NORSOK M-501 coating systems

Product DFT (μm)Hempadur 15590 201

Hempadur Spray-Guard 35493 3000Total 3020

Product DFT (μm)Hempadur Multi-Strength 35620 300Hempadur Multi-Strength 35620 300Total 600

Product DFT (μm)Hempadur 35560 300Hempadur 35560 300Total 600

Product DFT (μm)Hempadur Multi-Strength 35460 300Hempadur Multi-Strength 35460 300Total 600

Product DFT (μm)Hempadur 15590 50Hempadur Multi-Strength 35460 300Hempadur Multi-Strength 35460 300Total 650

Product DFT (μm)Hempadur Multi-Strength 35620 275Hempadur Multi-Strength 35620 275Hempathane HS 55610 60Total 610

Product DFT (μm)Hempadur Multi-Strength 45703 300Hempadur Multi-Strength 45753 300Hempathane HS 55610 60Total 660

System 7A: Carbon and stainless steel in the splash zonePre-qualification is required

System 7Submerged carbon and stainless steel including the splash zone

Note 1: According to ISO 19840Note 2: Avantguard® is a registered trademark of Hempel A/S

Product DFT (μm)Hempadur Avantguard 770 60Hempadur Multi-Strength 35620 240Hempadur Multi-Strength 35620 240Hempathane HS 55610 60Total 600Product DFT (μm)

Hempadur Avantguard 770 60Hempadur 35560 240Hempadur 35560 240Hempathane HS 55610 60Total 600

NORSOK M-501 coating systems

Note 1: Only prequalified in aluminium shades.

Note 2: Systems approved for System 7A shall also meet the requirements for System 7B if applied at the film thickness for which System 7A approval was granted.

Note 1: Pre-qualified for steel temperature up to 150ºC/300ºF.

Product DFT (μm)Hempadur Multi-Strength 45703 175Hempadur Multi-Strength 45753 175Total 350

Product DFT (μm)Hempadur 85671 1 125Hempadur 85671 125Hempadur 85671 100Total 350

Product DFT (μm)Hempadur Quattro XO 17720 1 175Hempadur Quattro XO 17720 175Total 350

Product DFT (μm)Hempadur 15590 50Hempadur Multi-Strength 35840 300Total 350

System 7B: Submerged carbon and stainless steel ≤ 50°C/122°F Pre-qualification is required

System 7C: Submerged carbon and stainless steel > 50°C/122°F Pre-qualification is required

System 7A: Carbon and stainless steel in the splash zone continuedPre-qualification is required

Product DFT (μm)Hempadur Multi-Strength 35840 300Hempadur Multi-Strength 35840 300Total 600

Product DFT (μm)Hempadur Multi-Strength 35842 750Hempadur Multi-Strength 35842 750Total 1500

Product DFT (μm)Hempadur Avantguard 770 60Hempadur Multi-Strength 45753 240Hempadur Multi-Strength 45753 240Hempathane HS 55610 60Total 600

Hempel A/S Lundtoftegaardsvej 91, 2800 Kgs. Lyngby, DenmarkTel: +45 4593 3800 Email: norsok@hempel.com norsok.hempel.com

V3_DEC_19

For advice on regional product availability and additional schemes, please contact your local Hempel representative or email protective@hempel.com