Κ.Δ.Π. 250/2018
ΕΠΙΣΗΜΗ ΕΦΗΜΕΡΙΔΑ
ΤΗΣ ΚΥΠΡΙΑΚΗΣ ΔΗΜΟΚΡΑΤΙΑΣ
ΠΑΡΑΡΤΗΜΑ ΤΡΙΤΟ
ΜΕΡΟΣ Ι ΚΑΝΟΝΙΣΤΙΚΕΣ ΔΙΟΙΚΗΤΙΚΕΣ ΠΡΑΞΕΙΣ
Αριθμός 5108 Παρασκευή, 24 Αυγούστου 2018 1491
Αριθμός 250
Ο ΠΕΡΙ ΠΟΛΕΟΔΟΜΙΑΣ ΚΑΙ ΧΩΡΟΤΑΞΙΑΣ ΝΟΜΟΣ (ΝΟΜΟΙ 90 ΤΟΥ 1972, 56 ΤΟΥ 1982, 7 ΤΟΥ 1990, 28 ΤΟΥ 1991, 91(Ι) ΤΟΥ 1992, 55(Ι) ΤΟΥ 1993, 72(Ι) ΤΟΥ 1998,
59(Ι) ΚΑΙ 142(Ι) ΤΟΥ 1999, 241(Ι) ΤΟΥ 2002, 29(Ι) ΤΟΥ 2005, 135(Ι) ΤΟΥ 2006, 11(Ι) ΤΟΥ 2007, 46(I), 76(Ι), 130(Ι) ΚΑΙ 164(Ι) ΤΟΥ 2011, 33(Ι), 110(I) ΚΑΙ 150(Ι) TOY 2012, 20 (Ι) ΚΑΙ 65(Ι) ΤΟΥ 2013,
120(Ι) ΤΟΥ 2014, 39(Ι) ΤΟΥ 2015, 134(Ι) ΤΟΥ 2015 ΚΑΙ 24(Ι) ΤΟΥ 2016) ____________________
Διάταγμα σύμφωνα με το άρθρο 35(1)
Το Υπουργικό Συμβούλιο, ενασκώντας τις εξουσίες που παρέχονται σε αυτό με βάση το άρθρο 35(1) του περί Πολεοδομίας και Χωροταξίας Νόμου, καθορίζει ως Λευκή Ζώνη την περιοχή που προσδιορίζεται στο σχέδιο με αρ. ΤΡΗ 641/2018 της κοινότητας Πισσουρίου, για σκοπούς περιορισμού της οικοδομικής ανάπτυξης, λόγω της αστάθειας και του αυξημένου βαθμού επικινδυνότητας του εδάφους τοπικά. Οι χρήσεις που υφίστανται στην καθορισμένη Λευκή Ζώνη θα παραμείνουν γενικά αμετάβλητες και οποιαδήποτε οικοδομική εργασία ή δραστηριότητα θα τερματισθεί.
Το σχέδιο με αρ. ΤΡΗ 641/2018, στο οποίο προσδιορίζεται η καθοριζόμενη Λευκή Ζώνη στη διοικητική περιοχή Πισσουρίου της Επαρχίας Λεμεσού, υπογράφεται από τη Διευθύντρια του Τμήματος Πολεοδομίας και Οικήσεως και είναι διαθέσιμο για επιθεώρηση από κάθε ενδιαφερόμενο, κατά τις εργάσιμες ημέρες και ώρες, στα Κεντρικά και το Επαρχιακό Γραφείο Λεμεσού του Τμήματος Πολεοδομίας και Οικήσεως, στα Γραφεία της Επαρχιακής Διοίκησης Λεμεσού και στα Γραφεία του Κοινοτικού Συμβουλίου Πισσουρίου.
Το παρόν Διάταγμα ισχύει μέχρι τις 25.8.2020. ____________________
Έγινε στις 12 Ιουλίου 2018. (Υ.Ε. 5.33.23.7.4/2)
Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 251/2018 Αρ. 5108, 24.8.2018 Αριθμός 251
ΟΙ ΠΕΡΙ ΤΥΠΟΠΟΙΗΣΗΣ, ΔΙΑΠΙΣΤΕΥΣΗΣ ΚΑΙ ΤΕΧΝΙΚΗΣ ΠΛΗΡΟΦΟΡΗΣΗΣ ΝΟΜΟI ΤΟΥ 2002 ΕΩΣ 2012
____________________
Γνωστοποίηση βάσει του Άρθρου 5 του Βασικού Νόμου 156(Ι)/2002 και του Άρθρου 6 του Τροποποιητικού Νόμου 57(Ι)/2011
Με το παρόν γνωστοποιείται ότι βάσει των Άρθρων 5 του βασικού Νόμου 156(Ι) του 2002 και 6 του τροποποιητικού
Νόμου 57(Ι)/2011 που ρυθμίζουν τις δραστηριότητες της Τυποποίησης, Διαπίστευσης και Τεχνικής Πληροφόρησης, ο Κυπριακός Οργανισμός Τυποποίησης (CYS) δημοσιεύει ως Κυπριακά πρότυπα τα πιο κάτω Ευρωπαϊκά πρότυπα:
STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN)
01 Generalities. Terminology. Standardization. Documentation
CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 10318-1:2015 /A1:2018
Geosynthetics - Part 1: Terms and definitions – Amendment 1 (ISO 10318-1:2015/Amd 1:2018) 01.040.59
CYS EN ISO 10318-2:2015 /A1:2018
Geosynthetics - Part 2: Symbols and pictograms – Amendment 1 (ISO 10318-2:2015/Amd 1:2018) 01.080.99
CYS EN 16510-1:2018
Residential solid fuel burning appliances - Part 1: General requirements and test methods 01.040.91
S/S CYS EN 12809:2001-iss2, CYS EN 12815:2001 -iss2, CYS EN 13229: 2001-iss3, CYS EN 13240:2001-iss1=W/D
CYS EN 9300-115:2018
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 115: Explicit CAD assembly structure
01.110
CYS EN 9300-100:2018
Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 100: Common concepts for Long term archiving and retrieval of CAD 3D mechanical information
01.110
03 Services. Company organization, management and quality. Administration. Transport. Sociology
CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 17427-1:2018
Intelligent transport systems - Cooperative ITS - Part 1: Roles and responsibilities in the context of co-operative ITS architecture(s) (ISO 17427-1:2018)
03.220.01
S/S CYS CEN ISO/TS 17427:2014=W/D
CYS CEN/TR 17017-101:2018
Electronic public procurement - Business interoperability interfaces (BII), e-Fulfilment - Part 101: Overview 03.100.10
CYS CEN/TR 17016-101:2018
Electronic public procurement - Business interoperability interfaces (BII), e-Ordering - Part 101: Overview 03.100.10
1492
CYS EN 9115:2018
Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100)
03.100.70 S/S CYS EN 9115:2013 =W/D
CYS EN ISO 19011:2018 Guidelines for auditing management systems (ISO 19011:2018) 03.100.70
S/S CYS EN ISO 19011:2011=W/D
07 Natural and applied sciences
CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 18593:2018
Microbiology of the food chain - Horizontal methods for surface sampling (ISO 18593:2018) 07.100.30
11 Health care technology
CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 10477:2018
Dentistry - Polymer-based crown and veneering materials (ISO 10477:2018) 11.060.10
S/S CYS EN ISO 10477:2004=W/D
CYS EN ISO 7494-1:2018
Dentistry - Stationary dental units and dental patient chairs - Part 1: General requirements (ISO 7494-1:2018) 11.060.20
S/S CYS EN ISO 6875:2011, CYS EN ISO 7494-1:2011=W/D
CYS CEN/TS 16826-3:2018
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 3: Isolated DNA
11.100.10
CYS EN ISO 20696:2018 Sterile urethral catheters for single use (ISO 20696:2018) 11.040.25
S/S CYS EN 1616:1997 and A1:1999 =W/D
CYS EN ISO 20697:2018
Sterile drainage catheters and accessory devices for single use (ISO 20697:2018) 11.040.25
S/S CYS EN 1617:1997 =W/D
CYS EN ISO 11070:2014 /A1:2018
Sterile single-use intravascular introducers, dilators and guidewires - Amendment 1 (ISO 11070:2014/Amd 1:2018) 11.040.25
13 Environment. Health protection. Safety
CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 1716:2018
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018) 13.220.50
S/S CYS EN ISO 1716:2010 =W/D
CYS EN ISO 374-1:2016 /A1:2018
Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/Amd 1:2018)
13.340.40
1493
CYS EN 12285-1:2018
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings
13.300 S/S CYS EN 12285-1:2003=W/D
CYS EN 13317:2018
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly 13.300
S/S CYS EN 13317:2002 +A1:2006 =W/D
CYS EN 14025:2018
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction 13.300
S/S CYS EN 14025:2013 +A1:2016 =W/D
CYS EN 12972:2018
Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks 13.300
S/S CYS EN 12972:2015 =W/D
CYS EN ISO 17892-12:2018
Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits (ISO 17892-12:2018)
13.080.20
S/S CYS CEN ISO/TS 17892-12:2004 and AC:2005=W/D
CYS EN ISO 15952:2018
Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination (ISO 15952:2018)
13.080.30
S/S CYS EN ISO 15952:2011 =W/D
CYS EN ISO 23611-1:2018
Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and extraction of earthworms (ISO 23611-1:2018) 13.080.05
S/S CYS EN ISO 23611-1:2011=W/D
21 Mechanical systems and components for general use
CYS EN Document: Title ICS1 Withdrawn
CYS EN 14399-7:2018
High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies 21.060.01
S/S CYS EN 14399-7:2007=W/D
CYS EN 14399-8:2018
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies 21.060.01
S/S CYS EN 14399-8:2007=W/D
23 Fluid systems and components for general use
CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 3949:2018
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2018) 23.040.70
S/S CYS EN ISO 3949:2014 =W/D
25 Manufacturing engineering CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 15612:2018
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2018)
25.160.10
S/S CYS EN ISO 15612:2004 =W/D
1494
CYS EN ISO 10042:2018
Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2018) 25.160.40
S/S CYS EN ISO 10042:2005 and AC:2006 =W/D
35 Information technology
CYS EN Document: Title ICS1 Withdrawn
CYS EN 419241-1:2018
Trustworthy Systems Supporting Server Signing - Part 1: General System Security Requirements 35.030
S/S CYS CEN/TS 419241 :2014=W/D
45 Railway engineering
CYS EN Document: Title ICS1 Withdrawn
CYS EN 14067-6:2018
Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment 45.060.01
S/S CYS EN 14067-6:2010=W/D
49 Aircraft and space vehicle engineering CYS EN Document: Title ICS1 Withdrawn
CYS EN 2279:2018
Aerospace series - Steel FE-PM37 - 900 MPa ≤ Rm ≤ 1 100 MPa - Forgings - De ≤ 150 mm 49.025.10
CYS EN 2280:2018
Aerospace series - Steel FE-PM37 - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheet - a ≤ 6 mm 49.025.10
CYS EN 2319:2018
Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a ≤ 75 mm 49.025.20
CYS EN 2387:2018
Aerospace series - Aluminium alloy 2014A- - T6 - Tubes for structures - 0,6 mm ≤ a ≤ 12,5 mm 49.025.20
CYS EN 2799:2018
Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD 49.025.40
CYS EN 4510:2018
Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001, adapters, straight, double end, with locking ring 49.080
CYS EN 4641-001:2018
Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification 49.060
S/S CYS EN 4641-001:2009 =W/D
CYS EN 4832:2018
Aerospace series - Adaptor, Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting and Ring-locked fitting-reducer - Inch Series - Technical specification
49.080
CYS EN 4833:2018
Aerospace series - Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting - Flareless End - Inch Series - Extra Fine Thread Pitch
49.080
CYS EN 3745-505:2018
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength 49.090
S/S CYS EN 3745-505:2007 =W/D
CYS EN 4838-004:2018
Aerospace series - Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency - Part 004: With signal contact - Product standard
49.060
1495
53 Materials handling equipment CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 7590:2018
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2018) 53.040.20
S/S CYS EN ISO 7590:2009 =W/D
59 Textile and leather technology CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 4098:2018
Leather - Chemical tests - Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter (ISO 4098:2018)
59.140.30
S/S CYS EN ISO 4098:2006 =W/D
CYS EN ISO 4048:2018
Leather - Chemical tests - Determination of matter soluble in dichloromethane and free fatty acid content (ISO 4048:2018) 59.140.30
S/S CYS EN ISO 4048:2008 =W/D
CYS EN ISO 5398-1:2018
Leather - Chemical determination of chromic oxide content - Part 1: Quantification by titration (ISO 5398-1:2018) 59.140.30
S/S CYS EN ISO 5398-1:2007=W/D
CYS EN ISO 5398-3:2018
Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry (ISO 5398-3:2018)
59.140.30 S/S CYS EN ISO 5398-3:2007=W/D
61 Clothing industry CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 17708:2018
Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2018) 61.060
S/S CYS EN ISO 17708:2003=W/D
71 Chemical technology CYS EN Document: Title ICS1 Withdrawn
CYS EN 13704:2018
Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1)
71.100.35 S/S CYS EN 13704:2002=W/D
75 Petroleum and related technologies CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 15138:2018
Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2018)
75.180.10
S/S CYS EN ISO 15138:2007=W/D
1496
CYS EN ISO 10855-1:2018
Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018)
75.180.10 S/S CYS EN 12079-1:2006=W/D
CYS EN ISO 10855-2:2018
Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2018) 75.180.10
S/S CYS EN 12079-2:2006=W/D
CYS EN ISO 10855-3:2018
Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018) 75.180.10
S/S CYS EN 12079-3:2006=W/D
CYS EN 17155:2018
Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber
75.160.20
CYS EN ISO 4264:2018
Petroleum products - Calculation of cetane index of middle-distillate fuels by the four variable equation (ISO 4264:2018) 75.160.20
S/S CYS EN ISO 4264:2007 and A1:2013 =W/D
CYS EN 16726:2015 +A1:2018
Gas infrastructure - Quality of gas - Group H 75.060 S/S CYS EN 16726:2015=W/D
77 Metallurgy CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 16151:2018
Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions (ISO 16151:2018)
77.060
S/S CYS EN ISO 16151:2008=W/D
CYS EN ISO 3923-1:2018
Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2018) 77.160
S/S CYS EN ISO 3923-1:2010=W/D
CYS EN ISO 4957:2018 Tool steels (ISO 4957:2018) 77.140.35
S/S CYS EN ISO 4957:2000 =W/D
CYS EN ISO 9443:2018
Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018) 77.140.10
S/S CYS EN 10221:1996=W/D
81 Glass and ceramics industries CYS EN Document: Title ICS1 Withdrawn
CYS EN 1279-6:2018
Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests 81.040.20
S/S CYS EN 1279-6:2002=W/D
CYS EN 1279-3:2018
Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
81.040.20 S/S CYS EN 1279-3:2002=W/D
CYS EN 1279-4:2018
Glass in Building - Insulating Glass Units - Part 4: Methods of test for the physical attributes of edge seal components and inserts 81.040.20
S/S CYS EN 1279-4:2002=W/D
CYS EN 1279-5:2018 Glass in building - Insulating glass units - Part 5: Product standard 81.040.20
S/S CYS EN 1279-5:2005 +A2:2010 =W/D
1497
CYS EN 1279-1:2018
Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for substitution, tolerances and visual quality
81.040.20
S/S CYS EN 1279-1:2004 and AC:2006 =W/D
CYS EN 1279-2:2018
Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration 81.040.20
S/S CYS EN 1279-2:2002=W/D
83 Rubber and plastic industries CYS EN Document: Title ICS1 Withdrawn
CYS EN ISO 10927:2018
Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
83.080.01
S/S CYS EN ISO 10927:2011=W/D
CYS EN 15860:2018
Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods 83.080.20
S/S CYS EN 15860:2010=W/D
CYS EN ISO 20557-1:2018
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20557-1:2018)
83.080.20 S/S CYS EN ISO 28941-1:2008=W/D
CYS EN ISO 20557-2:2018
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018)
83.080.20 S/S CYS EN ISO 15103-2:2007=W/D
91 Construction materials and building
CYS EN Document: Title ICS1 Withdrawn
CYS EN 1090-4:2018
Execution of steel structures and aluminium structures - Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications
91.010.30
CYS EN 16236:2018
Assessment and Verification of the Constancy of Performance (AVCP) of aggregates - Type testing and Factory Production Control
91.100.15
CYS CEN/TS 17195:2018
Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates 91.100.01
CYS CEN/TS 17196:2018
Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances
91.100.01
CYS CEN/TS 17197:2018
Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES)
91.100.01
CYS CEN/TS 17200:2018
Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Mass Spectrometry (ICP-MS)
91.100.01
CYS CEN/TS 17201:2018
Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests
91.100.01
1498
97 Domestic and commercial equipment. Entertainment. Sports
CYS EN Document: Title ICS1 Withdrawn
CYS CEN/TR 17207:2018
Playground and recreational areas - Framework for the competence of playground inspectors 97.200.40
CYS CEN/TR 13387-3:2018
Child care articles - General safety guidelines - Part 3: Mechanical hazards 97.190
S/S CYS CEN/TR 13387-3:2015=W/D
CYS CEN/TR 13387-2:2018
Child care articles - General safety guidelines - Part 2: Chemical hazards 97.190
S/S CYS CEN/TR 13387-2:2015=W/D
ΔΙΟΡΘΩΣΕΙΣ ΣΕ ΠΡΟΗΓΟΥΜΕΝΕΣ ΕΚΔΟΣΕΙΣ
CYS EN Document: Title
Modifications
CYS EN 13445:2014
Unfired pressure vessels - Part 5: Inspection and testing
The following pages have been corrected: 4, 5, 6, 77
CYS EN 13445-6:2014
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
The following pages have been corrected: 4, 5, 6, 31, 53
CYS EN 13445-8:2014
Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
The following pages have been corrected: 4, 5, 25
CYS EN 13445-3:2014 Unfired pressure vessels - Part 3: Design The following pages have been corrected:
3, 4, 6, 7, 52, 126, 329 to 334c, 447, 864
CYS EN 13445-1:2014 Unfired pressure vessels - Part 1: General
The following pages have been corrected: 2, 3, 4, 6, 7, 8, 9, 11a, 11b, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 21a, 21b, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 35a, 35b, 35c, 35d, 35e, 36, 37, 37a, 37b, 37c, 38, 39, 40
CYS EN 13445-2:2014 Unfired pressure vessels - Part 2: Materials The following pages have been corrected:
3, 4, 5,6, 13, 15, 28, 58, 81, 83
CYS EN 13445-4:2014 Unfired pressure vessels - Part 4: Fabrication The following pages have been corrected:
4, 5, 6, 67
CYS EN 13684:2018
Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
The superseding note in the European forward been corrected to read "EN 13684:2004+A3:2009" instead of "EN 13684:2004+A3:2019"
CYS EN 16844:2017 +A1:2018
Aesthetic medicine services - Non-surgical medical treatments
The reference and implementation dates have been updated in the European Foreword.
CYS EN ISO 16147:2018
Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components (ISO 16147:2018)
Annex ZA has been added in English and French versions.
CYS EN ISO 6892-2:2018
Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018)
Serbia has been added in the European foreword of EN ISO 6892-2:2018 (English version).
1499
ΤΡΟΠΟΠΟΙΗΣΕΙΣ / CORRIGENDA
CYS EN 16755:2017/AC:2018
Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
CYS EN 12814-4:2018/AC:2018 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test
CYS CEN/TS 16931-3-2:2017/AC:2018
Electronic invoicing - Part 3-2: Syntax binding for ISO/IEC 19845 (UBL 2.1) invoice and credit note
ΑΛΛΕΣ ΕΚΔΟΣΕΙΣ
CWA 17316:2018 Smart CE marking for construction products
ΑΠΟΣΥΡΣΗ ΠΡΟΤΥΠΟΥ H περίοδος συνύπαρξης του προτύπου CYS EN 1177:2008 με τίτλο Impact attenuating playground surfacing - Determination of critical fall height με την νεότερη έκδοση CYS EN 1177:2018 έχει λήξει στις 31.7.2018. Από την 1.8.2018 ισχύει μόνο η έκδοση του 2018 αφού η έκδοση του 2008 έχει αποσυρθεί.
1500
Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 252/2018 Αρ. 5108, 24.8.2018 Αριθμός 252
ΟΙ ΠΕΡΙ ΤΥΠΟΠΟΙΗΣΗΣ, ΔΙΑΠΙΣΤΕΥΣΗΣ ΚΑΙ ΤΕΧΝΙΚΗΣ ΠΛΗΡΟΦΟΡΗΣΗΣ ΝΟΜΟI ΤΟΥ 2002 ΕΩΣ 2012
____________________
Γνωστοποίηση βάσει του Άρθρου 5 του Βασικού Νόμου 156(Ι)/2002 και του Άρθρου 6 του Τροποποιητικού Νόμου 57(Ι)/2011
Με το παρόν γνωστοποιείται ότι βάσει των Άρθρων 5 του βασικού Νόμου 156(Ι) του 2002 και 6 του τροποποιητικού
Νόμου 57(Ι)/2011 που ρυθμίζουν τις δραστηριότητες της Τυποποίησης, Διαπίστευσης και Τεχνικής Πληροφόρησης, ο Κυπριακός Οργανισμός Τυποποίησης (CYS) δημοσιεύει ως Κυπριακά πρότυπα τα πιο κάτω Ευρωπαϊκά πρότυπα:
STANDARDS FROM EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC)
13 Environment. Health protection. Safety
CYS EN Document: Title ICS1 Withdrawn
CYS EN IEC 62046:2018
Safety of machinery - Application of protective equipment to detect the presence of persons 13.110
S/S CYS CLC/TS 62046:2008=W/D
CYS CLC/TR 50625-6:2018
Collection, logistics & treatment requirements for WEEE - Part 6: Report on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614
13.030.99
17 Metrology and measurement. Physical phenomena
CYS EN Document: Title ICS1 Withdrawn
CYS EN IEC 60404-6:2018
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
17.220.20 S/S CYS EN 60404-6:2003=W/D
CYS EN IEC 60404-8-11:2018
Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state
17.220.20
CYS EN IEC 60404-16:2018
Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
17.220.20
29 Electrical engineering
CYS EN Document: Title ICS1 Withdrawn
CYS EN IEC 60079-0:2018 Explosive atmospheres - Part 0: Equipment - General requirements 29.260.20
S/S CYS EN 60079-0:2012 and A11:2013 =W/D
CYS EN 50341-2-9:2017 /A1:2018
Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012)
29.240.20
1501
31 Electronics
CYS EN Document: Title ICS1 Withdrawn
CYS EN IEC 62610-2:2018
Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling
31.240
CYS EN IEC 61837-2:2018
Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures
31.140
S/S CYS EN 61837-2:2011 and A1:2014 =W/D
33 Telecommunications. Audio and video engineering
CYS EN Document: Title ICS1 Withdrawn
CYS EN IEC 60794-1-31:2018
Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon 33.180.10
CYS EN 50377-14-1:2018
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using EN 60793 2 50 single-mode B1 or B6 fibre for Category C according to EN 61753 1
33.180.20
S/S CYS EN 50377-14-1:2011=W/D
CYS EN 62153-4-7:2016 /A1:2018
Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation aC of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method
33.100.10
CYS EN IEC 61290-4-3:2018
Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
33.180.30 S/S CYS EN 61290-4-3:2015=W/D
87 Paint and colour industries
CYS EN Document: Title ICS1 Withdrawn
CYS EN 50059:2018
Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials 87.100
S/S CYS EN 50059:1991=W/D
97 Domestic and commercial equipment. Entertainment. Sports
CYS EN Document: Title ICS1 Withdrawn
CYS EN 50640:2018
Household and similar electric appliances - Methods for measuring the performance of clothes washing machines intended for commercial use
97.060
S/S CYS CLC/TS 50640:2015=W/D
1502
CYS EN 50594:2018
Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended for commercial use 97.060
S/S CYS CLC/TS 50594:2015=W/D
CYS EN 50491-12-1:2018
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart grid - Application specification - Interface and framework for customer - Part 12-1: Interface between the CEM and Home/Building Resource manager - General Requirements and Architecture
97.120
1503
Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 253/2018 Αρ. 5108, 24.8.2018 Αριθμός 253
Ο ΠΕΡΙ ΔΙΚΗΓΟΡΩΝ ΝΟΜΟΣ (ΚΕΦ.2) (όπως τροποποιήθηκε μέχρι σήμερα)
__________________
Γνωστοποίηση δυνάμει του άρθρου 4(δ)(iv)
Το Νομικό Συμβούλιο κατά την ενάσκηση των εξουσιών που του χορηγούνται με το άρθρο 4(δ)(iv) του περί Δικηγόρων Νόμου έχει καθορίσει ότι το Πτυχίο “Bachelor of Arts in Law and Business Administration” του University of Kent, στην Αγγλία, θεωρείται ως πτυχίο νομικής για τους σκοπούς του πιο πάνω άρθρου του εν λόγω Νόμου.
__________________
΄Εγινε την 20ή Αυγούστου 2018.
ΚΩΣΤΑΣ ΚΛΗΡΙΔΗΣ, Γενικός Εισαγγελέας της Δημοκρατίας, Πρόεδρος του Νομικού Συμβουλίου.
1504
Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 254/2018 Αρ. 5108, 24.8.2018 Αριθμός 254
ΟI ΠΕΡΙ ΕΛΕΓΧΟΥ ΤΗΣ ΡΥΠΑΝΣΗΣ ΤΗΣ ΑΤΜΟΣΦΑΙΡΑΣ ΝΟΜΟΙ ΤΟΥ 2002 ΕΩΣ 2018
_______________ Διάταγμα δυνάμει του άρθρου 31Α
187(Ι) του 2002
85(Ι) του 2007 10(Ι) του 2008 79(Ι) του 2009 51(Ι) του 2013
180(Ι) του 2013 114(Ι) του 2018.
Ως Υπουργός Εργασίας, Πρόνοιας και Κοινωνικών Ασφαλίσεων, ασκώντας τις εξουσίες που μου παρέχονται από το άρθρο 31Α των περί Ελέγχου της Ρύπανσης της Ατμόσφαιρας Νόμων του 2002 έως 2018 (στο εξής «ο Νόμος»), εκδίδω το ακόλουθο Διάταγμα:
Συνοπτικός τίτλος. 1. Το παρόν Διάταγμα θα αναφέρεται ως το περί Ελέγχου της Ρύπανσης της Ατμόσφαιρας
(Τροποποίηση του Παραρτήματος ΙΙ του Νόμου) Διάταγμα του 2018. Τροποποίηση του Παραρτήματος ΙΙ του Νόμου.
2. Το Παράρτημα ΙΙ του Νόμου τροποποιείται με την αντικατάσταση της παραγράφου 1.5 αυτού με την ακόλουθη νέα παράγραφο 1.5:
«1.5 Εγκαταστάσεις καύσης με θερμική ισχύ καύσης μεταξύ 1 και 50 MW.».
______________ Έγινε στις 22 Αυγούστου 2018.
ΓΕΩΡΓΙΑ ΑΙΜΙΛΙΑΝΙΔΟΥ,
Υπουργός Εργασίας, Πρόνοιας και Κοινωνικών Ασφαλίσεων
_____________________________________________________________________________________________ Τυπώθηκε στο Τυπογραφείο της Κυπριακής Δημοκρατίας
1445 Λευκωσία, Τηλ.: 22405824, Φαξ: 22303175 - www.mof.gov.cy/gpo Αντίτυπα της Επίσημης Εφημερίδας πωλούνται προς €2,00 το καθένα.
1505
Top Related