Waterproofing Systems

2017

WATERPROOFING

PRIMESEAL IMMERSED RAPID First choice for immersed applications

Two component water-based, acrylic modified cement-based, Class 3 waterproofing membrane system that meets the requirements of AS3740 by complying with AS/NZ 4858.

Features • Class 3, high elasticity • Fast drying. Recoat in 1-2 hours @

22ο C & 50% • Can be tiled after 4 hours • Compatible for tiling with Bostik

ASA tile adhesive system • Excellent adhesion to concrete;

rendered masonry; wet area plasterboard; FC sheet & plywood

• Can be applied to damp substrates (provided no free surface water)

• Brush, roller or trowel applied • Designed for commercial and

residential application

RAPID SETTING

CLASS 3, HIGH ELASTICITY

TOTALLY IMMERSIBLE UNDER TILES

Recommended Uses • Under tile to internal wet area • shower, bathroom, kitchen,

laundry & toilet areas • Under tile or other wearing surface

systems to external balconies, rooftops & podium levels

• As an exposed waterproofing • membrane to external applications

subjected to light pedestrian traffic only

• Suitable for concrete; cement, rendered masonry; FC sheeting, water resistant plasterboard and structural plywood

Always read the TDS in the Bostik website before application

PRIMESEAL RAPID Very easy to use rapid setting membrane

One component rapid drying water-based polyurethane, Class 3 waterproofing membrane system that meets the requirements of AS3740 by complying with AS/NZ 4858.

Features • Class 3, high elasticity • Fast drying. Recoat in 1-2 hours • Flood test after 24 hours • Can be tiled after 4-6 hours in non-

critical areas • Compatible for tiling with Bostik

ASA tile adhesive systems • Excellent adhesion to concrete,

rendered, masonry, wet area plasterboard, FC sheet & plywood

• Can be applied to damp substrates • Brush or roller applied • Designed for commercial and

residential application

Recommended Uses • As a waterproofing membrane

under tile to internal wet area, shower, bathroom, kitchen, laundry & toilet areas when installed to AS/NZ 3740

• As a waterproofing membrane under tile or other wearing surface systems to external balconies, rooftops & podium levels

• All applications to be covered by tile or other protective system

• Suitable for concrete; cement rendered masonry; FC sheeting; water resistant plasterboard; and structural plywood

Always read the TDS in the Bostik website before application

RAPID SETTING & EASY TO USE

CLASS 3, HIGH ELASTICITY

INTERIOR & EXTERIOR

SAP CODE NAME SIZE BARCODE

30840502 PRIMESEAL IMMERSED RAPID LIQUID 20L 9310492260686

30840501 PRIMESEAL IMMERSED RAPID POWDER 20KG 9310492260679

SAP CODE NAME SIZE BARCODE

30840503 BOSTIK PRIMESEAL RAPID LIQUID 15L 9310492260693

WATERPROOFING

DAMPFIX GOLD First choice for most waterproofers

One part, highly elastic, Class 3, water-based polyurethane waterproofing membrane system that meets the requirements of AS3740 by complying with AS/NZ 4858. .

Features • Class 3, high elasticity • Early access for following trades • Tile next day in most conditions • May be tiled directly using

approved Bostik ASA tile adhesives • Reinforced with clump free fibers • No mixing • High resistance to detergents &

bleach • Will not re-emulsify after curing • Does not embrittle with age • Can be applied to damp substrates

VERY EASY TO USE

CLASS 3, HIGH ELASTICITY

COMPATIBLE WITH ASA TILING SYSTEM

Recommended Uses • As a waterproofing membrane to

internal wet area shower, bathroom, kitchen, laundry & toilet areas

• As a waterproofing membrane to external balconies, rooftops & podium levels

• All applications to be covered by tile or other surface wearing and protective systems by following trades

• Suitable for concrete; cement • rendered masonry; FC sheeting;

water resistant plasterboard; and structural plywood

DAMPFIX PU Best available moisture cure polyurethane

Moisture cure polyurethane with a long service history in Australian conditions. A popular choice for professional Waterproofers. Complies with AS/NZS 4858 and is classified Class III – High extensibility.

Features • Provides a tough elastomeric

waterproofing membrane when fully cured

• Minimum Dry film thickness achievable in 2 coats

• Will not bleed through porous materials such as marble, natural stone and slate tiles

• Will not re-emulsify when immersed, after full cure

• One component, ready to use • Easy to apply • Excellent bond strength • Reaches sufficient cure in 72 hours

allowing for fast placement of mortar beds & screeds

Recommended Uses • As a waterproofing membrane

under tile to internal wet area, shower, bathroom, kitchen, laundry & toilet areas when installed to AS/NZ 3740

• As a waterproofing membrane under tile or other wearing surface systems to external balconies, rooftops & podium levels

• All applications to be covered by tile or other protective system

• Suitable for concrete; cement rendered masonry; FC sheeting; water resistant plasterboard; and structural plywood

Always read the TDS in the Bostik website before application

RELIABLE PERFORMANCE

CLASS 3, HIGH ELASTICITY

COMPATIBLE WITH ASA SYSTEM

SAP CODE NAME SIZE BARCODE

30800489 DAMPFIX GOLD GOLD 15L 9329431002980

30804399 DAMPFIX GOLD GOLD 4L 9329431002904

30803384 DAMPFIX GOLD GREY 15L 9310492259543

SAP CODE NAME SIZE BARCODE

30603247 DAMPFIX PU 15L 9329431001327

WATERPROOFING

DAMPFIX 3 Good for immersed & trafficability

Two part cement based membrane for internal, external or immersed area waterproofing. Dampfix 3 is fully trafficable as well as being compatible with a range of ASA tile adhesives.

Features • Suitable for immersed applications

in pools, ponds and spas • Class 2, medium elasticity • Fast drying • Tile same day in most conditions • May be tiled directly onto with

approved ASA adhesives • Flood Test in 72 hours • Easy to mix • Reinforced with clump free fibers • High resistance to detergents &

bleach • Will not re-emulsify after curing • Brush, roller or trowel applied.

FOR IMMERSED APPLICATTIONS

CLASS 2, GOOD ELASTICITY

COMPATIBLE WITH ASA TILING SYSTEM

Recommended Uses • As a waterproofing membrane

under tile to internal wet area shower, bathroom, kitchen, laundry & toilet areas when installed to AS/NZ 3740

• As a waterproofing membrane under tile or other wearing surface systems to external balconies, rooftops & podium levels

• As an exposed waterproofing membrane to external applications subjected to light pedestrian traffic only

• Suitable for concrete; cement rendered masonry; FC sheeting; water resistant plasterboard

DAMPFIX BANDAGE Premium reinforcing tape

Dampfix Bandage is a premium reinforcing tape designed to be used with Dampfix waterproofing membranes. It is a high performance bond breaker and joint isolation system.

Features • Puncture resistant reinforced layer • High strength and excellent tear

resistance • Open flexible weave - fast and easy

wetting with maximum bond to substrate

• Preformed options available • Embossed crease for easy fold in

junctions • Useful measurement marks • Printed face is release so

membrane de-bonds easily. • Accommodates movement

Recommended Uses • Resistant to damage by following

trades • Less risk of failure in critical areas • Quicker installation than

traditional sealant+ tape • No need to wait - install

membrane almost immediately • Lower risk of performance /

compliance issues • Sealant is isolated from membrane

so compatibility issues are avoided and preferred sealant may be used

• May be used for joint patching without removing damaged membrane

Always read the TDS in the Bostik website before application

PUNCTURE RESISTANT LAYER

HIGH STRENGTH

ACCOMODATES MOVEMENT

SAP CODE NAME SIZE BARCODE

30840531 DAMPFIX 3 LIQUID 20L 9329431002782

30804460 DAMPFIX 3 POWDER 20KG 9329431002768

WATERPROOFING

SELECTION GUIDE Bostik ASA Waterproofing Solutions

Product Primeseal Immersed Rapid Primeseal Rapid Dampfix Gold Dampfix PU Dampfix 3

AS/NZS 4858 Classification

Class 3 Class 3 Class 3 Class 3 Class 2

Substrate

Render Best Best Best Suitable Suitable

Brick & Block Best Best Best Suitable Suitable

Concrete Best Best Best Suitable Suitable

Plasterboard Best Best Best Suitable Suitable

Fibre Cement Best Best Best Suitable Suitable

Screed Best Best Best Suitable Suitable

Structural Plywood Best Best Best Suitable Suitable

Situation

Internal Wet Areas Suitable Best Best Suitable Suitable

Exterior Best Suitable (covered) Suitable (covered) Suitable (covered) Suitable

Full Immersion (Pools) Best No No No Suitable

Acoustic Mats Suitable Best Best Suitable Suitable

Planter Box / Ground contact No No No No No

Rising damp (negative hydrostatic head)

Use Moisture Seal Use Moisture Seal Use Moisture Seal Use Moisture Seal Use Moisture Seal

Direct UV Exposure Suitable No No No Suitable

Foot trafficable Best No No No Suitable

Direct tiling Yes Yes Yes Specialist Primer required Yes

Installation

Drying Time Very Fast Very Fast Fast Normal Normal

Recoat Time 2hr 2hr 2hr-4hr 24hr 2hr-3hr

Traffic (or Tile) 4-6hr 4-6hr 24hr 72hr 72hr

Flood Test 72hr 72hr 72hr 72hr 72hr

Minimum Wet Film Thickness (floor) 2 x 750 μm 2 x 750 μm 2 x 750 μm 2 x 750 μm 2 x 900 μm

Minimum Wet Film Thickness (wall) 2 x 600 μm 2 x 500 μm 2 x 500 μm 2 x 750 μm 2 x 900 μm

Primer to bond waterproofing membrane to substrate

Multiprime or PrimeGrip Non-Porous

Multiprime or PrimeGrip Non-Porous

Multiprime or PrimeGrip Non-Porous

Moisture Seal or N40 Primer Multiprime or PrimeGrip Non-

Porous

Primer to tile to waterproofing membrane

Not required Not required Not required Specialist Primer Not required

Properties

Overall Performance Superb Superb Excellent Excellent Good

Application Properties Superb Superb Excellent Excellent Good

Application Brush, roller,

trowel, airless spray

Brush, roller, trowel,

airless spray

Brush, roller, trowel,

airless spray

Brush, roller, squeegee

Brush, roller, trowel,

airless spray

Penetration Resistance Superb Excellent Good Excellent Good

Elongation > 300% > 800 % > 1,200% > 600% 200 - 299%

Chemical Resistance (AS4858) Superb Superb Superb Good Good

Strength Gain Very Fast Very Fast Fast Fast Standard

Colour Grey Light blue Gold & Grey Grey Grey

VOC Level 6g/L 5g/L 5g/L 187g/L 6g/L

Technology 2-Part

Cementitious Urethane

Acrylic Urethane

Acrylic Moisture Cure Polyurethane

2-Part Cementitious

Tile Adhesive Compatibility

Internal (AS/NZ 3740) Type A, B, C Type A, B, C Type A, B, C Asaflex Type A, B, C

External (AS/NZ 4654) Type A, B Type A, B Type A, B Asaflex Type A, B

Immersed Type A No No No Type A

Compatible Adhesives

Type A Superglue, Ultra Mastik + 50% Megalastic, Evofix + 100% Megalastic, Superfixall + 100% Megalastic, Prontofix + 100% Megalastic, Expressfix + 100% Megalastic

Type B Evoflex, Ultra Mastik, Maxiflex, Conflex, Asaflex, Excelflex

Type C Megafix, Multifix, Mastik