Background on TCTPs R. Bruce

4
Background on TCTPs R. Bruce

description

Background on TCTPs R. Bruce. Background. TCTP: tertiary collimators with integrated BPM buttons Gain: Drastically reduced TCT setup time (gain of a factor ~100) => more flexibility in IR configuration Reduce orbit margins in cleaning hierarchy => more room to squeeze β* - PowerPoint PPT Presentation

Transcript of Background on TCTPs R. Bruce

Page 1: Background on TCTPs R.  Bruce

Background on TCTPs

R. Bruce

Page 2: Background on TCTPs R.  Bruce

2

BPM buttonsCourtesy O. Aberle, A. Bertarelli, F.

Carra, A. Dallocchio, L. Gentini et al.

Background

• TCTP: tertiary collimators with integrated BPM buttons

• Gain: • Drastically reduced TCT setup time (gain of a factor ~100) => more

flexibility in IR configuration

• Reduce orbit margins in cleaning hierarchy => more room to squeeze β*

• LHC installation scheduled to start in March 2014, production later this year

R. Bruce, 2013.04.22

Page 3: Background on TCTPs R.  Bruce

CWG October 1st 2012

• From minutes: “The ferrite thermal characteristics after the present thermal treatment are too tight for the LHC vacuum requirements. At room temperature the outgassing flow is above 1e-10 mbar* L/s*cm2. If temperature increases from room temperature to 50 C the outgassing ow is doubled. If temperature increased from 50 C to 100C the outgassing ow is increased by a factor of 10. The present solution is within the limits of LHC acceptance but there is not any safety margin. The VSC proposal a vacuum test of ferrite with increase thermal treatment.”

R. Bruce, 2013.04.22

Page 4: Background on TCTPs R.  Bruce

Today’s meeting

• Today’s CWG: updates on impedance, and heating and outgassing after new thermal treatment. What can we conclude on the choice of ferrites? Is any other input needed?

R. Bruce, 2013.04.22