Intelligent, Efficient, Inline Pumping GRUNDFOS TPE3
2
KEY FEATURES AND BENEFITS • Plug-and-pump with features like built-in temperature and pressure sensors, which eliminate the need for additional sensors in most cases • Intelligent control modes simplify the optimization of pump performance using temperature, pressure and flow to deliver unrivaled efficiency automatically • Differential temperature can control system performance based on ΔT with just one additional temperature sensor • Proportional pressure adjusts pressure when the setpoint is known, to match flow to actual demand and decrease energy consumption with integrated sensor • AUTOADAPT controls proportional pressure even when the setpoint is unknown in order to maximize efficiency • FLOWADAPT monitors flow and ensures that the flow rate never exceeds the FLOWLIMIT value, eliminating the need for a pump balancing valve • Advanced permanent magnet motor offers an additional 7-10% decrease in energy cost over NEMA Premium, operating at IE5—the world’s highest efficiency rating • Wireless communication allows connection of up to four single TPE3 pumps, enabling cascade control for wider range and greater efficiency • Easy BMS integration available with snap-in CIM modules that follow LON, Profibus, Modbus, SMS/GSM/GPRS and BACnet standards and provide over 30 points of data and control using single poll functionality • I/O package includes multiple replays and inputs for accurate system monitoring and optimal pump regulation The Grundfos TPE3 joins the Grundfos commercial products line as not only the smartest inline pump, but also one of the easiest to use. The TPE3 offers increased flow and pressure, as well as breakthrough efficiency, in a plug- and-pump design. With features that simplify installation, commissioning, operation and maintenance, the TPE3 is a logical choice for almost any commercial heating and cooling application. Adaptive control modes, integrated sensors, hassle- free communication capabilities and an ultra-efficient permanent magnet motor combine to provide simplified, intelligent pumping that can save you up to 85% in energy consumption compared to a typical circulator. Intelligent, Efficient, Inline Pumping GRUNDFOS TPE3 • Heat energy monitor is built-in to provide system performance data and to help avoid system imbalance • High quality user interface provides simple setup, commissioning and monitoring on TFT color display • Cataphoresis surface treatment protects against corrosion, while the same treatment inside the pump keeps efficiency high • Siliconcarbide shaft seal is Grundfos-designed and manufactured for reliability • Available materials: • Cast Iron – Standard for single and dual pumps • Stainless Steel – Single pumps ONLY APPLICATIONS • Hydronic Heating and Cooling — Single-pipe Heating Systems — Primary / Secondary — Heat Recovery Systems — Distributed Pumping — District Energy Systems • Boiler Bypass Pumps • Domestic Hot Water Recirculation
Transcript of Intelligent, Efficient, Inline Pumping GRUNDFOS TPE3
KEY FEATURES AND BENEFITS
• Plug-and-pump with features like built-in temperature and pressure sensors, which eliminate the need for additional sensors in most cases
• Intelligent control modes simplify the optimization of pump performance using temperature, pressure and flow to deliver unrivaled efficiency automatically
• Differential temperature can control system performance based on ΔT with just one additional temperature sensor
• Proportional pressure adjusts pressure when the setpoint is known, to match flow to actual demand and decrease energy consumption with integrated sensor
• AUTOADAPT controls proportional pressure even when the setpoint is unknown in order to maximize efficiency
• FLOWADAPT monitors flow and ensures that the flow rate never exceeds the FLOWLIMIT value, eliminating the need for a pump balancing valve
• Advanced permanent magnet motor offers an additional 7-10% decrease in energy cost over NEMA Premium, operating at IE5—the world’s highest efficiency rating
• Wireless communication allows connection of up to four single TPE3 pumps, enabling cascade control for wider range and greater efficiency
• Easy BMS integration available with snap-in CIM modules that follow LON, Profibus, Modbus, SMS/GSM/GPRS and BACnet standards and provide over 30 points of data and control using single poll functionality
• I/O package includes multiple replays and inputs for accurate system monitoring and optimal pump regulation
The Grundfos TPE3 joins the Grundfos commercial products line as not only the smartest inline pump, but also one of the easiest to use. The TPE3 offers increased flow and pressure, as well as breakthrough efficiency, in a plug-and-pump design.
With features that simplify installation, commissioning, operation and maintenance, the TPE3 is a logical choice for almost any commercial heating and cooling application. Adaptive control modes, integrated sensors, hassle-free communication capabilities and an ultra-efficient permanent magnet motor combine to provide simplified, intelligent pumping that can save you up to 85% in energy consumption compared to a typical circulator.
Intelligent, Efficient, Inline Pumping
GRUNDFOS TPE3
• Heat energy monitor is built-in to provide system performance data and to help avoid system imbalance
• High quality user interface provides simple setup, commissioning and monitoring on TFT color display
• Cataphoresis surface treatment protects against corrosion, while the same treatment inside the pump keeps efficiency high
• Siliconcarbide shaft seal is Grundfos-designed and manufactured for reliability
• Available materials:• Cast Iron – Standard for single and dual pumps• Stainless Steel – Single pumps ONLY
APPLICATIONS
• Hydronic Heating and Cooling — Single-pipe Heating Systems — Primary / Secondary — Heat Recovery Systems — Distributed Pumping — District Energy Systems
• Boiler Bypass Pumps • Domestic Hot Water Recirculation
LTPE
SL01
012
1
TECHNICAL DATA
PERFORMANCE DATA
TPE3 (Single and Dual Head Models)
FLOW, Q: max. 500 gpm (114 m³/h)
HEAD, H: max. 80 ft (24 m)
MOTOR: 1/60/200–240V 3/60/200–240V 3/60/440–480V
WORKING PRESSURE: max. 232 psi
LIQUID TEMPERATURE: -13°F to 248°F
AMBIENT TEMPERATURE: 1/60/200–240V AND 3/60/440–480V: -4 °F to 122 °F 3/60/200–240V: -4 °F to 104 °F
APPROVALS: NSF372 (Stainless Steel ONLY)
Trad
emar
ks d
ispl
ayed
in th
is m
ater
ial,
incl
udin
g bu
t not
lim
ited
to G
rund
fos,
the
Gru
ndfo
s log
o an
d “b
e th
ink
inno
vate
” are
regi
ster
ed tr
adem
arks
ow
ned
by T
he G
rund
fos G
roup
. All
right
s res
erve
d. ©
202
0 G
rund
fos H
oldi
ng A
/S, a
ll rig
hts r
eser
ved.
Grundfos AmericasBrookshire, TX 77423
www.grundfos.uswww.grundfos.cawww.grundfos.mx
Visit grundfos.us/pei to learn more about Department of Energy (DOE) pump energy index (PEI) requirements and PEI ratings on specific Grundfos models.
40-240
40-200
40-180
40-150
40-120
40-80 50-80
80-150
80-110
50-200
50-240
65-15050-150
65-120
65-80
80-120
80-180
80-40
65-180
65-150
65-120
65-80
80-40
80-110
80-120
80-150
65-200
80-180
TPE3
TPE3D
![MEMS Fabrication Laboratory Report - University of …hork0004/ME8254microbrewery.doc · Web viewSurface/Channel Acoustic Wave Pump [7] External Rotation Centrifugal Pumping [20]](https://static.fdocument.org/doc/165x107/5b2b45137f8b9a45198b6334/mems-fabrication-laboratory-report-university-of-hork0004-web-viewsurfacechannel.jpg)
