translucent;Opaque materials Hysterisis ----------------------- Max.15% at detecting distance Response time Max.20mS Power supply DC10-30V±10%(Ripple P-P:Max10%) Sensitivity ----------------------- Adjustable by VR Operating Selectable Litht ON/D or Dark ON by slide swith Control output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C Protection circuit ----------------------- Protection IP50 (IEC Standard) Material Case:ABSLens cover:AcrylLens:Acryl Cable Φ6.0mm, 5P, Length:2m(Emitter of through-beam type Φ:6.0mm,2P,length:2m) *(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m. Photo Sensor (G50 Series) Type Free voltage, Relay contact output Model G50-2C5JC Through beam G50-2B4JC Retroreflective(*1) G50-2A30JC Diffuse Dimensions W18xH50xL50mm Detecting distance 5m 0.1-3.5m 300mm(100x100Non glossy white paper) Detecting target Opaque material of Min. Φ16mm Opaque material of Min.Φ60mm Transpqrent,Translucent;Opaque materials Hysterisis ----------------------- Max.15% at detecting distance Response time Max.20mS Power supply 90 to 250VAC±10%50/60Hz, Ripple Sensitivity ----------------------- Adjustable by VR Operating Selectable Litht ON/D or Dark ON by slide swith Control output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C Protection circuit ----------------------- Protection IP50 (IEC Standard) Material Case:ABSLens cover:AcrylLens:Acryl Cable Φ6.0mm, 5P, Length:2m(Emitter of through-beam type Φ:6.0mm,2P,length:2m) *(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m. [email protected] Jeenda controls 2008 Specifications and availability subject to change. Dimensions are shown for reference purposes only. www.jeenda.com

Transcript of Sensors 1-1 Photoelectric Switch - · PDF fileSensors 1 1-1 Photoelectric Switch Photo Sensor...

Page 1: Sensors 1-1 Photoelectric Switch - · PDF fileSensors 1 1-1 Photoelectric Switch Photo Sensor (G50 Series) Type Free voltage, Relay contact output Model G50-3C5JC Through beam G50-3B4JC

Sensors

1

1-1

Photoelectric Switch

Photo Sensor (G50 Series)Type Free voltage, Relay contact outputModel G50-3C5JC Through beam G50-3B4JC Retroreflective(*1) G50-3A30JC DiffuseDimensions W18xH50xL50mm

Detecting distance 5m 0.1-3.5m 300mm(100x100Non glossy white paper)Detecting target Opaque material of Min.

Φ16mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.15% at detecting distanceResponse time Max.20mSPower supply DC10-30V±10%(Ripple P-P:Max10%)Sensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Protection circuit -----------------------Protection IP50 (IEC Standard)Material Case:ABS、Lens cover:Acryl、Lens:AcrylCable Φ6.0mm, 5P, Length:2m(Emitter of through-beam type Φ:6.0mm,2P,length:2m)

*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.

Photo Sensor (G50 Series)Type Free voltage, Relay contact outputModel G50-2C5JC Through beam G50-2B4JC Retroreflective(*1) G50-2A30JC DiffuseDimensions W18xH50xL50mm

Detecting distance 5m 0.1-3.5m 300mm(100x100Non glossy white paper)Detecting target Opaque material of Min.

Φ16mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.15% at detecting distanceResponse time Max.20mSPower supply 90 to 250VAC±10%50/60Hz, RippleSensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Protection circuit -----------------------Protection IP50 (IEC Standard)Material Case:ABS、Lens cover:Acryl、Lens:AcrylCable Φ6.0mm, 5P, Length:2m(Emitter of through-beam type Φ:6.0mm,2P,length:2m)

*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.

[email protected]

Jeenda controls 2008Specifications and availability subject to change. Dimensions are shown for reference purposes only.

www.jeenda.com

Page 2: Sensors 1-1 Photoelectric Switch - · PDF fileSensors 1 1-1 Photoelectric Switch Photo Sensor (G50 Series) Type Free voltage, Relay contact output Model G50-3C5JC Through beam G50-3B4JC

1

1-2

Photoelectric Switch

Photo Sensor (G50 Series)Type Free voltage, Relay contact outputModel G50-4C5JC Through beam G50-4B4JC Retroreflective(*1) G50-4A30JC DiffuseDimensions W18xH50xL50mm

Detecting distance 5m 0.1-3.5m 300mm(100x100Non glossy white paper)Detecting target Opaque material of Min.

Φ16mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.15% at detecting distanceResponse time Max.20mSPower supply 24 to 240VAC±10%50/60Hz, 24 to 240VAC±10%(Ripple P-P: Max10%)Sensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Protection circuit -----------------------Protection IP54 (IEC Standard)Material Case:ABS、Lens cover:Acryl、Lens:AcrylCable Φ6.0mm, 5P, Length:2m(Emitter of through-beam type Φ:6.0mm,2P,length:2m)

*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.

Photo Sensor (G74 Series)Type Free voltage, Relay contact outputModel G74-3C7JC Through beam G74-3B4JC Retroreflective(*1) G74-3A70JC DiffuseDimensions W25xH65xL75mm

Detecting distance 7m 0.1-3.5m 700mm(200x200Non glossy white paper)Detecting target Opaque material of Min.

Φ15mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.20% at detecting distanceResponse time Max.20mSPower supplySensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Self-diagnosticOutpue

Green LED turns on at unstable operation

Timer function ON Delay,OFF Delay,Selectable one shot delay by slide swith Delay Time:0.1 to 5sec adjustable by VR

Protection IP48(IEC Standard)

Sensors

[email protected]

Jeenda controls 2008Specifications and availability subject to change. Dimensions are shown for reference purposes only.

www.jeenda.com

Page 3: Sensors 1-1 Photoelectric Switch - · PDF fileSensors 1 1-1 Photoelectric Switch Photo Sensor (G50 Series) Type Free voltage, Relay contact output Model G50-3C5JC Through beam G50-3B4JC

Sensors

1

1-3

Photoelectric Switch

Photo Sensor (G74 Series)Type Free voltage, Relay contact outputModel G74-2C7JC Through beam G74-2B4JC Retroreflective(*1) G74-2A70JC DiffuseDimensions W25xH65xL75mm

Detecting distance 7m 0.1-3.5m 700mm(200x200Non glossy white paper)Detecting target Opaque material of Min.

Φ15mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.20% at detecting distanceResponse time Max.20mSPower supplySensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Self-diagnosticOutpue

Green LED turns on at unstable operation

Timer function ON Delay,OFF Delay,Selectable one shot delay by slide swith Delay Time:0.1 to 5sec adjustable by VR

Protection IP48(IEC Standard)

Photo Sensor (G74 Series)Type Free voltage, Relay contact outputModel G740-4C75JC Through beam G74-4B4JC Retroreflective(*1) G74-4A70JC DiffuseDimensions W25xH65xL75mm

Detecting distance 7m 0.1-3.5m 700mm(200x200Non glossy white paper)Detecting target Opaque material of Min.

Φ15mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.20% at detecting distanceResponse time Max.20mSPower supply 24 to 240VAC±10%50/60Hz, 24 to 240VAC±10%(Ripple P-P: Max10%)Sensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Self-diagnosticOutpue

Green LED turns on at unstable operation

Timer function ON Delay,OFF Delay,Selectable one shot delay by slide swith Delay Time:0.1 to 5sec adjustable by VR

Protection IP54(IEC Standard)

[email protected]

Jeenda controls 2008Specifications and availability subject to change. Dimensions are shown for reference purposes only.

www.jeenda.com

Page 4: Sensors 1-1 Photoelectric Switch - · PDF fileSensors 1 1-1 Photoelectric Switch Photo Sensor (G50 Series) Type Free voltage, Relay contact output Model G50-3C5JC Through beam G50-3B4JC

1

1-4

Photoelectric Switch

Photo Sensor (BEN Series)Type Free voltage, Relay contact outputModel BEN10M-TDR Through beam BEN5M-MDR Retroreflective(*1) BEN500-DDR DiffuseDimensions W18xH50xL50mm

Detecting distance 10m 0.1-5m 500mm(100x100Non glossy white paper)Detecting target Opaque material of Min.

Φ16mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.15% at detecting distanceResponse time Max.20mSPower supplySensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Protection circuit -----------------------Protection IP50(IEC Standard)Material Case:ABS、Lens cover:Acryl、Lens:AcrylCable Φ6.0mm, 5P, Length:2m(Emitter of through-beam type Φ:6.0mm,2P,length:2m)

*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.

Photo Sensor (BEN Series)Type Free voltage, Relay contact outputModel BEN10M-TAR Through beam BEN5M-MAR Retroreflective(*1) BEN500-DAR DiffuseDimensions W18xH50xL50mm

Detecting distance 10m 0.1-5m 500mm(100x100Non glossy white paper)Detecting target Opaque material of Min.

Φ16mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.15% at detecting distanceResponse time Max.20mSPower supplySensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Protection circuit -----------------------Protection IP50(IEC Standard)Material Case:ABS、Lens cover:Acryl、Lens:AcrylCable Φ6.0mm, 5P, Length:2m(Emitter of through-beam type Φ:6.0mm,2P,length:2m)

*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.

Sensors

[email protected]

Jeenda controls 2008Specifications and availability subject to change. Dimensions are shown for reference purposes only.

www.jeenda.com

Page 5: Sensors 1-1 Photoelectric Switch - · PDF fileSensors 1 1-1 Photoelectric Switch Photo Sensor (G50 Series) Type Free voltage, Relay contact output Model G50-3C5JC Through beam G50-3B4JC

Sensors

1

1-5

Photoelectric Switch

Photo Sensor (BEN Series)Type Free voltage, Relay contact outputModel BEN10M-TFR Through beam BEN5M-MFR Retroreflective(*1) BEN500-DFR DiffuseDimensions W18xH50xL50mm

Detecting distance 10m 0.1-5m 500mm(100x100Non glossy white paper)Detecting target Opaque material of Min.

Φ16mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.15% at detecting distanceResponse time Max.20mSPower supply 24 to 240VAC±10%50/60Hz, 24 to 240VAC±10%(Ripple P-P: Max10%)Sensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Protection circuit -----------------------Protection IP54(IEC Standard)Material Case:ABS、Lens cover:Acryl、Lens:AcrylCable Φ6.0mm, 5P, Length:2m(Emitter of through-beam type Φ:6.0mm,2P,length:2m)

*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.

Photo Sensor (BX Series)Type Free voltage, Relay contact outputModel BX15M-TDR Through beam BX5M-MDR Retroreflective(*1) BX700-DDR DiffuseDimensions W25xH67xL81mm

Detecting distance 15m 0.1-5m 700mm(200x200Non glossy white paper)Detecting target Opaque material of Min.

Φ15mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.20% at detecting distanceResponse time Max.20mSPower supply 10 to 30VDC±10%(Ripple P-P: Max10%)Sensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Self-diagnosticOutpue

Green LED turns on at unstable operation

Timer function ON Delay,OFF Delay,Selectable one shot delay by slide swith Delay Time:0.1 to 5sec adjustable by VR

Protection IP48(IEC Standard)

[email protected]

Jeenda controls 2008Specifications and availability subject to change. Dimensions are shown for reference purposes only.

www.jeenda.com

Page 6: Sensors 1-1 Photoelectric Switch - · PDF fileSensors 1 1-1 Photoelectric Switch Photo Sensor (G50 Series) Type Free voltage, Relay contact output Model G50-3C5JC Through beam G50-3B4JC

1

1-6

Photoelectric Switch

Photo Sensor (BX Series)Type Free voltage, Relay contact outputModel BX15M-TAR Through beam BX5M-MAR Retroreflective(*1) BX700-DAR DiffuseDimensions W25xH67xL81mm

Detecting distance 15m 0.1-5m 700mm(200x200Non glossy white paper)Detecting target Opaque material of Min.

Φ15mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.20% at detecting distanceResponse time Max.20mSPower supply AC90-250V±10%50/60HzSensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Self-diagnosticOutpue

Green LED turns on at unstable operation

Timer function ON Delay,OFF Delay,Selectable one shot delay by slide swith Delay Time:0.1 to 5sec adjustable by VR

Protection IP48(IEC Standard)

Photo Sensor (BX Series)Type Free voltage, Relay contact outputModel BX15M-TFR Through beam BX5M-MFR Retroreflective(*1) BX700-DFR DiffuseDimensions W25xH67xL81mm

Detecting distance 15m 0.1-5m 700mm(200x200Non glossy white paper)Detecting target Opaque material of Min.

Φ15mmOpaque material of Min.Φ60mm

Transpqrent,Translucent;Opaque materials

Hysterisis ----------------------- Max.20% at detecting distanceResponse time Max.20mSPower supply 24 to 240VAC±10%50/60Hz, 24 to 240VAC±10%(Ripple P-P: Max10%)Sensitivity ----------------------- Adjustable by VROperating Selectable Litht ON/D or Dark ON by slide swithControl output Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load

Contact orde:1C

Self-diagnosticOutpue

Green LED turns on at unstable operation

Timer function ON Delay,OFF Delay,Selectable one shot delay by slide swith Delay Time:0.1 to 5sec adjustable by VR

Protection IP54(IEC Standard)

Sensors

[email protected]

Jeenda controls 2008Specifications and availability subject to change. Dimensions are shown for reference purposes only.

www.jeenda.com