CNC Controllers - Spinner Takım Tezgahları Fabrikası · PDF file ·...

CNC Controllers

Specifications

Specifications 5/1/04

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Controlled axis

32 axes J802 - - - - - -

20 axes - - - -

9 axes - - - - - -

Machine groups １group

Max. 3 groups S836 - -

Max. 2 groups - - - - - -

Control paths 1 path

Max. 10 path S801 - - - - - -

Max. 4 path - - - -

Max. 2 path - - - - - -

Control axes(each path) 2 axes - - - -

3 axes - - - -Simultaneously controlled axes (each path) Simultaneous 2 axes

Max. 24 axes J801 - - - - - -

Max. 12 axes - - - -

Max. 5 axes - - - - - -

Max. 24 axes J803 - - - - - -

Max. 5 axes - - - - - -

Max. 4 axes - - - -

Axis control by PMC Max. 32axes. (Not available on Cs axis) J804 - - - - - -

Max. 16axes. (Not available on Cs axis) - - - -

Max. 8axes. (Not available on Cs axis) - - - - - -

Max. 4 axes / 8 axes S837 - - - - - -

Max. 4 axes / 6 axes - - - -

Max. 2 axes / 2 axes - - - - - -

Max. 4 axes / 8 axes J852 - - - - - -

Max. 4 axes / 6 axes - - - -

Max. 2 axes / 2 axes - - - - - -

Controlled path for Loader Max. 8 path - - - - - -

Max. 2 path - - - -

Max. 1 path - - - - - -

Controlled axes for Loader Max. 4 axes

Simultaneously controlled axes for Loader Max. 4 axes

Axis control by PMC for Loader Max. 4 axes

Axis name - - - -

- - - -

- - - -

Axis name expansion Max 3 characters

Arbitary axis name setting Included in Custom macro function

Spindle name expansion Max. 3 characters. Included in Multi-spindle function.

Synchronous/Composite control S816

Designation of Spindle axes( each path / Total )

Cs contouring control( each path / Total )

Series 31i -A5Series 310i -A5Series 310i s-A5

Max. controlled axes(Machine controlled axes + Loader controlled axes)(Machine controlled axes are including Cs axes)

Controllable axes expansion( each path )(including PMC axes and Cs axes)

Simultaneously controlled axes expansion( each path)

DrawingNumberItem Specifications

Series 32i -ASeries 320i -ASeries 320i s-A



Basic three axes are X, Y and Z, additional axes are optional from U, V, W, A, B and C.In case of G code system A, basic 2 axes are X and Z, additional axes are optional from Y, A, B and C.In case of G code system B/C, basic 2 axes are X and Z, additional axes are optional from Y, U, V, W, A, B and C.

:Standard :Standard option :Option　 :Function included in another option -:Not Available Note) Some combinations of these options are restricted.　　　　　　In case of 300i /310i /320i /300i s/310i s/320i s, using CNC Screen Display Function is a

02/05 GFTE-585A-EN - 2 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Series 31i -A5Series 310i -A5Series 310i s-A5Drawing

NumberItem Specifications





Superimposed Control S818

Synchronous/Composite/Superimposed control by program command S890

Axis synchronous control Max. 12 pairs. J843 - - - - - -

Max. 6 pairs. - - - -

1 pairs. - - - - - -

Twin table control *99 J698 - - - -

Arbitrary angular axis control J924

Inclined Rotary Axis Control S688 - - - -

Tandem control J733

Tandem Disturbance Elimination Control Axis synchronous control is required. S660

Torque control Included in PMC axis control. - -

Pole Position Detection Function S744

Control axis detach J807

Chopping J707 - - - -

Increment system IS-A,　IS-B

Increment system C J805

Increment system D 0.00001mm､0.00001deg､0.000001inch S694

Increment system E 0.000001mm､0.000001deg､0.0000001inch S805 - -

Flexible feed gear Optional DMR

Arbitrary command multiply 1/9999 - 9999times S806

Learning control J705 - -

Preview repetitive control J706 - -

Learning control for parts cutting R510 - -

Dual position feedback J704

HRV2 control

HRV3 control J398

HRV4 control J399 - -

Inch/metric conversion J876

Interlock

Machine lock all / each axis

Emergency stop

Over travel

Stored stroke check 1

Stroke limit external setting J845

Stored stroke check 2,3 J840

Stored limit check before move J749

Chuck and tail stock barrier J720 - - - -

Mirror image each axis

Follow-up

Servo off/Mechanical handle

Chamfering on/off - - - -

Interference check for each path J839 - - - - -

Interference check for rotary area S643 - -Unexpected disturbance torque detection function J718

FANUC SERVO MOTOR β SeriesUnexpected distubance torque detection

S812

Fine torque sensing *99 J982 - -

Rotary axis control J743 - -

0.0001mm､0.0001deg､0.00001inch

All / each axis, each direction, block start, cutting block start

Only for more than 2 path control

02/05 GFTE-585A-EN - 3 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







Position switch J846

High speed position switch J987 - -Direction-dependent type of high speed position switch S721 - -

Linear scale I/F with absolute address reference mark J670

Linear scale I/F expansion with absolute address reference mark S730

Temporary absolute coordinate setting J786

Dual check safety S661

Operation

Automatic operation

MDI operation

DNC operation Reader/puncher interface is required.

DNC operation with memory card CF card and PCMCIA Card Attachiment is required. *2

Schedule function

Program number search

Sequence number search

Sequence number comparison and stop J844

Program restart J838

Tool retract and recover J823 - -

Wrong operation prevention

Retraction for Rigid tapping J664

Buffer register

Dry run

Single block

Manual continuous feed (JOG)

Manual reference position return

Reference position setting without DOGReference point setting with mechanical stopper J729

Reference position return speed set

Reference position shift

Manual handle feed 1-unit 1 unit J835

Manual handle feed 2/3-units 2 units/3 units J836

Manual handle feed rate ×1､×10､×m ､×nm：0～2000､ｎ：0～2000

Manual feed for 5-axis machining S679 - - - -

Handle interruption J837FANUC SERVO MOTOR β Serieswith I/O Link Manual handle interface

S722

Incremental feed ×1､×10､×100､×1000､×10000

Jog and handle simultaneous mode

Manual numerical command J667 - -

Reference position signal output S629

Retrace J730 - - - -

Manual handle retrace *99 J998

Manual liner/circular interpolation Only for 1path *99

I/O Link expansion 3rd channel is required.

02/05 GFTE-585A-EN - 4 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







Interpolation functions

Nano interpolation

Positioning G00 (Linear interpolation type positioning is possible)

Single direction positioning G60 J812

Exact stop mode G61

Tapping mode G63

Cutting mode G64

Exact stop G09

Linear interpolation

Circular interpolation

Exponential interpolation J711 - -

Dwell (Second designation)

Polar coordinate interpolation J815

Cylindrical interpolation J816

Helical interpolation J819

Helical interpolation B J655 - - - - - -

Involutes interpolation J710 - -

Hypothetical axis interpolation J652 - -

Conical/spiral interpolation J780 - -

Smooth interpolation J777 - -

Nano smoothing S687 - -

Nano smoothing for 5-axis machining R512 - - - -

Thread cutting, synchronous cutting Spindle serieal output is required. J824

Multi threading

Thread cutting retract J825

Continuous threading

Variable lead thread cutting J827

Circular thread cutting J731 - -

Polygon turning J817

Polygon machining with two spindles J708

Skip G31

Multi-step skip J849

High-speed skip Input signal is 8 points. J848

Torque limit skip

Reference position return G28

Reference position return check G27

2nd reference position return

3rd/4th reference position return J830

Floating reference position return J831 - -

Normal direction control J813 - - - -

NURBS interpolation J669 - -

3 dimensional circular interpolation S673 - - - -

Balanced cutting J834 - - - - -

Index table indexing J822 - - - -

Continuous high-speed skip J770 - - - - -

Gentle normal direction control J986 - - - - -

Continuous dressing J630 - - - -

AI contour control I or ＩＩ is required.

Circular interpolation plus max. 2 axes linear interpolation

Circular interpolation plus max. 4 axes linear interpolation.

Dwell in seconds and dwell in revolution (In case of dwell in revolution for M system, threading, synchronous cutting option is required.)

AI contour control I or ＩＩ is required

Only for more than 2 path control

02/05 GFTE-585A-EN - 5 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







Infeed control J631 - - - -

High-speed cycle cutting J832 - -

General purpose retract J997

Feed function

Rapid traverse rate Max. 999.999m/min（1µm）

Max. 99.9999m/min（0.1µm）

Max. 99.9999m/min（0.01µm）

Max. 99.9999m/min（0.001µm） - -

Rapid traverse override Fo, 25, 50, 100% or 0～100%(1% Step)

Feed per minute

Feed per revolution

Without position coder feed per revolutionWithout position coder constant surface speed controlTangential speed constant control

Cutting feedrate clamp

Automatic acceleration/deceleration

Rapid traverse bell-shaped acceleration/decelerationOptimum torque acceleration/deceleration S675

Bell-shaped acceleration/deceleration after cutting feed interpolation

J829

Linear acceleration/deceleration before cutting feed interpolation

Included in AI contour control I or ＩＩ

Feedrate override 0 - 254%

2nd feedrate override 0 - 254% J810 - -

One-digit F code feed J820 - - - -

Inverse time feed J715 - - - -

Jog override 0 - 655.34%

Override cancel

Manual per revolution feed - - - -

External deceleration J842

Feed stop J847 - -

Automatic corner deceleration Included in AI contour control I or ＩＩ

Feedrate clamp by circular radius Included in AI contour control I or ＩＩ

Linear acc/dec after cutting feed interpolationAI contour control I Look-ahead block no. is Max．30 S807

AI contour control II S808

High-speed processing S809 - -

Look-ahead blocks expansion S815 - -

Bell-type acceleration/deceleration before look ahead interpolation Included in AI contour control I or ＩＩ

Jerk control AI contour control ＩＩ is required. S678Rigid tapping bell-shaped acceleration/deceleration Rigid tapping is required. S702

Rapid traverse: linearCutting feed: exponential, linear

Look-ahead block no. is Max．600AI contour control ＩＩ is required.(Path number <= 2 and Axes number <=12)

Look-ahead block no. is Max．1000AI contour control ＩＩ is requierd

Look-ahead block no. is Max．200(32i Max．80)(Path number <= 4 and Axes number <=20)

For M system, threading, synchronous cutting option is required.Included in constant surface speed control.Included in constant surface speed control.

AI contour control I or ＩＩ is required.

02/05 GFTE-585A-EN - 6 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







Program input

Tape code EIA/ISO

Label skip

Parity check Horizontal and vertical parity

Control in/out

Optional block skip 1

Optional block skip 9 J955

Max. programmable dimension ±9 digit （R,I,J and K is ±12digit ）

Program file name 32 characters

Sequence number N8 digit

Absolute/incremental programming Combined use in the same block

Decimal point programming/pocket calculator type decimal point programming

Input unit 10 time multiply

Diameter/Radius programming Dynamic swithching of diameter/radius specification S630 - -

Plane selection G17､G18､G19

Rotary axis designation

Rotary axis roll-over

Polar coordinate command J818 - - - -

Coordinate system setting

Automatic coordinate system setting

Workpiece coordinate system G52 - G59 J894

Workpiece coordinate system preset J917Addition of workpiece coordinate system 48-pairs 48 pairs J895

Addition of workpiece coordinate system 300-pairs 300 pairs J919 - -

Direct input of workpiece orgin offset value measuredManual absolute on and off

Direct drawing dimension programming J870 - - - -

G code system A - - - -

G code system B/C J871 - - - -

Chamfering/Corner R J875 - - - -

Optional chamfering corner R S615 - - - -

Programmable data input G10

Programmable parameter input

Sub program call 10 folds nested

Custom macro J873Addition of custom macro common variables #100 - #199､#500 - #999 J887

Custom macro common variables between each path Only for more than 2 path control

Interruption type custom macro J874

Canned cycle - - - -

Multiple repetitive cycles J877 - - - -

Multiple repetitive cycles II Pocket profile J889 - - - -

Canned cycle for drilling J890

Circular interpolation by R programming R,I,J,K 12digit

Mirror image for double turret J881 - - - -

Automatic corner override J891

Scaling J892

Coordinate system rotation J893

Included in workpiece coordinate system.

02/05 GFTE-585A-EN - 7 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







3-dimensional coordinate system conversion J713

Tilted working plane command S676 - -

Programmable mirror image J880

Figure copying J897 - - - - -

Tape format for FS15 J882 - -

Tape format for FS10/11 J882 - - - - - -

Macro executor J888

C-language executor J734

SRAM Extension for C-executor J736

Custom software 256KByte J738#256K

512KByte J738#512K

1MByte J738#1M

2MByte J738#2M

3Mbyte J738#3M

4MByte J738#4M

5MByte J738#5M - -

6MByte J738#6M - -

Coordinate system shift - - - -

Direct input of coordinate system shift - - - -

Embedded macro *99 S652

Embedded macro for milling Embedded macro is required. *99 S654 - - - -

Small-hole peck drilling cycle J896 - - - -

Canned cycles for grinding J640

Real time custom macro S842

Pattern data input *99

Integrated Operation guidance function

MANUAL GUIDE i S780

MANUAL GUIDE i Basic S781

MANUAL GUIDE i Milling Cycle S782

MANUAL GUIDE i Turning Cycle S783 - - - -

MANUAL GUIDE i Animation S784

MANUAL GUIDE i Set-up Guidance *99 S785

MANUAL GUIDE i Multi path lathe *99 S786 - - - -

Auxiliary/Spindle speed function

Auxiliary function M8 digit

2nd auxiliary function B8 digit J920

Auxiliary function lock

High-speed M/S/T/B interface

Waiting function Only for more than 2 path con

Multiple command of auxiliary function 3

Spindle speed function S5 digit , binary output

Spindle serial output J850 - - - - - -

- - - -

- - - - - -

Constant surface speed control J855

Spindle override 0 - 254%

Actual spindle speed output J856

Spindle orientation 1 spindle J853

Spindle orientation expansion Max. 8 spindles J861 - - - - - -

Max. 6 spindles - - - -

S5 digit , serial output (max. 6 spindles)



02/05 GFTE-585A-EN - 8 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







Max. 2 spindles - - - - - -

Spindle output switching function 1 spindle J854Spindle output switching function expansion Max. 8 spindles J862 - - - - - -

Max. 6 spindles - - - -

Max. 2 spindles - - - - - -

Spindle synchronous control J858

Simple spindle synchronous control J748

Multi spindle control J859

Spindle positioning J851

Rigid tap J828

Rigid tapping by manual handle J651 - -Arbitrary position reference setting for CS axis S664 - -

M code group check J922 - -

Spindle speed fluctuation detection J857

Live tool control with servo motor J978

Tool function/Tool compensation

Tool function T7+1/T6+2/T5+3 - - - -

Tool function T8 digit - - - -Tool offset pairs (Note)Specify total of tool offset pairs of each path. Max. digit of tool offset is 9.

32

Tool offset pairs 64-pairs 64 J925




Tool offset pairs 499-pairs 499 S614 - -

Tool offset pairs 999-pairs 999 J721 - -

Tool offset pairs 2000-pairs 2000 S622 - -

Tool offset memory B Geometry/wear memory S616 - - - -

Tool offset memory C J937 - - - -

Common offset memory between each path Only for more than 2 path control

Tool length offset - - - -

Tool offset S617Tool center point control for 5-axis machining S677 - - - -

Tool posture control for Tool center point control for 5-axis machining S994 - - - -

Y-axis offset J934 - - - -Tool radius・Tool nose radius compensation J930

3-dimensional tool compensation J727 - - - - -Cutting point interpolation for cylindrical interpolation S674 - -

Tool geometry/wear compensation J931 - - - -

2nd Geometry Tool Offset J980 - - - -

Tool pair for tool management function: 64 pairs 64 tools S830



Tool management function: Customized data expansion(5～20) S834

Tool geometry/wear compensation is required

Distinction between geometry and wear, or between cutter and tool length compensation.

02/05 GFTE-585A-EN - 9 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







Tool management function:Customized data expansion(5～40) S835

Tool management expansion S852Tool management function for oversize tools S602

Tool management tool attachment/detachment function S997

Tool offset value counter input - - - -

Tool length measurement - - - -

Automatic tool length measurement S618 - - - -

Tool length/work zero point measurement J668 - - - - -

Automatic tool offset J932 - - - -

Direct input of tool offset value measured - - - -

Direct input of offset value measured B J933 - - - -

Rotary table dynamic fixture offset S728 - - - - -Changing Active Offset Value with Manual Move S825

Tool length compensation in tool axis direction S670 - - - - -

Work setting error compensation S993 - -Tool radius compensation for 5-axis machining S667 - - - -

Measurement cycle Embedded macro *99 S663 - - - -

Wheel wear compensation J633 - - - - -Direct input of offset value measured B for 2 spindle lathe

J686 - - - -

Tool life management J935Addition of tool pairs for tool life management Max. 1024 pairs J936

Accuracy compensasion function

Backlash compensationBacklash compensation for each rapid traverse and cutting feedSmooth backlash compensation

Stored pitch error compensation J841Interpolation type pitch error compensation S644 - -

Bi-directional pitch error compensation S656

Extended bi-directional pitch error compensation S657

Periodical secondary pitch error compensation S634 - -

Inclination compensation J981

Straightness compensation J747 - -

Interpolation type straightness compensation S639 - -

3-dimensional error compensation S666 - -

Thermal Growth Compensation Along Tool Vector S860 - -

Hobbing/Electric gear box

Simple electric gear box J779

Skip function for EGB axis J696 - -

Electric gear box 2 pair S710 - -Electric gear box automatic phase synchronization S711 - -

Spindle electric gear box *99 S720 - -

128points. Stored pitch error compensation is required.Stored pitch error compensation is required.

Stored pitch error compensation, Bi-directional pitch error compensation are required.

Stored pitch error compensation is required.Stored pitch error compensation is required.Stored pitch error compensation is required.

Stored pitch error compensation is required.Stored pitch error compensation is required.

02/05 GFTE-585A-EN - 10 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







Flexible synchronous control S709 - -

Editing operation

32Kbyte - - - - - -

64Kbyte J943128Kbyte J944256Kbyte J945512Kbyte J9461Mbyte J9472Mbyte J9484Mbyte J949 - -8Mbyte J959 - -

Number of registerable programs 63Number of registerable programs expansion 1 Max. 1000 programs J953

Number of registerable programs expansion 2 Max 4000 programs J954 - -

Part program editing

Program protect

Key and progrm encryption J778 - -

Extended part program editing

Playback J879

Machining time stamp J964 - -

Backgriound editting J956

Multi part program editting

Memory card program edit & operation

Memory card program entry count extension Max. 1000 programs S995

Setting and display

Status display

Clock function

Current position display

Program commnent display

Parameter setting and dispaly

Alarm display

Alarm history display

Operator message history display

Operation history display

Remote diagnostic

Run hour and parts count display J971

Actual cutting feedrate displayDisplay of spindle speed and T code at all screens

Directory display of floppy cassette Included in reader/puncherinterface

Optional path name display Only for more than 2 path control

Operating monitor screen Load meter etc.

Servo setting screen

Spindle setting screen Only for αi series

Servo waveform display

Maintenance information screen

Software operator's panel J960Software operator's panelgeneral purpose switch J961

・Machine remote diagnosis package + Ethernet(Function:Reading CNC/PMC status, etc.)

Software operator's panel is required.

External message or external data input is required.

Program name 31 characters

Max 63 progrmas. 　The tool on PC is required to convert and store files

Including background editingonly available on 15"and 10" display unit

Part program storage size *3

(Note)Specify total of part program storage size of each path.

02/05 GFTE-585A-EN - 11 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







Extended software operator's panel general purpose switchMachine operation menu S844

Multi-language display English

Japanese J965

German S839

French S841

Spanish J970

Italian J968

Chinese J967

Chinese(simplified characters) S829

Korean J969

Portuguese J678

Dutch J962

Danish J650

Swedish S691

Hungarian S690

Czech S689

Polish S739

Dynamic display language switching included in Multi-Language display

Data protection key 4 types

Protection of Data at Eight Levels S828

Erase CRT screen display Manual or Automatic *1

Parameter set supporting screen

Machining condition selecting function AI contour control I or ＩＩ is required. S637

Help function

Self-diagnosis function

Periodic maintenance screenDisplay of hardware and software configurationServo information screen

Spindle information screen

Trouble diagnosis *99

Machine alarm diagnosis *99 S813

Graphic function J972

touch panel control *99 J682

External touch panel interface J685

Virtual MDI Key S882

Data input/output

Reader/puncher interface Reader/puncher (Ch.1) interface J900

Reader/puncher interface Reader/puncher (Ch.2) interface J901

Fast data server Only 1 path control/Option board is required S737

Data server buffer mode Fast data server is required J728 - -

External tool offset J910

External machine zero point shift J912

External message J911

External data input J913

External key input

External workpiece number search 9999

External program number search 1 - 9999

Included in software operator's panel general purpose switch

Including External tool offset, External tool offset, and External message.

02/05 GFTE-585A-EN - 12 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







Memory card input/output

Screen hard copy *2

Power Mate CNC manager J674

External I/O device control J902

One touch macro call S655

Automatic data backup

Interface function

Embedded Ethernet

Fast Ethernet Option board is required. S707

PROFIBUS-DP master Option board is required. S731

PROFIBUS-DP slave Option board is required. S732

DeviceNet master Option board is required. S723

DeviceNet slave Option board is required. *99

FL-net Option board is required. J692

Status output signal

7.2" monochrome LCD8.4" color LCD10.4" color LCD15" color LCD

10.4" color LCD15" color LCDOption 2 slots(width 60mm)Option 4 slots(width 90mm)Separate MDI(ONG small, horizontal type) *1

Control unit dimensions forLCD unit mounted type(depth)

Stand–alone type display *8 *10

Option 1 slots (depth 90mm except 15"LCD)

Control unit incorporated type display unit *8 *9(Not available in 300i)

OthersNC ready, servo ready, automatic operation, automatic operation start lamp, feed hold, reset, NC alarm, distribution end, rewinding, inch input, cutting, inposition, thread

Stand–alone type control unit(width)

Option 2 slots(depth 110mm except 15"LCD)

Without option slots (depth 60mm except 15"LCD)

02/05 GFTE-585A-EN - 13 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







Separate MDI(ONG vertical type, horizontal type) *1

Separate MDI (personal computer key, vertical type)

Touch panel Only for 10.4", 15" LCD *9*10

1st PMC path

Basic instruction: 25nsec/stepMax. step number ladder: 64000

2nd PMC path


3rd PMC path


128KbyteS977#128K

256KbyteS977#256K

2nd path PMC message display function

128KbyteS978#128K

3rd path PMC message display function

128KbyteS979#128K

I/O Link expansion 2nd channel DI/DO points: addition 1024/1024 points S981

I/O Link expansion 3rd channel DI/DO points: addition 1024/1024 points S985

I/O Link expansion 4th channel DI/DO points: addition 1024/1024 points S986 - - - - - -

Step sequence Only 1st PMC path S982

Nonvolatile PMC extra relay function S984Standard operator's panel

I/O Link - AS-i converterManula pulse generator

Pendant type manual pulse generator

Handy machine operator’s panel

Connectable servo motor

Connectable servo amplifier

Connectable spindle motor

Connectable spindle amplifier

Input power supply DC24V±10%

1st path PMC message display function

Machine interface (I/O Link)Max. DI/DO points: 4096/4096 points (FS30i) 3072/3072 points (FS31i/32i)(Note) If using more than 1024/1024 points, I/O Link expansion option is necessary.

(For expanding 4096/4096 points, option board is required. )

Separate detector I/F unit for full-closed control

Ambient temperature of unit *10

LCD mounted type control unit, display unit for stand-alone type control unitAt operating: 0℃ - 58℃At nonoperating: -20℃ - 60℃

FANUC AC spindle motor αi seriesFANUC servo amplifier αi series

FANUC servo amplifier αi series SVM (for 30i /31i /32i）, βi series SVM

With axis selection and magnification switches

I/O Unit-MODEL A

I/O Unit-MODEL B

Operator's panel I/O module

Power magnetics control I/O module

MDI unit

FANUC serial interface for rotary /linear encoder

A quad B rectangle wave interface for rotary/linear encoder

Tota

l 112

,000

ste

ps

for 3

pat

hs

Connection panel I/O module (DI/DO module, 2A output module, Analog input module)

Analog 1Vp-p interface for rotary /linear encoder

FANUC AC servo motor αi S series, αi series, βi s series

02/05 GFTE-585A-EN - 14 -

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path

Milling path

Turning path







Ambient relative humidity *10

Vibration IEC68-2-6 conforming

Normally: 75%RH or less (No dew, nor frost allowed)Short term (within one month): 95%RH or less(No dew, nor frost allowed)

Stand alone type control unitAt operating: 0℃ - 55℃At nonoperating: -20℃ - 60℃

02/05 GFTE-585A-EN - 15 -

Windows® 2000/XP *4FOCAS2 *7Basic operation package 2CNC screen display functionLadder editing packageVisual Studio® .NET *4

（GUI = Graphical User Interface）

Windows® CE .NET *4FOCAS2 *7

Software packages CNC screen display functioneMbaddedTM Visual C++ 4.0 *4

（GUI = Graphical User Interface）

RENESAS SH-464MBytes or 128MBytesCompactFlash™ card *4

Monitor

Touch panelPCMCIA x1 slotEthernet (100BASE-TX)USB x2Serial port (RS-232-C) x2At operating: 0℃～58℃At nonoperating: -20℃～60℃

PCI Bus and HSSB for 1 channel

PCI Bus and HSSB for 2 channel

Optical fiber cable

Serial ports are shared by CNC control and Windows control.

Built-in

*8

Remarks

Option

Hardware of HSSB(High Speed Serial Bus) and Required hardware of commercially available personal computer in case of the CNC system which is connected with the personal computer via HSSB(High Speed Serial Bus).

10.4" color TFT LCD (640×480 dots), or 12.1" color TFT LCD (800x600 dots), or15.0" color TFT LCD (1024×768 dots)

Items Specifications

Ports

Hardware of Windows® CE GUI part of incorporated type 300i s/310i s-A5/310i s/320i s

Main memory

Items Specifications Remarks

Development tools

CPU

File memory

Microsoft Corp.

Operating systemExtended library

Microsoft Corp.

Option

RemarksItems Specifications

Software of GUI part in case of the CNC system which is 300i s/310i s-A5/310i s/320i s

Items

Software packages

Connecting cable

Personal computer requirements CPU: Pentium® or morePCI slot 1 or more

Option

Software of personal computer part in case of the CNC system which is 300i /310i -A5/310i /320i or connected with personal computer via HSSB(High Speed Serial Bus)

Development tools

Option

Specifications Remarks

Extended librarySoftware of personal computer part in case

Ambient relative humidity

Ambient temperature of unit

Normally: 10%～75%RH or lessShort term (within one month): 10%～90%RH or less(No dew, nor frost allowed)

For environmental requirements of the personal computer, refer to the manual supplied with the machine.

Personal computer side interface board

MANUAL GUIDE i Simulator for PC

For PCI slot in the personal computerUsing voltage: +5V only

Max. length: 100m

CNC side interface

Option board in case of Display unit incorporated typeBasicaly mounted in case of Display unit separate type

A08B-9010-J540#ZZ11For Windows® 2000/XP PROIncluding a CD-R and a protection uintCurrently only for Milling system

Software of MANUAL GUIDE i Simulator for PCItems Specifications Remarks

02/05 GFTE-585A-EN - 16 -

Hardware of PANEL i used in 300i /310i -A5/310i /320i

Pentium® III, CeleronTM *4Max. 512MBytes 40GBytes

Touch panel

PCMCIA x1 slotFull keyboard x1／Mouse x1Serial (RS-232C) x2／Parallel x1ATAPI x2Floppy disk x1Ethernet (100BASE-TX)USB×2 (rear), USBx1 (front) High-Speed Serial Bus(Optical fiber cable)PCI spec. extension slot(Short card size) x2 *6At operating: 5℃～45℃At nonoperating: -20℃～60℃

Hardware of Display Unit for i s series CNC used in 300i s/310i s-A5/310i s/320i s

RENESAS SH-464MBytes or 128MBytesCompactFlash™ card *4

Monitor *8

Touch panelPCMCIA x1 slotEthernet (100BASE-TX)USB x2At operating: 0℃～58℃At nonoperating: -20℃～60℃

(Note)

*99 : Please ask the sales division the schedule.

Microsoft Corporation. CompactFlash is registered trademark of SanDisk Corporation.

This phenomenon is caused by LCD's structure, and not defects.

*3 : The actual registrable value might changes according to the registered number of programs and the program sizes.*2 : In case of 300i /310i -A5/310i /320i /300i s/310i s-A5/310i s/320i s, this function can not be used.

Each companie's name and product's name is the trademark or registered trademark.

*4 : Intel, Pentium are registered trademarks of Intel Corporation. Celeron is the trademark of Intel Corporation. MIcrosoft, Windows, VIsual Studio, and eMbadded Visual Tools logo are registered trademarks of

Main memory

*9 : Please refer to page 14 for hardware of LCD-mounted type 300 i s/310i s-A5/310i s/320i s.

*5 : A special driver is necessary to display 16 or more colors.*6 : Extension Board for IBM PC should be prepared by MTB.*7 : FOCAS2 = FANUC Open Cnc API Specifications version 2*8 : LCD is manufactured by using high precision technology, however it has points which are always bright or dark.

Ports


Normally: 10%～75%RH or lessShort term (within one month): 10%～90%RH or less(No dew, nor frost allowed)


Touch panel is connected to serial port 1.

Remarks


*1 : There are some limitations in case of 300 i /310i -A5/310i /320i /300i s/310i s-A5/310i s/320i s.

CPU

Option

Built-inFile memory10.4" color TFT LCD (640×480 dots), or 12.1" color TFT LCD (800x600 dots), or 15.0" color TFT LCD (1024×768 dots)

Items

Display Max. 65536 colors *5 *8

10.4" color TFT LCD (640×480 dots), or 12.1" color TFT LCD (800x600 dots), or 15.0" color TFT LCD (1024×768 dots)

Option

CNC interface

SpecificationsItems


Remarks

Ports

Normally: 10%～75%RH or lessShort term (within one month): 10%～90%RH or less(No dew, nor frost allowed) Wet Humidity: 29℃ or less

Monitor

Specifications

Extension slot

*10 : Please refer to page 15 for PANEL i used in 300i /310i -A5/310i /320i and

Max. length: 50m

Hard disk

Hardware of Display Unit for i s series CNC used in 300 i s/310i s-A5/310i s/320i s.

Main memory

CPU

02/05 GFTE-585A-EN - 17 -

GFTE

-585

A-E

N 02

/200

5

GE Fanuc Automation CNC Europe S.A. • Zone Industrielle • L-6468 Echternach • Grand Duché de Luxembourg Phone: +352 727 979 1 • Fax: +352 727 979 227 • Email: [email protected] • Internet: www.gefanuc-europe.com

Specifications are subject to change without notice • All rights reserved • © 2005 GE Fanuc Automation CNC Europe S.A.

CNC Controllers - Spinner Takım Tezgahları Fabrikası · PDF file ·...

Documents

Transcript of CNC Controllers - Spinner Takım Tezgahları Fabrikası · PDF file ·...