OWNER’S MANUAL

78

Exploded view:

Part listNO. Description Qty

1 Foam gripΦ21*7*1000 12 Handle pulse 23 Washer d6*Φ12*1 24 Screw ST4*19*Φ7 25 Middle handlebar 16 Screw M8*38*15*S6 47 End capΦ22*16 28 Handle pulse wire 19 Nut M8*H7.5*S13 6

10L/R Handle bar(L/R) 211 Foam grip Φ30*5*630 212 Arc washer d8*Φ20*2*R16 1213 End cap Φ32*46*Φ50 214 Bolt M8*40*20*H3 4

15 L/R Cover for left swing rod 216 Bolt M8*16*S14 217 Spring washer d8 218 Washer d8*Φ32* 1.5 219 Alloy wrap 2Φ32*3*Φ28*21*Φ19.4 820 Wave washer d19*Φ25*0.3 421 Long spacer Φ32*Φ19.2*75.5 2

22L/R Swing rod (L/R) 223 Spacer Φ14*Φ8.3*59 224 Alloy wrap 1 32*3*Φ28*16*Φ14.3 425 Handlebar post 126 Arc washer d8*Φ20*2*R30 1027 Screw M8*16*S6 628 Seal Φ61*Φ87.5*8.8 129 Front cover 130 Tension wire L800 131 Inductor 132 Screw M5*50 1

NO. Description Qty

33 Arc washer d5*Φ20*1*R30 134 Screw M5*10*Φ12 235 Trunk wire 136 Tension control 137 Computer 1

38L/R Cover for right swing rod 239 Screw ST3*10*Φ5.6 240 Nut M8*H16*S13 841 End cap J60*30*15 242 Washer d8*Φ16*1.5 243 Screw ST4.2*19*Φ8 444 Bolt M8*75*13*S14 2

45L/R Connecting rod 246L/R Front cover for right connecting rod 2

47 Knob M8*Φ60*30 448 Bolt M8*45*20*S14 4

49L/R Pedal 82*160*60 250L/R Rear cover for right connecting rod 2

51 Nut M10*1.25*H9.5*S17 252 Washer d10*Φ32 *2.0 253 Screw ST3*16*Φ5.6 654 Short spacer Φ32*Φ19.2*30 255 Main frame 1

56L/R Front cover for left connecting rod 257L/R Rear cover for left connecting rod 2

58 Bolt M8*73*20*H5 459 Front stabilizer 160 End cap Φ60*Φ70*95 261 Rear stabilizer 162 End cap Φ60*45.5*74.5*74.5 263 Spanner S6 164 Wrench S13-14 165 Wrench S13-14-15-17 inner S10 1

STEP1:

Assembly steps

a. Secure front stabilizer (59) and rear stabilizer (61) to main frame (55) with bolt (58), arc washer (26) and nut (40).

STEP 2:

a. Insert seal (28) and front cover (29) into handlebar post (25);b. Connect trunk wire (35) with inductor (31); and connect tension control (36) with tension

wire (30);c. Secure handlebar post (25) to main frame (55) with screw (27) and arc washer (26).d. Attach seal (28) and front cover (29).

STEP 3:

a. Insert swing rod (22L/R) into handlebar post (25), then secure swing rod (22L/R) to the axle of handlebar post (25) with bolt (16), spring washer (17) and washer (18);

b. Secure handle bar (10L/R) to swing rod (22L/R) with bolt (14), arc washer (12) and nut (9).

STEP 4:

a. Secure connecting rod (45L/R) to the crank axle of main frame (55) with nut (51) and washer (52);

b. Secure swing rod (22L/R) to connecting rod (45L/R) with bolt (44), washer (42) and nut (9);c. Secure pedal (49L/R) to connecting rod (45L/R) with bolt (48) and knob (47).

STEP 5:

a. Attach cover for left swing rod (15L/R) and cover for right swing rod (38L/R) into swing rod (22L/R);

b. Secure front cover for left connecting rod (56L/R) and front cover for right connecting rod (46L/R) to connecting rod (45L/R) with screw (43);

c. Secure rear cover for left connecting rod (57L/R) and rear cover for right connecting rod (50L/R) to connecting rod (45L/R) with screw (53).

STEP 6:

a. Secure middle handlebar (5) to handlebar post (25) with screw (6), arc washer (12) and nut (40);

STEP 7:

a. Connect the link wire of computer (37) with trunk wire (35), then secure computer (37) to handlebar post (25) with screw (34);

b. Insert handle pulse wire (8) into the hole on the back of computer (37). The assembly is finished.