1/2 ... ......TITLE

CONTRACTOR Nº

1.6 Valve pattern (as per Table 4.2 of API 6D 21st Edition) -

1.10 Position indicator yes/no no

2.8 Gasket material and grade -

2.6 Coating standard adhered to -

2.7O-rings and gaskets / packing material to be physically and chemically resistant to process media -

2.4 Plug coating type -

2.5 Plug coating thickness μm

2.2 Trim - Non-corrosive and Non-erosive stainless steel

2.3Plug to be coated with a friction reducing, corrosion inhibiting material. yes/no yes

2 MATERIAL OF CONSTRUCTION2.1 Body / Bonnet - Cast Steel to API SPEC 6D-Latest

1.14Stem details -

Stem to be of anti blow-out design. Stem and Plug shall be two separate components.

1.15Plug details - Floating type with metal to metal

seat.

1.12 Fire safe design to API 6FA / API 607 / BS 6755 Part 2 yes/no yes

1.13 Stem sealing injector for emergency stem sealing yes/no yes

1.9 Operation (Actuator operated / Manually operated) - Manual (via lever or gearbox, lever to be included)

1.11 Compliance to API 599 yes/no yes

1.7 Face to Face Distance mm To API 6D

1.8Connection type (Flanged/ Welded/ Threaded) -

Flanged (ASME B16.5, raised face, integrally cast for forged flange ends)

1.4 Pressure Class lbs 150

1.5 Nominal Size DN mm 50

1.2 Model/ Series Classification -

1.3 Valve type - pressure balanced lubricated inverted taper plug

1 VALVE DETAILS

1.1 Manufacturer -

Identification (TAG): AU055, OC904 Quantity: 2

Item Description un. Specified Proposed

Instructions on Filling Out This Form

I - Potential Suppliers should fill out the left column of the "Proposed" field with one of the following options: "MR" (Meets Requirements) or "D" (Deviation).

II - Suppliers must list any items marked "D" and any other clarifications in the "Deviations List", of the Technical Requisition. To include information in addition to the contents of this datasheet, suppliers should proceed in the same manner.III - The explanatory notes at the end of the Data Sheet are to be filled out by the Issuer and not by Suppliers.

Supplier: Proposal:

i. Scope This datasheet covers Transnet Pipelines’ requirements for a lubricated taper plug valveThe valve is to be suitable for installation in the horizontal, vertical or inclined position.Operating temperature will not exceed 45 degrees C.This specification must be read in conjunction with Transnet Pipeline Specification PL2/Latest - General Specification - steel valves for petroleum product service.

2015-05-21T0 TENDER ISSUE FS DM NdS

T0

Rev. Revision Description By REV. APP. Aut. Date

Secunda LP & HP Manifold Upgrade

CLIENT Nº PAGETRANSNET PIPELINES- SECUNDALP AND HP MANIFOLD SYSTEMSEQUIPMENT TECHNICAL DATASHEETSPLUG VALVE DATA SHEET

REV.

109842-3000-DST-MM-0008

2/2 ... ......TITLE

CONTRACTOR Nº

T0

Secunda LP & HP Manifold Upgrade

CLIENT Nº PAGETRANSNET PIPELINES- SECUNDALP AND HP MANIFOLD SYSTEMSEQUIPMENT TECHNICAL DATASHEETSPLUG VALVE DATA SHEET

REV.

109842-3000-DST-MM-0008

Explanatory Notes01 - Supplier shall refer to reference documents listed on the requisition to complete equipment specification.02 - Supplier shall confirm and/or provide all equipment data while filing the proposed column.REFERENCE DOCUMENTSTransnet Specification PL217/D - Taper Plug Valve Lubricated for Petroleum Product Service

5.4 Assembly delivery time Weeks

5.2 Pressure testing cost per unit ZAR5.3 Cost per actuator ZAR

5 FINANCIAL DETAILS5.1 Cost per unit ZAR

4.2 Main dimensions of valve (L x W x H) mm4.3 Life expectancy (# open/close cycles) No

4 GENERAL DETAILS

4.1 Total weight of valve (valve and actuator) kg

3.2 Sealant type - To be compatible with process media

3.3 Frequency and quantity of lubrication -

3 LUBRICATION

3.1

Sealant injection fittings -

Combination lubricator type to fit a giant button head type coupler. Buried check valve installed in front of the sealant injection fitting.

2.9 Packing material and grade -