Overall Diameter 309 mm / 12.17”

Flange Height 5 mm / 0.20”

Overall Depth 130 mm / 5.12”

Magnet Structure Diameter 152 mm / 5.98”

Gasket(s) Supplied Front & Rear

Baffle Cut-out Diameter 284 mm / 11.18”

Mounting Hole Information 4 x ø8mm on 297 mm PCD

Nett Weight 4.85 Kg / 10.69 lb

Voice Coil Material Copper

Former Material Paper

Magnet Material Ceramic

Chassis Material Pressed Steel

Cone Material Paper

Front Gasket Material Foam

Surround / Edge Termination Paper

Dust Dome Fabric

Connectors Solder Tabs

Fs 70 Hz

Re 7.6 Ω

Le 0.26 mH

L2 0.80 mH

R2 22.5 Ω

Qms 20.3

Qes 0.41

Qts 0.40

Vas 61.8 Litres

Vd 0.077 Litres

Sd 511 cm2

Cms 0.16 mm/N

BL 15.6 T/m

Mms 29.6 g

Xmax / Xlim 1.5 mm / 6 mm

Efficiency % 5.17 %

Nominal Chassis Diameter 12” / 304.8 mm

Impedance 8 / 16 Ω

Power Rating** 70 Watts

Frequency Range 70 Hz - 5 kHz

Sensitivity (1 w - 1 m) 100 dB

Magnet Weight 1.7 Kg / 59 oz

Magnetic Gap Depth 8 mm / 0.31”

Flux Density 1.4 Tesla

Coil Winding Height 11 mm / 0.43”

Voice Coil Diameter 44.45 mm / 1.75”

Understanding all of the subtle elements of amplifier and speaker cabinet behaviour has given Fane a decided engineering edge in developing the all new, Ascension F70. The 12-inch, 70 watt, ceramic magnet driver represents the evolution of a classic tone guitar speaker for players looking for a fresh point of reference.

Promising to be the new most talked about speaker in a generation with its unique ability to enhance the performance of clean low gain amplifiers and high gain shred machines alike. It is just as at home in a classic rear mounted 4x 12 as it is in a modern front mounted application. The F70 offers a stunningly detailed top-end, rich mid-range and warm low-end with an intricate three-dimensional vintage crunch. The beauty of the F70 is that you need not even change your amplifiers setting to appreciate its ability to articulate delicate passages or manage pummelling abuse with ease. Whether your application is a head and cab or an open back combo, the F70 most definitely adds a welcome new dimension to existing rigs.

IMPEDANCE AND FREQUENCY RESPONSE

MATERIALS OF CONSTRUCTIONGENERAL SPECIFICATIONS (8Ω Model) MOUNTING INFORMATION

© 2015 Fane International Ltd. We operate a policy of continuous research and development and as such published specifications are subject to change without notice. 180115

200

50

100

150

200

250

300

+50

+60

+70

+80

+90

+100

+110

50 100 200 500 1k 2k 5k 10k 20k

Ohms (Ω) dB (1W* - 1m)

Hz

Impedance Magnitude

16/12/2014 14:39:59

12-Inch Guitar Loudspeaker// ASCENSION F70

THIELE SMALL PARAMETERS