Compact Vibration Generator & Matched Power Amplifier · 2018. 5. 7. · vibration generator can be...

12

(190)

(19.5)

107

63.5

120 100

M6

216

※Trunnion Stand(Option)

4-Ｍ4,Depth:6（Helisert）

φ30

Ｍ6,Depth:8.5（Insert）

150

φ40


370

φ79

220

M6,Depth:12（Insert）

φ4.8ThroughHole

M10

Collet Chuck

(31)

816(55)

12-φ10 on both sides

270

147

Armature table φ50 φ190 (15)

φ8ThroughHole

224.5

4560

80

234283

45°

φ62

4-Ｍ4,Depth:12（Insert）

φ215

9514-AB/AW

φ150

175

277

250

289.5

φ120

φ50φ100

340442

13-M6,Depth:12（Helisert）

45°

Σ9515 Series

φ340

360

511-A 512 Series

513 Series

9514-AN/MD

9514-AN/SD　9514-AB/SD　9514-AB/WF

9514-AN/AS　9514-AB/AS　

511-A 512 Series

513 Series

9514-AN/MD

9514-AN/SD　9514-AB/SD　9514-AB/WF

9514-AN/AS　9514-AB/AS　Armature table

φ75 φ190 (15)

234283(302.6)

276

227.5

147

φ60φ35

45°

13-M5,Depth:10

Armature tableφ75

234283

224.5

270

147

φ190 (15)

φ60φ35

45°

13-M5,Depth:10

Armature table φ83

382.5φ318.5

129

φ80.5205

9-M5,Depth:10

φ6045°

Notes

NOV-2014CL-159-01-E

http://www.emic-net.co.jp/

□ Quality Management System ISO 9001□ Enviromental Management System ISO 14001We achieve the above certifications.

Scope of Application　　ISO 14001 ： Mishima Factory

Head Office

Chubu Sales Office

Osaka Sales Office

Mishima Factory

Shanghai Office

THAI EMIC CO., LTD.

27-3 Nishigotanda 2-chome Shinagawa-ku Tokyo 141-0031, JapanTEL : (03)3494-1221, FAX : (03)-3494-1288Mizunami Creation Park, 2020 Yamada-machi Mizunami-city Gifu 509-6104, JapanTEL : (0572)26-8585, FAX : (0572)26-9283Hanahara 5th Bldg., 6Fl., 8-17 Nishinakajima 7-chome Yodogawa-ku Osaka 532-0011, JapanTEL : (06)6886-0451, FAX : (06)6886-045411 Heiseidai Mishima-city Shizuoka 411-0042, JapanTEL : (055)988-8411, FAX : (055)988-2223

Room 904, Building A, Oriental Financial Plaza No. 1168 Century Avenue, Pudong, Shanghai 200122, PR ChinaTEL : +86-021-5081-5604, FAX : +86-021-3429-3502Glas Haus Building 11 Floor, Unit No.1101/4 1 Soi Sukhumvit 25 (Daengprasert), Sukhumvit Road, Wattana, Bangkok 10110TEL : +66(0)2260-0246, FAX : +66(0)2260-0248

for Modal Excitation & Analysis, Calibration, Reliability Test, etc. for Modal Excitation & Analysis, Calibration, Reliability Test, etc.

Compact Vibration Generator & Matched Power Amplifier






Compact Vibration Generator Outline Drawing

Sound-proof Box for Rattle Noise Test

The ability to generate a vibration up to 24 kHz or 30 kHz can exactly perform the modal analysis and transfer function measurement over the wide frequency range of various structures' dynamic behavior.

The acceleration, velocity and displacement can be controlled at any desired frequency, therefore, the vibration generator can be used for the calibration of various vibration measuring instruments and transducers.

The vibration generator can be used as excitation source to measure the mechanical impedance of a structure. To cover many different structures we also offer a high force model (max. 500 N) and high frequency model (max. 30 kHz).

The vibration generators are most suitable for a reliability test of small parts such as electronic parts, circuit boards, moreover, for many applications, tests of various sensors such as car acceleration sensors, gyro sensors and functional tests of precision mechanical systems. The combined environmental reliability tests can be accomplished together with an environmental chamber.

The vibration generator can be integrated into a production line as a vibration test system of car audio products and GPS navigation systems.

Structure Analysis & Transfer Function Measurement

Calibration of Vibrometer

Mechanical Impedance Measurement Many applications

Inspection Equipment in Production Line Ｓｕｐｅｒ High Frequency Excitation Source




Inspection Equipment in Production Line Ｓｕｐｅｒ High Frequency Excitation SourceWe also offer the EM-772 that can generate a extremely high frequency vibration up to 60 kHz to measure the frequency characteristics such as spurious characteristics of the crystal oscillator mounted on suspension-head unit in hard disk drives, mobile-phone and smart phone.

System Configuration

Charge Amplifier

Piezo-electricAccelerometerVertical Table

Collet-and-Chuckfor Modal Analysis

Slip Table

Vibrometer Data Recorder(Recommended : GRAPHTEC Model)

Environmental Chamber (limited to only all-wheather type)

Accelerometerwith Electronics

Isolation Stud

Power Amplifier

Blower

Isolation Mat

High-speed Video Camera (Recommended : PhotronModel)

Reaction Mass

Signal Generator

Vibration ControllerDCS-98000MJ Series(Please contact us forthe details.)

EMIC Model(Option)

Other Model(Option)

Compact High-Performance Vibration Generator

9514 SeriesCompact Vibration Generator

New 9514 series of vibration generator that provides

the flexibility to comply with various applications.

While its essential parts are standardized, the most

suited configuration can be realized for various

applications such as heavy load, through hole,

heat-proof, etc.. And its greater flexibility makes it

possible to comply with the examination of the rattle

noise. Combining with various peripheral equipment

can meet many requirements.

ApplicationThe wide variety of 9514-based application can be accomplished to customer's test requirements. We can offer the various test systems.

Rattle Noise (Very Low Abnormal Noise) Measuring Evaluation Test SystemUsed for measuring and evaluating very low abnormal noise (rattle noise) from audio equipment such as CD, DVD player, etc. mainly used for car audio systems. The system consists of a vibration controller and sound-proof box to deaden ambient noise as well as compact vibration generator and associated power amplifier.

The compact vibration generator is used for calibration of a vibrometer, measurement of mechanical

impedance, excitation source for modal analysis and reliability test of a small light specimen. In

particular, we use the world's first ceramic armature for the 512-D and 513-D vibration generator,

making it possible to excite up to high frequency of 30 kHz (513-D can excite up to 24 kHz).

Standard 9514

Pneumatic Payload SupportEnhancement of Payload CapabilityAdjustment of Center Operating Position

Modal Analysis Heat-proof (All-weather) FeatureCan be used in environmental chamber.

Horizontal Slip Table + Reinforcement against Offset LoadThe figure shows the add-on features,horizontal slip table with linear bearingand reinforcement against offset load in vertical vibration mode. The table size can be changed according to the customer's needs.

11 2

Sound-proof Box for Rattle Noise Test

The ability to generate a vibration up to 24 kHz or 30 kHz can exactly perform the modal analysis and transfer function measurement over the wide frequency range of various structures' dynamic behavior.

The acceleration, velocity and displacement can be controlled at any desired frequency, therefore, the vibration generator can be used for the calibration of various vibration measuring instruments and transducers.

The vibration generator can be used as excitation source to measure the mechanical impedance of a structure. To cover many different structures we also offer a high force model (max. 500 N) and high frequency model (max. 30 kHz).

The vibration generators are most suitable for a reliability test of small parts such as electronic parts, circuit boards, moreover, for many applications, tests of various sensors such as car acceleration sensors, gyro sensors and functional tests of precision mechanical systems. The combined environmental reliability tests can be accomplished together with an environmental chamber.

The vibration generator can be integrated into a production line as a vibration test system of car audio products and GPS navigation systems.




Inspection Equipment in Production Line Ｓｕｐｅｒ High Frequency Excitation Source




Inspection Equipment in Production Line Ｓｕｐｅｒ High Frequency Excitation SourceWe also offer the EM-772 that can generate a extremely high frequency vibration up to 60 kHz to measure the frequency characteristics such as spurious characteristics of the crystal oscillator mounted on suspension-head unit in hard disk drives, mobile-phone and smart phone.

System Configuration

Charge Amplifier

Piezo-electricAccelerometerVertical Table

Collet-and-Chuckfor Modal Analysis

Slip Table

Vibrometer Data Recorder(Recommended : GRAPHTEC Model)

Environmental Chamber (limited to only all-wheather type)

Accelerometerwith Electronics

Isolation Stud

Power Amplifier

Blower

Isolation Mat

High-speed Video Camera (Recommended : PhotronModel)

Reaction Mass

Signal Generator

Vibration ControllerDCS-98000MJ Series(Please contact us forthe details.)

EMIC Model(Option)

Other Model(Option)

Compact High-Performance Vibration Generator

9514 SeriesCompact Vibration Generator

New 9514 series of vibration generator that provides

the flexibility to comply with various applications.

While its essential parts are standardized, the most

suited configuration can be realized for various

applications such as heavy load, through hole,

heat-proof, etc.. And its greater flexibility makes it

possible to comply with the examination of the rattle

noise. Combining with various peripheral equipment

can meet many requirements.

ApplicationThe wide variety of 9514-based application can be accomplished to customer's test requirements. We can offer the various test systems.

Rattle Noise (Very Low Abnormal Noise) Measuring Evaluation Test SystemUsed for measuring and evaluating very low abnormal noise (rattle noise) from audio equipment such as CD, DVD player, etc. mainly used for car audio systems. The system consists of a vibration controller and sound-proof box to deaden ambient noise as well as compact vibration generator and associated power amplifier.

The compact vibration generator is used for calibration of a vibrometer, measurement of mechanical

impedance, excitation source for modal analysis and reliability test of a small light specimen. In

particular, we use the world's first ceramic armature for the 512-D and 513-D vibration generator,

making it possible to excite up to high frequency of 30 kHz (513-D can excite up to 24 kHz).

Compact Vibration Generator

Standard 9514

Pneumatic Payload SupportEnhancement of Payload CapabilityAdjustment of Center Operating Position

Modal Analysis Heat-proof (All-weather) FeatureCan be used in environmental chamber.

Horizontal Slip Table + Reinforcement against Offset LoadThe figure shows the add-on features,horizontal slip table with linear bearingand reinforcement against offset load in vertical vibration mode. The table size can be changed according to the customer's needs.

11 2

Note : Photo is for illustrative purposes only. Specifications subject to change without prior notice.



（Shown with Trunnion Stand Option）（Shown with Trunnion Stand Option）


(※1) Except for grip. (※2) 25 mmp-p displacement is available by changing axial stiffness to 15 N.mm. (※3) At 50 mm above table center. (※4) When attempting to drive the vibration generator at its maximum exciting force, vibration generator should be secured to reaction mass, rigid base or floor. (※5) Without any projection.

513 Series

511、512 Series 9514 Series

9514 Series, Modal & All-weather Application

Modal Analysis

511-A15N

2 Hz to 5 kHz

230.7m/s2

1.26m/s

5.0mmp-pMore than 3.9 kHz

0.065kg

Aluminum

5N/mm

M6 Screw (length=20mm)

-

-

Permanent Magnet

－10 ℃ to ＋40 ℃(Without dew drop)

Natural

120W×190H×100Dmm

4.2kg

371-A

-

Trunnion Stand

-

Standard

512 -A49N

2 Hz to 20 kHz

376.9m/s2

1.14m/s

7.0mmp-pMore than 16 kHz

0.13kg

Magnesium

12N/mmф40mm2.0kg

-

Permanent Magnet


Naturalф150ｍｍ×178mm（※1）

9.5kg

371-A

-

-

Trunnion Stand(Weight=2.4 kg)

High Force : 64 N

512-A/A64N

2 Hz to 20 kHz

492.3m/s2

1.31m/s


0.13kg

Magnesium

12N/mmф40mm2.0kg

-

Permanent Magnet


Forced Airф150ｍｍ×178mm（※1）

9.5kg

372-A

Standard Accessory

-


High Frequency : 30 kHz

512-D49N

2 Hz to 30 kHz

272.2m/s2

1.00m/s


0.18kg

Ceramics

12N/mmф40mm2.0kg

-

Permanent Magnet



9.5kg

371-A

-

-


High Frequency : 30 kHzHigh Force : 64 N

512-D/A64N

2 Hz to 30 kHz

355.5m/s2

1.14m/s


0.18kg

Ceramics

12N/mmф40mm2.0kg

-

Permanent Magnet



9.5kg

372-A

Standard Accessory

-


Standard

513-B98N

3 Hz to 13 kHz

264.8m/s2

1.17m/s

10mmp-pMore than 12 kHz

0.37kg

Magnesium

14.0N/mmф79mm3.0kg

-

Permanent Magnet


Naturalф215W×230H（※1）

26kg

371-A

-

Interconnecting Cable x 1Grip x 2


High Force : 147 N & 196 N

513-B/A

3 Hz to 13 kHz


0.37kg

Magnesium

14.0N/mmф79mm3.0kg

-

Permanent Magnet


Forced Airф215W×230H（※1）

26kg

Standard Accessory




513-D98N

3 Hz to 24 kHz

175m/s2

0.92m/s


0.56kg

Ceramics

14.0N/mmф79mm3.0kg

-

Permanent Magnet



26kg

372-A

-




513-D/A147N

3 Hz to 24 kHz

262.5m/s2

1.14m/s


0.56kg

Ceramics

14.0N/mmф79mm3.0kg

-

Permanent Magnet



26kg

374-A

Standard Accessory



147N 196N

1.43m/s

372-A 374-A

397.2m/s2

1.67m/s

529.7m/s2

Standard

9514-AN/SD300N

5 Hz to 5 kHz250m/s2

1.2m/s15mmp-p（※2）

More than 4350 Hz1.2kg

AluminumHalf Loop FlexureSleeve Shaft25.0N/mm（※2）ф75mm12kgVertical

Less than 3 mT（※3）Permanent Magnet

－10 ℃ to ＋40 ℃(Without dew drop)Natural

283W×270H×205Dmm25kg

Model : 373-A--

■Accelerometer　■Reaction Mass （※4）■Isolation (Rubber) Pad


High Force : 500 N

9514-AB/SD500N

5 Hz to 5 kHz416.7m/s2

1.2m/s25mmp-p


AluminumHalf Loop FlexureSleeve Shaft25.0N/mmф75mm12kgVertical


－10 ℃ to ＋40 ℃(Without dew drop)Forced Air (Blower)

283W×270H×205Dmm26kg

Model : 375-DStandard Accessory

Provided

Integrated Pneumatic SupportLarge Displacement : 30mmp-p

9514-AN/AS300N


1.2m/s30mmp-p


AluminumPneumatic Payload SupportRoller Bearing ＋ Sleeve Shaft

-ф75mm12kg

Vertical（※3）Less than 3 mT（※3）Permanent Magnet


283W×276H×205Dmm27kg

Model : 373-A―

●Air Pump　●Midpoint Adjuster Block■Accelerometer　■Reaction Mass （※4）■Isolation (Rubber) Pad

Integrated Pneumatic SupportLarge Displacement : 30 mmp-p High Force : 500 N

9514-AB/AS500N


1.2m/s30mmp-p



-ф75mm12kg



283W×276H×205Dmm27kg


―■Accelerometer　■Reaction Mass （※4）■Isolation (Rubber) Pad

Category

ModelMax. Exciting ForceFrequency RangeMax. AccelerationMax. VelocityMax. DisplacementAxial ResonanceMoving ElementArmature StructureAxial StiffnessArmature DiameterMaximum PayloadStray FieldField Power

Working AmbientTemp. Range

CoolingDimensionsWeightMatched AmplifierBlower

Accessory

Option

Category



CoolingDimensionsWeightMatched AmplifierBlowerAccessory

Option

Category

ModelMax. Exciting ForceFrequency RangeMax. AccelerationMax. VelocityMax. DisplacementAxial ResonanceMoving ElementArmature StructureSuspension & GuideAxial StiffnessArmature DiameterMaximum PayloadThrust AxisStray FieldField PowerAmbient Temp.CoolingDimensionsWeightMatched AmplifierBlowerAccessory

Option

Category

ModelMax. Exciting ForceFrequency RangeMax. AccelerationMax. VelocityMax. DisplacementAxial ResonanceMoving ElementArmature StructureSuspension & GuideAxial StiffnessArmature DiameterMaximum PayloadThrust AxisStray FieldField PowerAmbient Temp.CoolingDimensions（※5）WeightMatched Amplifier

Blower

Accessory

Option

Category




Accessory

Option

Category




Option

Category


Option

Category


Blower

Accessory

Option

Category


Blower

Accessory

Option

Category


Blower

Accessory

Option

Modal Excitation

9514-AN/MD300N

5 Hz to 2.5 kHz300m/s2

1.2m/s15mmp-p


AluminumHalf Loop FlexureSleeve Shaft25.0N/mmф50mm8.0kg

Vertical（Any direction by using flexure）Less than 3 mT（※3）Permanent Magnet


283W×270H×205Dmm26kg

Model : 373-A

―

Collet-and-chuck Set (φ1.0, φ1.5, φ2.0, φ2.35, φ3.0) ■Accelerometer　■Reaction Mass (※4)■Isolation (Rubber) Pad■Model : 9514-AN/MD/Z12　Reinforced Stiffness : 50 N/mm (limited to max. 10 mmp-p)■Model : 9514-AN/MD/Z13　Low level acceleration with low　distortion (limited to max. 10 mmp-p)

■Accelerometer■Isolation (Rubber) Pad

■ Interconnection compatibility with chamber whose wall thickness is other than 70 to 100 mm■ Muffler for Air Cooling Blower


High Frequency

9514-AB/WF500N

5 Hz to 10 kHz277.7m/s2

1.2m/s20mmp-p（※2）





283W×270H×205Dmm26kg

375-A/Z22

―

―

All-weather Type used in Workspace of Environmental Chamber

9514-AB/AW

1.2m/s

1.2kgAluminum

30.0N/mmф83mm10kgVertical


－40 ℃ to ＋125 ℃(Humidity : less than 98% RH)Forced Air (Blower)

382.5W×205H×333.5Dmm31kg

Built-in Accelerometer Model : 731-B, T-wrench (M5)

300N5 Hz to 3.0 kHz250.0m/s2

10mmp-pMore than 4300 Hz

Half Loop FlexureSleeve Shaft

373-A

Standard Accessory

500N5 Hz to 3.0 kHz416.7m/s2



375-D

Standard Accessory

（Shown without Trunnion Stand Option）

N/A

3 4




（Shown with Trunnion Stand Option）


(※1) Except for grip. (※2) 25 mmp-p displacement is available by changing axial stiffness to 15 N.mm. (※3) At 50 mm above table center. (※4) When attempting to drive the vibration generator at its maximum exciting force, vibration generator should be secured to reaction mass, rigid base or floor. (※5) Without any projection.

513 Series

511、512 Series 9514 Series

9514 Series, Modal & All-weather Application

Modal Analysis

511-A15N

2 Hz to 5 kHz

230.7m/s2

1.26m/s

5.0mmp-pMore than 3.9 kHz

0.065kg

Aluminum

5N/mm

M6 Screw (length=20mm)

-

-

Permanent Magnet


Natural

120W×190H×100Dmm

4.2kg

371-A

-

Trunnion Stand

-

Standard

512 -A49N

2 Hz to 20 kHz

376.9m/s2

1.14m/s


0.13kg

Magnesium

12N/mmф40mm2.0kg

-

Permanent Magnet



9.5kg

371-A

-

-


High Force : 64 N

512-A/A64N

2 Hz to 20 kHz

492.3m/s2

1.31m/s


0.13kg

Magnesium

12N/mmф40mm2.0kg

-

Permanent Magnet



9.5kg

372-A

Standard Accessory

-



512-D49N

2 Hz to 30 kHz

272.2m/s2

1.00m/s


0.18kg

Ceramics

12N/mmф40mm2.0kg

-

Permanent Magnet



9.5kg

371-A

-

-



512-D/A64N

2 Hz to 30 kHz

355.5m/s2

1.14m/s


0.18kg

Ceramics

12N/mmф40mm2.0kg

-

Permanent Magnet



9.5kg

372-A

Standard Accessory

-


Standard

513-B98N

3 Hz to 13 kHz

264.8m/s2

1.17m/s


0.37kg

Magnesium

14.0N/mmф79mm3.0kg

-

Permanent Magnet



26kg

371-A

-



High Force : 147 N & 196 N

513-B/A

3 Hz to 13 kHz


0.37kg

Magnesium

14.0N/mmф79mm3.0kg

-

Permanent Magnet



26kg

Standard Accessory




513-D98N

3 Hz to 24 kHz

175m/s2

0.92m/s


0.56kg

Ceramics

14.0N/mmф79mm3.0kg

-

Permanent Magnet



26kg

372-A

-




513-D/A147N

3 Hz to 24 kHz

262.5m/s2

1.14m/s


0.56kg

Ceramics

14.0N/mmф79mm3.0kg

-

Permanent Magnet



26kg

374-A

Standard Accessory



147N 196N

1.43m/s

372-A 374-A

397.2m/s2

1.67m/s

529.7m/s2

Standard

9514-AN/SD300N

5 Hz to 5 kHz250m/s2

1.2m/s15mmp-p（※2）


AluminumHalf Loop FlexureSleeve Shaft25.0N/mm（※2）ф75mm12kgVertical



283W×270H×205Dmm25kg

Model : 373-A--



High Force : 500 N

9514-AB/SD500N


1.2m/s25mmp-p





283W×270H×205Dmm26kg


Provided

Integrated Pneumatic SupportLarge Displacement : 30mmp-p

9514-AN/AS300N


1.2m/s30mmp-p



-ф75mm12kg



283W×276H×205Dmm27kg

Model : 373-A―

●Air Pump　●Midpoint Adjuster Block■Accelerometer　■Reaction Mass （※4）■Isolation (Rubber) Pad

Integrated Pneumatic SupportLarge Displacement : 30 mmp-p High Force : 500 N

9514-AB/AS500N


1.2m/s30mmp-p



-ф75mm12kg



283W×276H×205Dmm27kg


―■Accelerometer　■Reaction Mass （※4）■Isolation (Rubber) Pad

Category




Accessory

Option

Category




Option

Category


Option

Category


Blower

Accessory

Option

Category




Accessory

Option

Category




Option

Category


Option

Category


Blower

Accessory

Option

Category


Blower

Accessory

Option

Category


Blower

Accessory

Option

Modal Excitation

9514-AN/MD300N

5 Hz to 2.5 kHz300m/s2

1.2m/s15mmp-p


AluminumHalf Loop FlexureSleeve Shaft25.0N/mmф50mm8.0kg

Vertical（Any direction by using flexure）Less than 3 mT（※3）Permanent Magnet


283W×270H×205Dmm26kg

Model : 373-A

―

Collet-and-chuck Set (φ1.0, φ1.5, φ2.0, φ2.35, φ3.0) ■Accelerometer　■Reaction Mass (※4)■Isolation (Rubber) Pad■Model : 9514-AN/MD/Z12　Reinforced Stiffness : 50 N/mm (limited to max. 10 mmp-p)■Model : 9514-AN/MD/Z13　Low level acceleration with low　distortion (limited to max. 10 mmp-p)

■Accelerometer■Isolation (Rubber) Pad



High Frequency

9514-AB/WF500N

5 Hz to 10 kHz277.7m/s2

1.2m/s20mmp-p（※2）





283W×270H×205Dmm26kg

375-A/Z22

―

―

All-weather Type used in Workspace of Environmental Chamber

9514-AB/AW

1.2m/s

1.2kgAluminum

30.0N/mmф83mm10kgVertical


－40 ℃ to ＋125 ℃(Humidity : less than 98% RH)Forced Air (Blower)

382.5W×205H×333.5Dmm31kg

Built-in Accelerometer Model : 731-B, T-wrench (M5)

300N5 Hz to 3.0 kHz250.0m/s2



373-A

Standard Accessory

500N5 Hz to 3.0 kHz416.7m/s2



375-D

Standard Accessory

（Shown without Trunnion Stand Option）

N/A

3 4

Compressed Air

Specimen

Center position can be maintained

Center position lowers

Without Pneumatic Support Using Pneumatic Support

Pneumatic Support

Support FlexureSupport Flexure

Specimen

Matched Power Amplifier w/ Oscillator Option●Manual Operation of Blower●DC 12 V Input Power with Pressure Alarm Switch●Constant Current Mode●Remote Start/Stop with Remote Control Box●Remote Start/Stop with Timer and Remote Control Box●Duct Silencer●Stop Function of Fan●Oscillator, Vibration Meter, Timer, Remote Control Switch

Matched Power Amplifier

Specifications

Miscellaneous (Option Feature)



Σ9515 Series Compact Vibration Generator

New Wave

The Σ9515 Series uses a high-efficient permanent magnet for its magnetic structure instead of field power supply, therefore, it excels in electric power saving, and is quiet and not harmful to the environment. The rated exciting force of 0.6 kN can be achieved without cooling by an air cooling blower. If it is combined with the blower, the exciting force can increase up to 2 kN. With this excellent feature, it largely does execution for the express purpose of the following applications as well as ordinary vibration tests.

●Excitation source for rattle noise test

●Functional test of precision mechanical equipment

●Stress screening in production

●Experiments in the place such as laboratory

where any sound should be avoided

（※5）Abnormal Sound Analysis Feature (Additional Code : /Z01, Max. Displacement : 15 mmp-p） -

AccelerometerVibration IsolatorReaction Mass(※3) , Simplified Slip Table System

Pneumatic Payload Support enabling full displacement 9514 SeriesPayload Mass vs Full DisplacementSince the moving element of the compact vibration generator is suspended by flexure, its center operating position lowers with payload mass reducing the displacement required for an application. It can sometimes exceed the maximally rated value. Some 9514 models have the pneumatic payload support feature to compensate this effect.※ As for the details contact us.

The EM-772 is primarily designed for measuring the extremely high frequency characteristics of a suspension-head unit in hard disk drives and can meet the needs with low cross-talk.

Raised Type for Horizontal Application

Equipped with Degaussing Coil

●Upper limit of operating frequency : 60 kHz● Armature structure : ceramics● Applications : ・ Measurement of frequency characteristics of suspension head unit in hard disk drives ・ Measurement of spurious characteristics of crystal oscillator for mobile phone ・ Measurement of frequency characteristics of acceleration sensor

Super High Frequency Vibration Generator Model : EM-772

375-D

840VA

35.0Vrms

24.0Arms

2 Hz to 5.0 kHz

10kΩ1.5Vrms

1.46Ω0.73Ω70dB

less than 1.0%

25.0Arms

BNC

max. 200 VA

AC200V　50/60Hz

1800VA

480W×200H×450Dmm

35.0kg

Σ9515-AN/SD

Force

600N

2 Hz to 3000 Hz

240m/s2

0.6m/s

15mmp-p2.5kg

38N/mmф120mm25kg

less than 5 mT

Permanent Magnet


Natural

442W×340H×360Dmm

160ｋｇ

374-Ａ

T-wrench for M6, Eyebolt x 4 ea

ＡＣ100V　50/60Hz1.2kVA

-

Σ9515-AB/SD

High Force

2000N

2 Hz to 3000 Hz

800m/s2

1.5m/s

25mmp-p2.5kg

38N/mmф120mm40kg

less than 5 mT

Permanent Magnet


Forced Air

442W×365H×360Dmm

160ｋｇ

362D-0202-Σ15CRJ-1500

Muffler for blower


ＡＣ200/220V　50/60Hz　3ф6.2kVA

-

Σ9515-AB/ＡＳ

High Force w/ Pneumatic Support

2000N

2 Hz to 2500 Hz

444.4m/s2

1.5m/s

30mmp-p4.5kg

-ф120mm100kg

less than 5 mT

Permanent Magnet


Forced Air

442W×340H×424Dmm

165ｋｇ

362D-0202-Σ15CRJ-1500

Muffler for blower


ＡＣ200/220V　50/60Hz　3ф6.2kVA

0.5MPa1L/min

Model

CategoryMax. Exciting ForceFrequency RangeMax. AccelerationMax. VelocityMax. DisplacementMoving ElementAxial StiffnessArmature DiameterMax. Payload MassStray Field （※1）Field PowerAmbient Temp.CoolingDimensions （※2）Weight

Matched Amplifier

Accessory

Standard Option

Input Power

Shop Air

Special Order （※4）

Model


Matched Amplifier

Accessory

Standard Option

Input Power

Shop Air


ModelsFrequency Range

Frequency Adjust

Frequency AccuracyFrequency StabilityOutput WaveformFrequency Response

Harmonic Distortion

Frequency DisplayDisplay ResolutionFrequency AccuracyGate Time


Frequency Adjust


Harmonic Distortion


371-A/G、372-A/G、373-A/G、374-A/G

1 Hz to 100 kHz (2 ranges: 1 Hz to 1 kHz and 100 Hz to 100 kHz)

less than 2% (+2 reticles)

0.5 Hz/℃ typical at 1 kHz for range from 1 Hz to 1 kHz

sinusoidal wave

±1.0 dB within same range, reference levels for ranges are ones at 500 Hz and 5 kHz respectively.

6 digits

1.0Hz±1.0Hz

1.0s(fixed)

Fine : Min. 2 Hz for 1 Hz to 1 kHz, Min. 200 Hz for 100 Hz to 100 kHzCoarse : Variable of more than 5 Hz for 1 Hz to 1 kHz, Variable of more than 50 Hz for 100 Hz to 100 kHz

less than 0.3% from 5 Hz to 1 kHzless than 0.5% from 100 Hz to 50 kHzless than 0.7% from 50 kHz to 100 kHz

(※1)Stray field value is at 50 mm above table center. (※2)As for the details of dimensions contact us. (※3)When attempting to drive the vibration generator at its maximum exciting force, vibration generator should be secured to reaction mass, rigid base or floor. (※4)This optional feature is available only when ordered in advance. (※5)Analysis feature of abnormal sound cannot be provided with the vibration generator which incorporates the pneumatic load support.

Model

Apparent PowerOutput VoltageOutput CurrentFrequency RangeInput ImpedanceInput VoltageMatching ImpedanceLoad ImpedanceS/NDistortionMeterInput ConnectorInput to Blower

Input PowerMax. Power ConsumptionDimensionsMassOperating Environment

Model



371-A

110VA

20.0Vrms

5.5Arms

2～30kHz

10kΩ1.0Vrms

3.64Ω1.82Ω80dB

0.5％以下

7.5Arms

BNC

-

AC100V　50/60Hz

300VA

480W×149H×350Dmm

12.5kg approx.

372 -A

220VA

27.5Vrms

8.0Arms

2～30kHz

10kΩ1.0Vrms

3.44Ω1.72Ω80dB

0.5％以下

10.0Arms

BNC

Max.200VA

AC100V　50/60Hz

800VA

480W×149H×350Dmm

18.5kg approx.

375-A

720VA

30.0Vrms

24.0Arms

2～5.0kHz

10kΩ1.0Vrms

1.25Ω0.63Ω80dB

less than 0.5％

25.0Arms

BNC

Max.400VA

AC100V　50/60Hz

2400VA or app.

480W×249H×602Dmm

52.0kg approx.

375-D

840VA

35.0Vrms

24.0Arms

DC～5.0kHz

10kΩ1.5Vrms

1.46Ω0.73Ω70dB

less than 1.0％

25.0Arms

BNC

Max.200VA

AC200V　50/60Hz

1800VA or app.

480W×200H×450Dmm

35.0kg approx.

373-A

2～10kHz

373-A/Ｚ12

330VA

20.0Vrms

16.5Arms

2～10kHz

10kΩ

80dB

373-A/Ｚ13 373-ＦＷ

360VA

30.0Vrms

12.0Arms

1～5kHz

50kΩ

70dB

Max.200VA

374-A

440VA

40.0Vrms

11.0Arms

2～20kHz

10kΩ1.0Vrms

3.64Ω1.82Ω80dB

less than 0.5％

20Arms

BNC

Max.300VA

AC100V　50/60Hz

1.5ｋVA or app.

480W×249H×400Dmm

37.0kg approx.

Protector

5 6

ＤＣ～10kHz（※1）ＤＣ～4kHz（※2）

1.0Vrms1.21Ω0.67Ω

less than 0.5％

20ArmsBNC-

Temperature Range: 0℃ to 40℃、Humidity Range: 20％RH to 85％RH without dewdrop

AC100V　50/60Hz1.1ｋVA or app.

480W×249H×400Dmm37.0kg approx.

●Overcurrent

●Transistor temperature

●Leakage Protector

●Overcurrent



●Overcurrent


●Overcurrent

●Overvoltage


●Overcurrent


●Overload

●Overcurrent


●Overcurrent


●Overcurrent


●Overcurrent

●Overvoltage


●Overdisplacement

●Interlock

Compressed Air

Specimen

Center position can be maintained

Center position lowers

Without Pneumatic Support Using Pneumatic Support

Pneumatic Support

Support FlexureSupport Flexure

Specimen

Matched Power Amplifier w/ Oscillator Option●Manual Operation of Blower●DC 12 V Input Power with Pressure Alarm Switch●Constant Current Mode●Remote Start/Stop with Remote Control Box●Remote Start/Stop with Timer and Remote Control Box●Duct Silencer●Stop Function of Fan●Oscillator, Vibration Meter, Timer, Remote Control Switch

Matched Power Amplifier

Specifications

Miscellaneous (Option Feature)




New Wave

The Σ9515 Series uses a high-efficient permanent magnet for its magnetic structure instead of field power supply, therefore, it excels in electric power saving, and is quiet and not harmful to the environment. The rated exciting force of 0.6 kN can be achieved without cooling by an air cooling blower. If it is combined with the blower, the exciting force can increase up to 2 kN. With this excellent feature, it largely does execution for the express purpose of the following applications as well as ordinary vibration tests.

●Excitation source for rattle noise test

●Functional test of precision mechanical equipment

●Stress screening in production

●Experiments in the place such as laboratory

where any sound should be avoided

（※5）Abnormal Sound Analysis Feature (Additional Code : /Z01, Max. Displacement : 15 mmp-p） -

AccelerometerVibration IsolatorReaction Mass(※3) , Simplified Slip Table System

Pneumatic Payload Support enabling full displacement 9514 SeriesPayload Mass vs Full DisplacementSince the moving element of the compact vibration generator is suspended by flexure, its center operating position lowers with payload mass reducing the displacement required for an application. It can sometimes exceed the maximally rated value. Some 9514 models have the pneumatic payload support feature to compensate this effect.※ As for the details contact us.

The EM-772 is primarily designed for measuring the extremely high frequency characteristics of a suspension-head unit in hard disk drives and can meet the needs with low cross-talk.

Raised Type for Horizontal Application

Equipped with Degaussing Coil

●Upper limit of operating frequency : 60 kHz● Armature structure : ceramics● Applications : ・ Measurement of frequency characteristics of suspension head unit in hard disk drives ・ Measurement of spurious characteristics of crystal oscillator for mobile phone ・ Measurement of frequency characteristics of acceleration sensor

Super High Frequency Vibration Generator Model : EM-772


The Σ9515 Series uses a high-efficient permanent magnet for its magnetic structure instead of field power supply, therefore, it excels in electric power saving, and is quiet and not harmful to the environment. The rated exciting force of 0.6 kN can be achieved without cooling by an air cooling blower. If it is combined with the blower, the exciting force can increase up to 2 kN. With this excellent feature, it largely does execution

applications as well as ordinary vibration tests.

Functional test of precision mechanical equipment

375-D

840VA

35.0Vrms

24.0Arms

2 Hz to 5.0 kHz

10kΩ1.5Vrms

1.46Ω0.73Ω70dB

less than 1.0%

25.0Arms

BNC

max. 200 VA

AC200V　50/60Hz

1800VA

480W×200H×450Dmm

35.0kg

Σ9515-AN/SD

Force

600N

2 Hz to 3000 Hz

240m/s2

0.6m/s

15mmp-p2.5kg

38N/mmф120mm25kg

less than 5 mT

Permanent Magnet


Natural

442W×340H×360Dmm

160ｋｇ

374-Ａ


ＡＣ100V　50/60Hz1.2kVA

-

Σ9515-AB/SD

High Force

2000N

2 Hz to 3000 Hz

800m/s2

1.5m/s

25mmp-p2.5kg

38N/mmф120mm40kg

less than 5 mT

Permanent Magnet


Forced Air

442W×365H×360Dmm

160ｋｇ

362D-0202-Σ15CRJ-1500

Muffler for blower


ＡＣ200/220V　50/60Hz　3ф6.2kVA

-

Σ9515-AB/ＡＳ

High Force w/ Pneumatic Support

2000N

2 Hz to 2500 Hz

444.4m/s2

1.5m/s

30mmp-p4.5kg

-ф120mm100kg

less than 5 mT

Permanent Magnet


Forced Air

442W×340H×424Dmm

165ｋｇ

362D-0202-Σ15CRJ-1500

Muffler for blower


ＡＣ200/220V　50/60Hz　3ф6.2kVA

0.5MPa1L/min

Model


Matched Amplifier

Accessory

Standard Option

Input Power

Shop Air


Model


Matched Amplifier

Accessory

Standard Option

Input Power

Shop Air



Frequency Adjust


Harmonic Distortion



Frequency Adjust


Harmonic Distortion


371-A/G、372-A/G、373-A/G、374-A/G

1 Hz to 100 kHz (2 ranges: 1 Hz to 1 kHz and 100 Hz to 100 kHz)

less than 2% (+2 reticles)

0.5 Hz/℃ typical at 1 kHz for range from 1 Hz to 1 kHz

sinusoidal wave

±1.0 dB within same range, reference levels for ranges are ones at 500 Hz and 5 kHz respectively.

6 digits

1.0Hz±1.0Hz

1.0s(fixed)

Fine : Min. 2 Hz for 1 Hz to 1 kHz, Min. 200 Hz for 100 Hz to 100 kHzCoarse : Variable of more than 5 Hz for 1 Hz to 1 kHz, Variable of more than 50 Hz for 100 Hz to 100 kHz

less than 0.3% from 5 Hz to 1 kHzless than 0.5% from 100 Hz to 50 kHzless than 0.7% from 50 kHz to 100 kHz

(※1)Stray field value is at 50 mm above table center. (※2)As for the details of dimensions contact us. (※3)When attempting to drive the vibration generator at its maximum exciting force, vibration generator should be secured to reaction mass, rigid base or floor. (※4)This optional feature is available only when ordered in advance. (※5)Analysis feature of abnormal sound cannot be provided with the vibration generator which incorporates the pneumatic load support.

Model



Model



371-A

110VA

20.0Vrms

5.5Arms

2～30kHz

10kΩ1.0Vrms

3.64Ω1.82Ω80dB

0.5％以下

7.5Arms

BNC

-

AC100V　50/60Hz

300VA

480W×149H×350Dmm

12.5kg approx.

372 -A

220VA

27.5Vrms

8.0Arms

2～30kHz

10kΩ1.0Vrms

3.44Ω1.72Ω80dB

0.5％以下

10.0Arms

BNC

Max.200VA

AC100V　50/60Hz

800VA

480W×149H×350Dmm

18.5kg approx.

375-A

720VA

30.0Vrms

24.0Arms

2～5.0kHz

10kΩ1.0Vrms

1.25Ω0.63Ω80dB

less than 0.5％

25.0Arms

BNC

Max.400VA

AC100V　50/60Hz

2400VA or app.

480W×249H×602Dmm

52.0kg approx.

375-D

840VA

35.0Vrms

24.0Arms

DC～5.0kHz

10kΩ1.5Vrms

1.46Ω0.73Ω70dB

less than 1.0％

25.0Arms

BNC

Max.200VA

AC200V　50/60Hz

1800VA or app.

480W×200H×450Dmm

35.0kg approx.

373-A

2～10kHz

373-A/Ｚ12

330VA

20.0Vrms

16.5Arms

2～10kHz

10kΩ

80dB

373-A/Ｚ13 373-ＦＷ

360VA

30.0Vrms

12.0Arms

1～5kHz

50kΩ

70dB

Max.200VA

374-A

440VA

40.0Vrms

11.0Arms

2～20kHz

10kΩ1.0Vrms

3.64Ω1.82Ω80dB

less than 0.5％

20Arms

BNC

Max.300VA

AC100V　50/60Hz

1.5ｋVA or app.

480W×249H×400Dmm

37.0kg approx.

Protector

5 6

ＤＣ～10kHz（※1）ＤＣ～4kHz（※2）

1.0Vrms1.21Ω0.67Ω

less than 0.5％

20ArmsBNC-

Temperature Range: 0℃ to 40℃、Humidity Range: 20％RH to 85％RH without dewdrop

AC100V　50/60Hz1.1ｋVA or app.

480W×249H×400Dmm37.0kg approx.

●Overcurrent



●Overcurrent



●Overcurrent


●Overcurrent

●Overvoltage


●Overcurrent


●Overload

●Overcurrent


●Overcurrent


●Overcurrent


●Overcurrent

●Overvoltage


●Overdisplacement

●Interlock

12

(190)

(19.5)

107

63.5

120 100

M6

216


4-Ｍ4,Depth:6（Helisert）

φ30

Ｍ6,Depth:8.5（Insert）

150

φ40


370

φ79

220

M6,Depth:12（Insert）

φ4.8ThroughHole

M10

Collet Chuck

(31)

816(55)

12-φ10 on both sides

270

147

Armature table φ50 φ190 (15)

φ8ThroughHole

224.5

4560

80

234283

45°

φ62

4-Ｍ4,Depth:12（Insert）

φ215

9514-AB/AW

φ150

175

277

250

289.5

φ120

φ50φ100

340442

13-M6,Depth:12（Helisert）

45°

Σ9515 Series

φ340

360

511-A 512 Series

513 Series

9514-AN/MD

9514-AN/SD　9514-AB/SD　9514-AB/WF

9514-AN/AS　9514-AB/AS　

511-A 512 Series

513 Series

9514-AN/MD

9514-AN/SD　9514-AB/SD　9514-AB/WF

9514-AN/AS　9514-AB/AS　Armature table

φ75 φ190 (15)

234283(302.6)

276

227.5

147

φ60φ35

45°

13-M5,Depth:10

Armature tableφ75

234283

224.5

270

147

φ190 (15)

φ60φ35

45°

13-M5,Depth:10

Armature table φ83

382.5φ318.5

129

φ80.5205

9-M5,Depth:10

φ6045°

Notes

NOV-2014CL-159-01-E

http://www.emic-net.co.jp/

□ Quality Management System ISO 9001□ Enviromental Management System ISO 14001We achieve the above certifications.

Scope of Application　　ISO 14001 ： Mishima Factory

Head Office

Chubu Sales Office

Osaka Sales Office

Mishima Factory

Shanghai Office

THAI EMIC CO., LTD.

27-3 Nishigotanda 2-chome Shinagawa-ku Tokyo 141-0031, JapanTEL : (03)3494-1221, FAX : (03)-3494-1288Mizunami Creation Park, 2020 Yamada-machi Mizunami-city Gifu 509-6104, JapanTEL : (0572)26-8585, FAX : (0572)26-9283Hanahara 5th Bldg., 6Fl., 8-17 Nishinakajima 7-chome Yodogawa-ku Osaka 532-0011, JapanTEL : (06)6886-0451, FAX : (06)6886-045411 Heiseidai Mishima-city Shizuoka 411-0042, JapanTEL : (055)988-8411, FAX : (055)988-2223

Room 904, Building A, Oriental Financial Plaza No. 1168 Century Avenue, Pudong, Shanghai 200122, PR ChinaTEL : +86-021-5081-5604, FAX : +86-021-3429-3502Glas Haus Building 11 Floor, Unit No.1101/4 1 Soi Sukhumvit 25 (Daengprasert), Sukhumvit Road, Wattana, Bangkok 10110TEL : +66(0)2260-0246, FAX : +66(0)2260-0248

for Modal Excitation & Analysis, Calibration, Reliability Test, etc. for Modal Excitation & Analysis, Calibration, Reliability Test, etc.







Compact Vibration Generator Outline Drawing

Compact Vibration Generator & Matched Power Amplifier · 2018. 5. 7. · vibration generator can be...

Documents

Transcript of Compact Vibration Generator & Matched Power Amplifier · 2018. 5. 7. · vibration generator can be...