USER S GUIDE - ELHVBneteen).pdf · It will help you to use CD663N computer easily. Please read this...
Transcript of USER S GUIDE - ELHVBneteen).pdf · It will help you to use CD663N computer easily. Please read this...
CONTENTS
Starting 4How to use this manual / Check Items / System Setting
1. System Configuration 7Front Configuration / Rear Configuration
2. Installation 8Plugging Keyboard and Mouse / Plugging the MonitorPlugging the power cord / Plugging the RJ11 Phone line
3. System Specifications 10System Configuration TableSystem Main Board Layout
4. Troubleshooting 25
CD663N(øµπÆ) 00.4.17 2:46 PM ∆‰¿Ã¡ˆ3
1. How to use this manual
This manual is for anyone who wants to setup and configure the PC.
It will help you to use CD663N computer easily.
Please read this guide carefully before you install the system.
• For your safety, remember to turn off the system and to disconnect all
c o rds and cables before opening the system chassis.
• To avoid electric shock, do not open the power supply.
4 Qrium CD663N
Starting
Starting
CD663N(øµπÆ) 00.4.17 2:46 PM ∆‰¿Ã¡ˆ4
2. Check Items
Your box should include CD663N, Keyboard, Mouse, and Power Cord .
Check all the items in your system box.
5Qrium CD663N
Starting
S y s t e m
K e y b o a r d
M a n u a l
M o u s e
Power Cord
CD-ROM Ti t l e
Modem Cable
CD663N(øµπÆ) 00.4.17 2:46 PM ∆‰¿Ã¡ˆ5
3. System Setting
Operate the PC on a Sturdy level surface such as desk or table.
6 Qrium CD663N
Starting
Please do not overload thepower socket
Keep the computer awayf rom high temperature andd i rect sunlight
Please do not place magneticobjects close to the system
Keep distance between thesystem and the wall
Keep the computer awayf rom excessive moistureand dust
Place the system away fro mradio or any electro n i cre c e i v e r s
CD663N(øµπÆ) 00.4.17 2:46 PM ∆‰¿Ã¡ˆ6
1. Front Configuration
2. Rear Configuration
7Qrium CD663N
1. System Configuration
1. System Configuration
Power LED
HDD LED
Power Button
CD-Rom DriveLED
CD-Rom Drive Eject Button
USB Port
USB Port
LAN Line
MIC in
Line out
Monitor out
Tel Line(to the wall)
Adapter Jack
CD663N(øµπÆ) 00.4.17 2:46 PM ∆‰¿Ã¡ˆ7
1. Plugging Keyboard and Mouse
USB Keyboard/Mouse connectors are on the rear panel.
Connect the keyboard cable to one of the USB connectors.
Connect the mouse cable to the other USB connector.
2. Plugging the Monitor
Connect the monitor to the MONITOR connector colored royal blue.
8 Qrium CD663N
2. Installtion
2. Installtion
CD663N(øµπÆ) 00.4.17 2:46 PM ∆‰¿Ã¡ˆ8
3. Plugging the Power Cord
CD663N Computer System applies both 110/220 power range with
automatic Voltage Switching
4. Plugging the RJ11 Phone Line(Modem Cable)
Locate telephone wall outlet. If a telephone is connected, you may need a
telephone splitter cable or connector, Which allows you to connect both
modem cable and telephone cable to the outlet. Plug one of the modem
Cable end connector into Tel Line Socket on the rear of the computer.
Plug the other end of the modem cable connector into the telephone wall
o u t l e t .
9Qrium CD663N
2. Installtion
CD663N(øµπÆ) 00.4.17 2:46 PM ∆‰¿Ã¡ˆ9
1. System Configuration Table
10 Qrium CD663N
3. System Specifications
3. System Specifications
Motherboard
Form Factor
Chipset
CPU TYPE
RAM (SDRAM)
HDD
Video Card
CD-ROM
Sound Card
Fax/Modem
Ethernet Card
Speaker
Mouse
KB
USB Ports
SMPS
BIOS
Manageability
Daewoo CB663FB
FlexATX
Intel i810e
FC-PGA Packaging, Celeron / Pentium III
One 144-pin SODIM SOCKET, MAX 512MB
3.5 Ultra DMA 33/66 EIDE DRIVE
Built-in 3D AGP, UMA with Intel D.V.M Technology
24X slim type
Built-in (AC Link 97)
56K MIni-PCI Type III (combined with Ethernet)
10/100Mbps Miin-PCI Type III (with Fax/Modem)
built-in stereo
USB
USB
Four USB Connectors
60watts, AC-DC
Phoenix PnP BIOS
ACPI 1.0, PCI 2.0, PC 99
CD663N(øµπÆ) 00.4.17 2:46 PM ∆‰¿Ã¡ˆ10
2. System Mainboard Layout
11Qrium CD663N
3. System Specifications
CD663N(øµπÆ) 00.4.17 2:46 PM ∆‰¿Ã¡ˆ11
1. Troubleshooting
• Additional troubleshooting information can be found at
www. datuspc.com for US customers.
12 Qrium CD663N
4. Troubleshooting
ProblemComputer won’t turn on
Blank screen
Monitor doses notfunction properly whenused with energy saverfeaturesSound does not comeout of the speaker orheadphonesSystem will not bootfrom CD-ROM
CauseComputer is notconnected to an externalpower sourceCables to the externalpower source areunplugged
Monitor is not turned onand the monitor light isnot onMonitor without energysaver capabilit ies isbeing used with energysaver features enabledSoftware volume controlis turned down
The CD-ROM boot is notenabled through theComputer Setup utilityNon-biitable CD in drive
SolutionConnect to an external powersource
Ensure that cables connectingthe computer to the externalpower source are pluggen inproperly and the wall outlet isactiveTurn on the monitor and checkthat the monitor light is on
Disable monitor energy saverfeature
Double click on the speaker iconon the tackbar, then set volumeby adjusting the volume sliderRun the Computer Setup utilityand set the drive priorities
Try a bootable CD in the drive
Solving General Problems
4. Troubleshooting
CD663N(øµπÆ) 00.4.17 2:46 PM ∆‰¿Ã¡ˆ12