F-type - Vidarf Inc. · 2017. 1. 2. · [email protected] / 2 F-type Connectors CHARACTERISTICS...

6
1 VidaRF Product Guide F-type Connectors

Transcript of F-type - Vidarf Inc. · 2017. 1. 2. · [email protected] / 2 F-type Connectors CHARACTERISTICS...

Page 1: F-type - Vidarf Inc. · 2017. 1. 2. · Sales@vidaRF.com / 2 F-type Connectors CHARACTERISTICS Requirements Specifications Applicable standards Interface according to IEC 60169-24

1 VidaRF Product Guide

F-typeConnectors

Page 2: F-type - Vidarf Inc. · 2017. 1. 2. · Sales@vidaRF.com / 2 F-type Connectors CHARACTERISTICS Requirements Specifications Applicable standards Interface according to IEC 60169-24

[email protected] / www.vidaRF.com 2

F-type Connectors

CHARACTERISTICSSpecificationsRequirements

Applicable standards

Interface according to IEC 60169-24

Quality tested according to IEC 61169

Electrical data

Impedance 75 Ω

Frequency range DC to 4 GHz

Return loss (cable connector straight) ≥ 20 dB (typ.)

Insertion loss ≤ 0.1 x √f(GHz) dB

Insulation resistance ≥ 5 GΩ

Center contact resistance ≤ 10 mΩ

Outer contact resistance ≤ 1 mΩ

Test voltage 1500 V rms

Working voltage 500 V rms

Mechanical data

Mating cycles ≥ 500

Coupling test torque 6.78 Nm

Coupling torque recommended 1.70 Nm to 2.26 Nm

Environmental data

Temperature range -40 °C to +85 °C

Thermal shock IEC 61169-1, Sub-clause 9.4.4

Corrosion resistance IEC 61169-1, Sub-clause 9.4.6

Moisture resistance IEC 61169-1, Sub-clause 9.4.3

Vibration IEC 61169-1, Sub-clause 9.3.3

Shock IEC 61169-1, Sub-clause 9.3.14

Max. soldering temperature (PCB connectors) IEC 61760-1, +260 °C for 10 sec.

Materials

Spring loaded contact parts CuBe, Au plating

Center contact CuZn, Au plating

Outer contact CuZn, Au / Ni plating

Crimping ferrule Copper alloy, Ni plating

Dielectric PTFE

Gasket Rubber

Page 3: F-type - Vidarf Inc. · 2017. 1. 2. · Sales@vidaRF.com / 2 F-type Connectors CHARACTERISTICS Requirements Specifications Applicable standards Interface according to IEC 60169-24

3 VidaRF Product Guide

Interface Dimensions

* resilient, dimension to meet electrical and mechanical requirements

Screw-on coaxial connectors with high electrical and mechanical stability, for CATV, MATV and satellite TV applications, especially for test & measurement applications up to 4 GHz

FeaturesInterface according to IEC 60169-24Frequency range DC to 4 GHzRetum loss (cable connector straight) ≥ 20 dB (typ.)Impedance 75ΩScrew-on coupling

Connectors are available on request

F-type Connectors

Page 4: F-type - Vidarf Inc. · 2017. 1. 2. · Sales@vidaRF.com / 2 F-type Connectors CHARACTERISTICS Requirements Specifications Applicable standards Interface according to IEC 60169-24

[email protected] / www.vidaRF.com 4

Straight Plug for RG59

Right Angle Plug for RG179

Straight Plug for RG179

Right Angle Plug for UT085

Straight Plug for UT141

Straight Jack for UT141

Straight Plug for UT085

Straight Jack for UT085

Part No.

F-111-003

Part No.

F-301-001

Part No.

F-115-001

Part No.

F-311-001

Part No.

F-101-001

Part No.

F-201-001

Part No.

F-102-001

Part No.

F-202-001

F-type Connectors

Page 5: F-type - Vidarf Inc. · 2017. 1. 2. · Sales@vidaRF.com / 2 F-type Connectors CHARACTERISTICS Requirements Specifications Applicable standards Interface according to IEC 60169-24

5 VidaRF Product Guide

Bulkhead Side-PCB JackPanel Receptacle Jack-4Hole

Bulkhead Jack for UT085Panel Jack-4Hole for UT085

Right Angle Bulkhead PCB Jack

Part No.

F-504-001

Part No.

F-604-001

Part No.

F-401-003

Part No.

F-608-003

Part No.

F-401-004

F-type Connectors

Page 6: F-type - Vidarf Inc. · 2017. 1. 2. · Sales@vidaRF.com / 2 F-type Connectors CHARACTERISTICS Requirements Specifications Applicable standards Interface according to IEC 60169-24