Dimensions (unit : mm) 172Wdatasheet.octopart.com/9WG5748P5H001-Sanyo-Denki-datasheet...mm ×51 mm...
Transcript of Dimensions (unit : mm) 172Wdatasheet.octopart.com/9WG5748P5H001-Sanyo-Denki-datasheet...mm ×51 mm...
-
172m
m
17
20.
8
162
0.5
1500.8
7.50.47.50.4510.8
8-4.50.3
10
+30300 0
Rotating Direction Airflow Direction
Lead WireAWG22UL1430
55.555.5
Inlet Side, Outlet Side
4-4.5
55.5
162
0.5
17
2 16
8
147
55.5
9.5
Note2)
172mm51mm
48 40.8 to 55.2 10 to70
1000
1000
2.910.211.620.21
140.010.178.010.1
8,6002,0006,5002,000
15.463.59
11.603.59
546127410127
1000 75.1
770 75.1
4.020.303.090.30
78407140
9WG5748P5G001
9WG5748P5H001
40,000/60(70,000/40)
Sp
lash
Pro
of
Fan
172
mm
Features
Specifications
Common Specifications Material Life Expectancy
Motor Protection System Dielectric Strength Sound Pressure Level (SPL) Operating Temperature Storage Temperature Lead Wire Mass
Frame: Aluminum, Impeller: Plastics (Flammability: UL94V-1)
Varies for each model
(L10: Survival rate: 90% at 60, rated voltage, and continuously run in a free air state)Current blocking function and Reverse polarity protection
50/60 Hz, 500VAC, 1 minute (between lead conductor and frame)
Expressed as the value at 1m from air inlet side
Varies for each model (Non-condensing)
30 to 70 Non-Condensing
redblackSensor: yellow Control: brownApprox. 860g
CATALOG No. C1001B001 11.04
1-15-1, Kita-otsuka, Toshima-ku,Tokyo 170-8451, Japan. PHONE :+ 81 3 3917 5151 Home Page:http//www.sanyodenki.co.jp
The products shown in the catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited.To protect against electrolytic corrosion that may occur in locations with strong electromagnetic noise, we provide fans that are unaffected by electrolytic corrosion.
Notice
Dimensions (unit : mm)
Reference dimension of mounting holes and vent opening (unit : mm)
Model No. Rated Voltage[V]
Operating Voltage Range
[V]
Rated Current[A]
Rated Input[W]
Air Flow[m3/min] [CFM] [Pa] [inchH2O] [dB(A)] [] [h]
Static Pressure SPLRated Speed[min-1]
Operating Temperature
Life Expectancy
Splash proof and dust resistant
Protection class IP55* water and dust resistant performance.Maintains safe operation even in harsh environments.
IP55is a protection specification for protection against water sprays and dust.It is based on IEC (International Electrotechnical Commission) and JIS (Japanese Industrial Standards) and specified as follows.Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment;complete protection against contact. Water projected in jets against the enclosure from any direction shall have no harmful effect.
Large air flow and high static pressure
Maximum airflow : 15.46m3/min Maximum static pressure : 1000Pa
Note1 : PWM Frequency25kHzNote2: Expected life at 40 degreeC ambient is just reference value.
PWMDuty Cycle%Note1)
172W
-
0
1200
800
400
PaDC 48V
inch H2O
CFM
m3/min
200
1000
600
5 10 15 20
0%
PWM Duty Cycle100%
50%
0
1200
800
400
PaPWM Duty Cycle 100
inch H2O
CFM
m3/min
200
1000
600
5 10
40.8V
48V
55.2V
15 20
DC 48VPainch H2O
CFM
m3/min0 155 10
700
600
900
800
500
400
300
200
100 0%
PWM Duty Cycle100%
50%
PWM Duty Cycle 100Painch H2O
CFM
m3/min0 155 10
700
600
900
800
500
400
300
200
100
40.8V/48V/55.2V
9WG5748P5G001 9WG5748P5G001
9WG5748P5H001 9WG5748P5H001
9WG5748P5H0019WG5748P5G001
0 100
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000 8,600min-1
2,000min-1
0 100
2,000min-1
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
6,500min-1
T
T1
VIL
VIHT 100T1
T1
172mm51mm
PWM Duty Cycle Operating Voltage Range
Air Flow and Static Pressure Characteristics
Sta
tic
Pre
ssu
re
Air Flow
S
tati
c P
ress
ure
Air Flow
S
tati
c P
ress
ure
Air Flow
S
tati
c P
ress
ure
Air Flow
PWM Duty - Speed Characteristics Example
Voltage48V DCPWM Frequency25kHz
Voltage48V DCPWM Frequency25kHz
PWM Duty Cycle%
Sp
eed
min
-1
PWM Duty Cycle%
Sp
eed
min
-1
Input Signal Wave Form VIH=4.75V to 5.25V
VIL=0V to 0.4V
PWM Duty Cycle%=
PWM Frequency 25kHz=
Source CurrentIsource : 1mA Max. at control voltage 0V
Sink CurrentIsink : 1mA Max. at control voltage 5.25V
Control Terminal Voltage : 5.25V Max. (Open Circuit)
When the control lead wire is open,speed is same as one at 100% PWM duty cycle.
This fan speed should be controlled by PWM input signal of either TTL input or open collector, drain input.
PWM Input Signal Example
Isource
Isink
Control
Connection Schematic
PWM Input Signal
DC fan input voltage Inside of DC fan
T0
T1
0V
VOL
VOH
T2 T3 T4
T141/4T0
T141/4T060/4Nsec
NFan speedmin-1One revolution
In case of steady running
VCE72V MAX.Ic10mA MAX.VOLVCESAT0.6V MAX.
Ic10mA MAX.
72V MAX.
Output circuit : Open collector
Specifications for Pulse Sensors
Output waveform Need pull-up resistor
Inside of DC fan
Sensor output
Pull-up resistorSensor
172W
1.0
0
2.0
3.0
4.0
5.0
1000 200 300 400 500 600 700
1.0
0
2.0
3.0
4.0
5.0
1000 200 300 400 500 600 700
0 100 200 300 400 500 0 100 200 300 400 500
2.0
1.0
3.0
0
2.0
1.0
3.0
0
-
0
1200
800
400
PaDC 48V
inch H2O
CFM
m3/min
200
1000
600
5 10 15 20
0%
PWM Duty Cycle100%
50%
0
1200
800
400
PaPWM Duty Cycle 100
inch H2O
CFM
m3/min
200
1000
600
5 10
40.8V
48V
55.2V
15 20
DC 48VPainch H2O
CFM
m3/min0 155 10
700
600
900
800
500
400
300
200
100 0%
PWM Duty Cycle100%
50%
PWM Duty Cycle 100Painch H2O
CFM
m3/min0 155 10
700
600
900
800
500
400
300
200
100
40.8V/48V/55.2V
9WG5748P5G001 9WG5748P5G001
9WG5748P5H001 9WG5748P5H001
9WG5748P5H0019WG5748P5G001
0 100
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000 8,600min-1
2,000min-1
0 100
2,000min-1
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
6,500min-1
T
T1
VIL
VIHT 100T1
T1
172mm51mm
PWM Duty Cycle Operating Voltage Range
Air Flow and Static Pressure Characteristics
S
tati
c P
ress
ure
Air Flow
S
tati
c P
ress
ure
Air Flow
S
tati
c P
ress
ure
Air Flow
S
tati
c P
ress
ure
Air Flow
PWM Duty - Speed Characteristics Example
Voltage48V DCPWM Frequency25kHz
Voltage48V DCPWM Frequency25kHz
PWM Duty Cycle%
Sp
eed
min
-1
PWM Duty Cycle%
Sp
eed
min
-1
Input Signal Wave Form VIH=4.75V to 5.25V
VIL=0V to 0.4V
PWM Duty Cycle%=
PWM Frequency 25kHz=
Source CurrentIsource : 1mA Max. at control voltage 0V
Sink CurrentIsink : 1mA Max. at control voltage 5.25V
Control Terminal Voltage : 5.25V Max. (Open Circuit)
When the control lead wire is open,speed is same as one at 100% PWM duty cycle.
This fan speed should be controlled by PWM input signal of either TTL input or open collector, drain input.
PWM Input Signal Example
Isource
Isink
Control
Connection Schematic
PWM Input Signal
DC fan input voltage Inside of DC fan
T0
T1
0V
VOL
VOH
T2 T3 T4
T141/4T0
T141/4T060/4Nsec
NFan speedmin-1One revolution
In case of steady running
VCE72V MAX.Ic10mA MAX.VOLVCESAT0.6V MAX.
Ic10mA MAX.
72V MAX.
Output circuit : Open collector
Specifications for Pulse Sensors
Output waveform Need pull-up resistor
Inside of DC fan
Sensor output
Pull-up resistorSensor
172W
1.0
0
2.0
3.0
4.0
5.0
1000 200 300 400 500 600 700
1.0
0
2.0
3.0
4.0
5.0
1000 200 300 400 500 600 700
0 100 200 300 400 500 0 100 200 300 400 500
2.0
1.0
3.0
0
2.0
1.0
3.0
0
-
172m
m
17
20.
8
162
0.5
1500.8
7.50.47.50.4510.8
8-4.50.3
10
+30300 0
Rotating Direction Airflow Direction
Lead WireAWG22UL1430
55.555.5
Inlet Side, Outlet Side
4-4.5
55.5
162
0.5
17
2 16
8
147
55.5
9.5
Note2)
172mm51mm
48 40.8 to 55.2 10 to70
1000
1000
2.910.211.620.21
140.010.178.010.1
8,6002,0006,5002,000
15.463.59
11.603.59
546127410127
1000 75.1
770 75.1
4.020.303.090.30
78407140
9WG5748P5G001
9WG5748P5H001
40,000/60(70,000/40)
Sp
lash
Pro
of
Fan
172
mm
Features
Specifications
Common Specifications Material Life Expectancy
Motor Protection System Dielectric Strength Sound Pressure Level (SPL) Operating Temperature Storage Temperature Lead Wire Mass
Frame: Aluminum, Impeller: Plastics (Flammability: UL94V-1)
Varies for each model
(L10: Survival rate: 90% at 60, rated voltage, and continuously run in a free air state)Current blocking function and Reverse polarity protection
50/60 Hz, 500VAC, 1 minute (between lead conductor and frame)
Expressed as the value at 1m from air inlet side
Varies for each model (Non-condensing)
30 to 70 Non-Condensing
redblackSensor: yellow Control: brownApprox. 860g
CATALOG No. C1001B001 11.04
1-15-1, Kita-otsuka, Toshima-ku,Tokyo 170-8451, Japan. PHONE :+ 81 3 3917 5151 Home Page:http//www.sanyodenki.co.jp
The products shown in the catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited.To protect against electrolytic corrosion that may occur in locations with strong electromagnetic noise, we provide fans that are unaffected by electrolytic corrosion.
Notice
Dimensions (unit : mm)
Reference dimension of mounting holes and vent opening (unit : mm)
Model No. Rated Voltage[V]
Operating Voltage Range
[V]
Rated Current[A]
Rated Input[W]
Air Flow[m3/min] [CFM] [Pa] [inchH2O] [dB(A)] [] [h]
Static Pressure SPLRated Speed[min-1]
Operating Temperature
Life Expectancy
Splash proof and dust resistant
Protection class IP55* water and dust resistant performance.Maintains safe operation even in harsh environments.
IP55is a protection specification for protection against water sprays and dust.It is based on IEC (International Electrotechnical Commission) and JIS (Japanese Industrial Standards) and specified as follows.Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment;complete protection against contact. Water projected in jets against the enclosure from any direction shall have no harmful effect.
Large air flow and high static pressure
Maximum airflow : 15.46m3/min Maximum static pressure : 1000Pa
Note1 : PWM Frequency25kHzNote2: Expected life at 40 degreeC ambient is just reference value.
PWMDuty Cycle%Note1)
172W