Model : MI0220VT-1 - Display · PDF filemodel : mi0220vt-1 lcd module specification ... rev...

of 23 /23
Model : MI0220VT-1 LCD MODULE SPECIFICATION Revision 1.1 Engineering Date 2010-09-28 Our Reference MULTI-INNO TECHNOLOGY CO., LTD. www.multi-inno.com Approved Comment For Customer's Acceptance: Customer

Embed Size (px)

Transcript of Model : MI0220VT-1 - Display · PDF filemodel : mi0220vt-1 lcd module specification ... rev...

  • Model : MI0220VT-1

    LCD MODULE SPECIFICATION

    Revision 1.1

    Engineering

    Date 2010-09-28

    Our Reference

    MULTI-INNO TECHNOLOGY CO., LTD.

    www.multi-inno.com

    Approved

    Comment

    For Customer's Acceptance:

    Customer

  • REVISION RECORD

    REV NO. REV DATE CONTENTS REMARKS

    1.0 2010-8-26 First release

    1.1 2010-9-28 Full spec

    P.2 MULTI-INNO TECHNOLOGY CO.,LTD.

    MODULE NO.: MI0220VT-1 Ver 1.1

  • CONTENTS

    GENERAL INFORMATION EXTERNAL DIMENSIONS ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS BACKLIGHT CHARACTERISTICS ELECTRO-OPTICAL CHARACTERISTICS INTERFACE DESCRIPTION REFERENCE APPLICATION CIRCUIT RELIABILITY TEST CONDITIONS INSPECTION CRITERION PRECAUTIONS FOR USING LCD MODULES PACKING SPECIFICATION PRIOR CONSULT MATTER

    P.3 MULTI-INNO TECHNOLOGY CO.,LTD.

    MODULE NO.: MI0220VT-1 Ver 1.1

  • GENERAL INFORMATION

    Item of general information Contents Unit LCD type TFT/TRANSMISSIVE / Recommended Viewing Direction 6:00 O Clock

    Module area (W H T) 50.3445.012.20 mm3 Viewing area (WH) 46.2435.08 mm2 Active area (WH) 44.6433.48 mm2 Number of Dots 320RGB240 / Pixel pitch (W H) 0.13950.1395 mm2 Driver IC S6D04K1X / Interface Type MPU/SPI+RGB / Input voltage 2.8 V Module Power consumption 231 mw Colors 262K /

    P.4 MULTI-INNO TECHNOLOGY CO.,LTD.

    MODULE NO.: MI0220VT-1 Ver 1.1

    Backlight Type 4 LEDs /

    Gray scale inversion direction 12:00 O Clock

    Weight TBD g Note 1:Viewing direction for best image quality is different from TFT definition, there is a 180 degree shift. Note 2 : RoHS compliant;Note 3: LCM weight tolerance: 5% .

  • EXTERNAL DIMENSIONS

    K4

    AK

    0.30

    (eye)

    3.BA

    CKLI

    GHT:4

    CHIP-

    WHITE

    LED,

    Paral

    lel

    conne

    ction

    NOTE

    S

    2. D

    ISPL

    AY MO

    DE :

    262K

    Color

    LCD,

    Tra

    nsmis

    sive,

    Norma

    l Whi

    te

    1. DR

    IVE I

    C : S

    6D04

    K1X

    4.O

    PERAT

    ING T

    EMPER

    ATUR

    E:

    -20

    C TO

    70

    CSTO

    RAGE

    TEMP

    ERATU

    RE:

    -30

    C T

    O 80

    C

    6.G

    ENERA

    L TOL

    ERAN

    CE :

    0.2

    LEDA

    LEDK

    1

    LEDK

    2

    LED K

    3

    LEDK

    4

    P.5

    MULTI-INNO TECHNOLOGY CO.,LTD.

    MODULE NO.: MI0220VT-1 Ver 1.1

    5.RoHS COMPLIANT.

  • ABSOLUTE MAXIMUM RATINGS

    Parameter of absolute maximum ratings Symbol Min Max Unit

    Supply voltage for logic VCC/IOVCC -0.3 5.0 V Input voltage VIN -0.3 IOVCC+0.5 V Operating temperature Top -20 70 C Storage temperature TST -30 80 C Humidity RH - 90%(Max60 C) RH ELECTRICAL CHARACTERISTICS DC CHARACTERISTICS

    Parameter of DC characteristics Symbol Min Typ Max Unit

    Supply voltage for logic VCC 2.4 2.8 3.3 V I/O power supply IOVCC 1.65 1.8/2.8 3.3 V Input Current Idd - 8.12 16.24 mA Input voltage 'H' level VIH 0.7IOVCC - IOVCC V Input voltage 'L' level VIL 0 - 0.3IOVCC V Output voltage 'H' level VOH 0.8IOVCC - IOVCC V Output voltage 'L' level VOL 0 - 0.2IOVCC V BACKLIGHT CHARACTERISTICS

    Item of backlight characteristics Symbol Min. Typ. Max. Unit Condition

    Forward voltage Vf 2.9 3.1 3.3 V If=60mA Luminance Lv 4700 5200 5700 cd/m2 Ta=25 Number of LED - - 4 - Piece - Connection mode P - Parallel - - - Using condition: constant current driving method If=60mA (+/-10%).

    P.6 MULTI-INNO TECHNOLOGY CO.,LTD.

    MODULE NO.: MI0220VT-1 Ver 1.1

  • ELECTRO-OPTICAL CHARACTERISTICS

    Item of electro-optical characteristics

    Symbol Condition Min Typ Max Unit Remark Note

    Response time Tr+ Tf - 23 35 ms Fig.1 4 Contrast ratio Cr 300 733 - --- FIG 2. 1 Luminance uniformity WHITE 74 82 - % FIG 2. 3

    Surface Luminance Lv

    =0 =0 Ta=25

    196 245 - cd/m2 FIG 2. 2

    = 90 70 80 - deg FIG 3. = 270 70 80 - deg FIG 3. = 0 70 80 - deg FIG 3.

    Viewing angle range

    = 180 70 80 - deg FIG 3.

    6

    Red x 0.5608 0.6108 0.6608 - Red y 0.2949 0.3449 0.3949 - Green x 0.2732 0.3232 0.3732 - Green y 0.5320 0.5820 0.6320 - Blue x 0.0936 0.1436 0.1936 - Blue y 0.0126 0.0626 0.1126 - White x 0.2333 0.2933 0.3533 -

    CIE (x, y) chromaticity

    White y

    =0 =0 Ta=25

    0.2507 0.3107 0.3707 -

    FIG 2. 5

    Note1. Contrast Ratio(CR) is defined mathematically by the following formula. For more

    information see FIG 2.:

    ( )( )

    AverageSurface Luminance with all white pixels P 1, P2, P 3, P4, P5 ContrastRatio =

    Average SurfaceLuminance with all black pixels P1, P2, P 3, P4, P5

    Note2. Surface luminance is the LCD surface from the surface with all pixels displaying white. For more information see FIG 2.

    Lv = Average Surface Luminance with all white pixels (P1, P2, P 3,P4, P5) Note3. The uniformity in surface luminance WHITE is determined by measuring luminance at

    each test position 1 through 5, and then dividing the maximum luminance of 5 points luminance by minimum luminance of 5 points luminance. For more information see FIG 2.

    , ,

    Surface Luminance with all white pixels ( , , , ) WHITE =

    Maxi Surface Luminance with allwhite pixels ( , , , ) 1 2 3 4 5

    1 2 3 4 5

    Minimum P P P P Pmum P P P P P

    Note4. Response time is the time required for the display to transition from White to black(Rise Time, Tr) and from black to white(Decay Time, Tf). For additional information see FIG 1..

    Note5. CIE (x, y) chromaticity ,The x,y value is determined by screen active area position 5. For more information see FIG 2.

    Note6. Viewing angle is the angle at which the contrast ratio is greater than 2. For TFT module the conrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG 3.

    Note7. For Viewing angle and response time testing, the testing data is base on Autronic-Melcherss ConoScope. Series Instruments. For contrast ratio, Surface Luminance, Luminance uniformity and CIE the testing data is base on TOPCONs BM-5 photo detector.

    Note8. For TFT transmissive module,Gray scale reverse occurs in the direction of panel viewing angle.

    P.7 MULTI-INNO TECHNOLOGY CO.,LTD.

    MODULE NO.: MI0220VT-1 Ver 1.1

  • FIG.1. The definition of Response Time

    FIG.2. Measuring method for Contrast ratio,surface luminance, Luminance uniformity,CIE (x,

    y) chromaticity

    FIG.3. The definition of viewing angle

    A : 5 mm B : 5 mm H,V : Active Area Light spot size =5mm, 500mm distance from the LCD surface to detector lens measurement instrument is TOPCONs luminance meter BM-5

    P.8 MULTI-INNO TECHNOLOGY CO.,LTD.

    MODULE NO.: MI0220VT-1 Ver 1.1

  • INTERFACE DESCRIPTION Interface

    NO. Symbol I/O or

    connect to Description When not in

    use 1 YU(NC) - No connection - 2 XL(NC) - No connection - 3 YD(NC) - No connection - 4 XR(NC) - No connection - 5 GND Power supply Power Ground -

    6 IOVCC Power supply Low voltage power supply for interface logic circuits (1.65 ~3.3 V) -

    7 VCC Power supply High voltage power supply for analog circuit blocks (2.4~3.3 V) -

    8 PWM_OUT O Host processor

    Output pin for PWM(Pulse Width Modulation) signal of LED driving. OPEN

    9 FMARK O Host processor

    Tearing effect output pin to synchronize MPU to frame writing, activated by S/W command. When this pin is not activated, this pin is low.

    OPEN

    10 RESET I Host processor

    This signal will reset the device and must be applied to properly initialize the chip. Signal is active low.

    -

    11 DB0 GND 12 DB1 GND 13 DB2 GND 14 DB3 GND 15 DB4 GND 16 DB5 GND 17 DB6 GND 18 DB7 GND 19 DB8 GND 20 DB9 GND 21 DB10 GND 22 DB11 GND 23 DB12 GND 24 DB13 GND 25 DB14 GND 26 DB15 GND 27 DB16 GND 28 DB17

    I/O Host Processor

    When RGB I/F, DB[17:0] are used to RGB interface data bus.When MPU I/F, DB[17:0] are used to MPU parallel interface data bus.

    GND

    29 CSX I Host Processor

    Chip select input pin (Low enable). This pin can be permanently fixed Low in MPU interface mode only.

    -

    30 RSX I Host Processor

    This pin is used to select Data or Command in the parallel interface or 4-wire 8-bit serial data interface. When DCX = 1, data is selected. When DCX = 0, command is selected. This pin is used serial interface clock in 3-wire 9-bit/4-wire 8-bit serial data interface.

    GND/IOVCC

    P.9

    MULTI-INNO TECHNOLOGY CO.,LTD.

    MODULE NO.: MI0220VT-1 Ver 1.1

  • 31 WRX I Host Processor

    This pin is used to Write Clock in 80-series parallel interface.This pin is used to select Read / Write Operation in 68-series parallel interface. This pin is used as DCX when 4-wire 8-bit serial data interface.

    GND/IOVCC

    32 RDX I Host Processor

    This pin is used to Read Clock in 80-series parallel interface.This pin is used to Read / Write Clock in 68-series parallel interface.

    IOVCC

    33 DSI_VCC - Dummy pin. Leave these pads open. -

    34 DSI_DON - Dummy pin. Leave these pads open. -

    35 DSI_DOP - Dummy pin. Leave these pads open. -

    36 DSI_CLKN - Dummy pin. Leave these pads open. -

    37 DSI_CLKP - Dummy pin. Leave these pads open. -

    38 DE I Host Processor Data enable signal in RGB I/F mode. GND/IOVCC

    39 PCLK I Host