2 LCA- 10 0 0 D - B 10K L8 P - TOKYO KO-ON DENPA … · TKD MANUAL FADERS TOKYO KO-ON DENPA CO..LTD...
2
Copyright(C) 2003 TOKYO KO-KON DENPA CO.,LTD. ALL right reserved. TKD TOKYO KO-ON DENPA CO..LTD Specifications Total Resistance 1KΩ~1MΩ Total Resistance Tolerance ±20% (±30 at More Than 1MΩ) Resistance Taper A, B, C, D Rated Power 0.1W at Taper B, 0.05W at The Others Max. Operating Voltage 200V at Taper B, 150V at The Others Residual Resistance Less Than 15Ω at 10KΩ or Less Less Than 30Ω at 10KΩ~50kΩ Less Than 0.1% of Resistance Value at 50KΩ or More Sliding Noise Max. 47mV Insulation Resistance 100MΩ or More at DC 500V Withstand Voltage 1minute at AC 500V Operating Force 0.03Ncm ~ 0.1Ncm Sliding Life 100,000 Cycles or More Numbering System 2 LCA- 10 0 0 D - B 10K L8 P Lever Length Travel 10: 100mm 60: 60mm 45: 45mm Operating Force 0: 0.03 ~ 0.1Ncm 1: 0.1 ~ 0.3Ncm Terminal Types P: For PC L: For Lead Wiring Lever Type (See Below) Taper With Dust Cover Total Resistance Value Blank: Single Unit 2: Dual Unit MANUAL FADERS LCA SERIES
Transcript of 2 LCA- 10 0 0 D - B 10K L8 P - TOKYO KO-ON DENPA … · TKD MANUAL FADERS TOKYO KO-ON DENPA CO..LTD...
Copyright(C) 2003 TOKYO KO-KON DENPA CO.,LTD. ALL right reserved.
TKD TOKYO KO-ON DENPA CO..LTD
SpecificationsTotal Resistance 1KΩ~1MΩTotal Resistance Tolerance ±20% (±30 at More Than 1MΩ)Resistance Taper A, B, C, DRated Power 0.1W at Taper B, 0.05W at The OthersMax. Operating Voltage 200V at Taper B, 150V at The OthersResidual Resistance Less Than 15Ω at 10KΩ or Less Less Than 30Ω at 10KΩ~50kΩ Less Than 0.1% of Resistance Value at 50KΩ or MoreSliding Noise Max. 47mVInsulation Resistance 100MΩ or More at DC 500VWithstand Voltage 1minute at AC 500VOperating Force 0.03Ncm ~ 0.1NcmSliding Life 100,000 Cycles or More
Numbering System
2 LCA- 10 0 0 D - B 10K L8 PLever Length
Travel 10: 100mm 60: 60mm 45: 45mm
Operating Force 0:0.03 ~ 0.1Ncm 1: 0.1 ~ 0.3Ncm
Terminal Types P: For PC L: For Lead Wiring
Lever Type (See Below)
TaperWith Dust Cover
Total Resistance Value
Blank:Single Unit 2:Dual Unit
MANUAL FADERS
LCA SERIES
Copyright(C) 2003 TOKYO KO-KON DENPA CO.,LTD. ALL right reserved.
TKD TOKYO KO-ON DENPA CO..LTDMANUAL FADERS
Dimensions
LCA-4500
LCA-6000
LCA-1000
Soldering of terminals to be made less than at 350 Cwithin FIVE SECONDS MAX.
Soldering of terminals to be made less than at 350 Cwithin FIVE SECONDS MAX.
Soldering of terminals to be made less than at 350 Cwithin FIVE SECONDS MAX.
